|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed. |
| 2 | Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 3 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirtingetc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4complete all as specified and directed. |
| 4 | Non skid ceramic coloured tiles7 to 8 mm thick square /rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed. |
| 5 | Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid,bedded or laid bedded pointed in anymortar, all as specified. |
| 7 | 14-16 mm thick, baroda green stone, machine cut laid over & including 15mm thick average thicknesss) cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with grout of matchingshade on kitchen plateform, RCC Counters , stairs , window silland similar situationlike incl making hole for gas pipe including moulding of edges and polishing complete all as specified & directed |
| 8 | Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed. |
| 9 | Reinforced cement concrete 1:2:4 Type B-1 (using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams, balconies, roofs, canopies shelves and the likecomplete all as specified and directed. |
| 10 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified. |
| 11 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 12 | Taking down chowkhats or framen.exc 1.5 Sqm with shutter (without taking off shutters from the frame) complete all as specified & directed. |
| 13 | Taking down chowkats or frame exc. 1.5 sqmand n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 14 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed. |
| 15 | Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc.,complete all as specified and directed. |
| 16 | Factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thickMS sheet, including necessary fixing lugs, hinges, lock strike plate,thress hold bar/flat etc.& one shop coat of primer, and back filled with PCC 1:3:6 type C-1 complete all as specified. |
| 17 | Factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thickMS sheet, including necessary fixing lugs, hinges, lock strike plate,thress hold bar/flat etc. & one shop coat of primer, and back filled with PCC 1:3:6 type C-1 complete all as specified. |
| 18 | Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated, all as specified and directed. |
| 19 | 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge. |
| 20 | Glazed and gauged Skelton shutter (Factory made) 30mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of members of shutters as specified in SSR Part I Section 8, clause8.20 (a) including Kiln seasoned and chemically pressure treated, complete all as specified & directed. |
| 21 | Solid PVC frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogenous fine cellular structure density 550 having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 22 | Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 23 | Factory madesolid PVC board 20-22 mm thick as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, complete all as specified and directed. |
| 24 | Factory madesolid PVC board 18mm thick as in kitchen cabinet, shelves, shutter with 19mm wide PVC leeping pasted at exposed sides, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, complete all as specified and directed. |
| 25 | 100mm size,butt hinges, medium weight, cold rolled mild steel cmplete all as specified & directed. |
| 26 | Butt hinges 100mm size, of extruded aluminum alloy with galvanisedmild steel hinge pin, anodised, type C-21, complete all as specified and directed. |
| 27 | Hasp and staple 100mm size (ISI Marked), safety type aluminum anodized including bolt to hinge plate, all as specified and directed. |
| 28 | 200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 29 | 150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed. |
| 30 | 150 mm aluminium handles cast typecomplete all as specified and directed. |
| 31 | Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 32 | 300mm MS ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed. |
| 33 | Continuous (Piano) hinges of size 30mm(width of flap when open) , mild steel , complete all as specified and directed. |
| 34 | Factory made steel window box type with side hung shutters including box type hinges and oneshop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc as in repairs, complete all as specified. |
| 35 | Factory made steel window box type with side hung shutters including box type hinges and oneshop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixedas in repairs, complete all as specified. |
| 36 | Fixed type ventilator with glazing bar including dismantling & removal from site compelte all as specified and directed. |
| 37 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm in fixed with tinned tacks, complete all as specified and directed. |
| 38 | Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed. |
| 39 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 40 | 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 41 | Framed work such as grill guard bars etc welded to steel frame MS round/square bar conforming to Fe 290 Gde-E 165, including dismantling of old grill guard bar complete all as specified and directed. |
| 42 | Preparation of new or previously untreatedsteel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed. |
| 43 | Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and directed. |
| 44 | Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed. |
| 45 | Applying one coat of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed. |
| 46 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 47 | Demolition of brick work, stone/ bouldermasonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed . |
| 48 | Brick work using old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 49 | All as per item No 48 here-in-before but except bricks |
| 50 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 51 | Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed. |
| 52 | 5mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, complete all as specified and directed. |
| 53 | Rendering 15mm thickin Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 54 | Rendering 15mm thickin Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 55 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper overand including a coat of primer complete all as specified and directed. |
| 56 | Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 57 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 58 | two coats of white wash on ceiling surfaces including preparation of old plastered surfaces complete all as specified and directed |
| 59 | Complete removal of existing treatement andand applying two coats of cement base paint of any tint , complete all as specified and directed. |
| 60 | Preparation of old decorated wall surfaces and applying two coats of oil bound distemper complete all as specified and directed. |
| 61 | Two coat of white wash on wall surfaces including preparation of old surfaces complete all as specified and directed. |
| 62 | Demolition of cement concreteunreinforced exceeding15cm thickness of any description and in any postion (in suken portion)notother wise specially provided forand removal unserviceable materials, debris and rubbishoutside MOD land all as specified & directed by Engineer-in-charge. |
| 63 | Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed brick aggregate as in sunken filling and mass concrete complete all as specified & directed. |
| 64 | Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :-(a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer\"s instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours.(c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours.(d) Pond curing of sunken portion for minimum of 48 hours.(e) Paste one layer of 3mm thick APP membrance with bitumen by torch application to the the treated sunkensurface.(f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound. |
| 65 | Nahani traps 100mm dia with gratingincluding jointing to wastepipe with run led jointed and setting/fixedin cement concrete type B-1 1:2:4 fixedas in repair complete all as specified and directed. |
| 66 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with CP mixer,CP waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 67 | Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed. |
| 68 | Vitreous China Wash down water closet (pedestal pattern) , white, (excluding, flushing cistern and flush pipe) with and including, health faucet,PVC seat cover , fixed as in repair complete all as specified and directed. |
| 69 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, as in repair complete all as specified & directed. |
| 70 | PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. |
| 71 | Towel rail 600mm long ofPTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 72 | Towel ring ofPTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. |
| 73 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repair complete all as specified and directed. |
| 74 | Grating doom 100mm dia of PTMT, fixed to floor trap with cement mortar 1:3, fixed as in repairs, complete all as specified and directed. |
| 75 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs, complete all as specified and directed. |
| 76 | Plate rack of stainless steel sheet 1.0mm thick of size 610mmx 610mmx254mm with steel shelves and hanging arrangements for utensil, fixed as in repairs,complete all as specified and directed. |
| 77 | Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 914mm x 460mm x 203mm, with bowl ofsize 405mm x 354mm x 203mm incl fixing cantilever brackets, fixed as in repairs, complete all as specified and directed. |
| 78 | Taking up ordown steel tubingand connections 15mm bore, complete all as specified and directed. |
| 79 | Taking up ordown steel tubingand connections 20mm bore ,complete all as specified and directed. |
| 80 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed. |
| 81 | Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning ,complete all as specified and directed. |
| 82 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 83 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning, complete all as specified and directed. |
| 84 | 16 mm (outer dia) CPVC pipes,SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors,complete all as specified. |
| 85 | 20 mm (outer dia) CPVC pipes,SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors,complete all as specified. |
| 86 | Cuttingchases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed. |
| 87 | Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 88 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down,screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 89 | stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 90 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repair complete all as specified and directed. |
| 91 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 92 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair,complete all as specified and directed |
| 93 | 25mm dia stainless steelcurtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 94 | PVC(SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, complete all as specified and directed. |
| 95 | 110mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed |
| 96 | PVC(SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to wall including clamp, fixed as in repair complete all as specified and directed. |
| 97 | PVC (SWR) bends any radius 75mm dia with oval acess door, fixed as in repair complete all as directed. |
| 98 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed. |
| 99 | 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished fair and even, without using extra cement complete all as specified and directed. |
| 100 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar complete all as specified & directed. |
| 101 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof), removal of debris complete all as specified & directed. |
| 102 | PCC 1:2:4 type B-1 (20 mm graded stone aggs) as in roof padding, roof kerbsrounded or chamfered on edgescomplete all as specified and directed. |
| 103 | 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil bound bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions and finished complete all as specified & directed. |
| 104 | 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil bound bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, including dismantling of existing felt /treatment, complete all as specified & directed. |
| 105 | Rendering 20mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPCon concrete roofsurfaces including flashings and junction of parapets etc ,finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only). |
| 106 | 40mm thick brick tileswith including 20mm thick cement mortar 1:4 jointedgrouted and pointed complete mixed with crude oil5%by weight of cementcomplete all as specified and directed. |
| 107 | All as per serial item No 106 herein before but except tiles. |
| 108 | Raking out joints/ pointing to brick work in walls or to bricks in cement mortar on edge in floors, surface channels, roofs, etc |
| 109 | Supply only integral water proofing compound complete all as specified & directed. |
| 110 | Plain cement concretetype B-1, 1:2:4 (using 20 mm graded stone aggregate) as in roof kerbs of mud stops, rounded or chamfered on edges including necessary form work, complete all as specified and directed. |
| 111 | Float valve / ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms ) for 20mm bore pipe, fixed as in repair complete all as specified and directed. |
| 112 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, (ISI Marked) hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed. |
| 113 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning works etcand hoisting ifrequired reconnecting and refixing in position of capacity exc 250 ltrs but n.exc 500 ltrs, complete all as specified & directed. |
