Tender For Welcome Maintenance To Offers Md Accommodation And Certain Repair Work At Misc Unit At Madhopur Under Ge Basoli
Tender Value
20 Lakhs
Estimated cost
Bid Submission
03 Jul 2025
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madhopur → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance To Offers Md Accommodation And Certain Repair Work At Misc Unit At Madhopur Under Ge Basoli
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frameswith shutters (w/o takingoff shutters from the frame) n.exc. 1.5 Sqmcomplete all as specified anddirected. |
| 2 | Taking down chowkats or frameswith shutters (w/o takingoff shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm eachcomplete all as specified anddirected. |
| 3 | Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqmcomplete all as specified anddirected. |
| 4 | Taking down shutters and refixing in same openingof any description exc 1.0sqm and n.exc 2.0 sqm complete all as specified anddirected. |
| 5 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified anddirected. |
| 6 | S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading andjointed together with solvent cement supply & fixing in the frame at site complete all as specified anddirected. |
| 7 | S&F in repair PVC board 18-20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc, weight not less than 8Kg/Sqm complete all as specified anddirected. |
| 8 | S&F 5mm thick PVC solid PVC wall liing plain colour PVC Sheet inclusive of solvent cement and PVC Frame as per specificaton complete all as specified and directed. |
| 9 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification complete all as specified and directed. |
| 10 | S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed. |
| 11 | S&F For Plain framed factorymade 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated complete all as specified and directed. |
| 12 | M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm complete all as specified and directed. |
| 13 | M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm complete all as specified and directed. |
| 14 | M&L For PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling of chowkats complete all as specified and directed. |
| 15 | Material & Labour for Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube, factory made with double side shutter wire gauged shutter & glass glazed shutter (wire cloth and glass panesshall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified anddirected. |
| 16 | M&L for Steel window factory made double shutter and tubular moulded frame of 16 mm gauge suitable for double shutter as per drg No CEPZ/TD/245/01 Sheet 1/1 and CEPZ /TD/246/01 Sheet 1/2 ( double for masquito proof one glazed with glazing bars and one gauged without glazing bars) with side hung shutters including projecting type hinges non friction with 3.00 mm thick 100 mm long handle and two nos tower bolts 100 mm long welded on 3.00 mm thick MS plate to each window shutter and including top hung vent shutter at top of glazed and wire gauge shutter welded incl hold fast includingMild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;ailings; framework of water tanks and similar work conforming to Fe.410-0, FE-310-0 andand 10 mm square bar for guard bars grillsincluding two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 17 | S&F Sheet glass, ordinary quality 4mm thick and glazing with oil putty in squares n exc 0.5 sq m in each pane all complete all as specified and directed. |
| 18 | S&F 4.00 mm thick frosted glass,pin headed and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified anddirected. |
| 19 | M&L Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. |
| 20 | S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 21 | S&F Mild steel hinges medium weight cold rolled size 100mm. complete all as specified and directed |
| 22 | S&F 100 mm hasp and staple, Aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 23 | S&F aluminium handle, cast type, anodised ,125 mm size. complete all as specified and directed |
| 24 | S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed. |
| 25 | S&F aluminium alloy, anodised, sliding door with hasp and size 250mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 26 | M&L for Painting to new wooden surfaces including prepration of surface and applying one coat of pink primer and two coats of synthetic paint complete all as specified and directed. |
| 27 | S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed. Cera Cat Part No: Congo B1010112 or equivalent in Jaquar/Prayag/Kohler. |
| 28 | S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified and directed.Cera Cat Part No: COVYNA S3010109 or equivalent in Jaquar/Prayag/Kohler. |
| 29 | S&F in repair 15 mm CP long body bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 30 | S&F in repair CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed. |
| 31 | S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed. Cat Part No: F7020111AB or equivalent in Jaquar/Prayag/Kohler. |
| 32 | S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed |
| 33 | Re-fixing old 15mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed |
| 34 | S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed |
| 35 | Re-fixing old 20mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed |
| 36 | M&L for Rotational moulded polyethylenewater storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic balland 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed. |
| 37 | M&L for Rotational moulded polyethylenewater storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic balland 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed. |
| 38 | S&F sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed complete all as specified and directed |
| 39 | Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 40 | M & LBrick work with sub class `B\" bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed |
| 41 | S&F in repair Vitreous china wash basin white, flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe,complete all as specified and directed. Cera Cat Part No: Cana S2020119 or equivalent in Jaquar/Prayag/Kohler. |
| 42 | S&F in reapir curtain rod 20mm dia ofstainless steelwith andincluding stainless steel brackets, Stops, rollers etc., complete all as specified and directed. |
| 43 | S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore complete all as specified and directed Cera Cat Part No: F2002105 or equivalent in Jaquar/Prayag/Kohler. |
| 44 | S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipecomplete all as specified and directed |
| 45 | S&F in repair wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etccomplete all as specified and directed. Cera Cat Part No: S1053121 or equivalent in Jaquar/Prayag/Kohler. |
| 46 | M & L Rendering 10mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including taking down cement plaster any description raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastered surfaces and applying one coat 1mm thick wall care putty & two coats of distemper oil emulsioncomplete all as specified and directed |
| 47 | M & L Rendering 10mm thick in cement mortar 1:6 and finished even and smooth without using extra cementand preparation of new plastered surfaces and applying one coat primer & two coats of distemper oil emulsioncomplete all as specified and directed |
| 48 | M & L Rendering 10mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including taking down cement plaster any description raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastered surfaces and applying three coat of white wash complete all as specified and directed |
| 49 | M & L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plaster surfaces and applyingtwo coats of cement basepaint on walls over and including a coat of white wash complete all as specified and directed |
| 50 | M & L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cementand preparation of new plaster surfaces and applyingtwo coats of cement basepaint on walls over and including a coat of white wash complete all as specified and directed |
| 51 | M&L Rendering 5 mm thick in CM 1:3, on ceiling,etc. finished even and smooth without using extra cement including taking down cement plaster any description raking out joints, hacking for key and scrubbing down with water etc and preparation of new pastered surfaces of ceiling and applying three coats of white washcomplete all as specified anddirected |
| 52 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 53 | Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 54 | M & L Glazed ceramic colouredtiles in vertical surfaces 450x300x7 mm thick set andjointed in neat cement slurry and pointed in white or coloured cement to matchincluding taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed. |
| 55 | S&F Vitrified ceramic coloured tiles 10 mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed |
| 56 | S&F Vitrified ceramic coloured tiles 10 mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 for laying skirting finishes including taking down plastercomplete all as specified and directed |
| 57 | S&F Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n . Exc 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed |
| 58 | M&L 75 mm thick PCC1:3:6,Type C-2 (using 40mm graded crushed stone aggregate) in plinth protection etc. laid in alternate bays complete all as specified and directed. |
| 59 | M&L Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 15mm thick screed bed of 1:4 cement mortar including 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base, finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed |
| 60 | M&L for complete removal of existing treatment of wall surfaces complete all as specified and directed. |
| 61 | M&L applying 1mm thick wall care putty on old plastered surface and prepare the smooth surface with sand paper complete all as specified and directed. |
| 62 | M&L Applying two coat of white washincluding preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spotscomplete all as specified and directed |
| 63 | M&L Applying two coat of white washincluding preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spotscomplete all as specified and directed |
| 64 | M&L Applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spotscomplete all as specified and directed |
| 65 | M&L Applying two coats of oil bound distemper including preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spotscomplete all as specified and directed |
| 66 | M&L Applying one coat of synthetic enamel paint including preparation of wood and wood based surfaces of any description exc 10cm width or girth complete all as specified and directed |
| 67 | M&L Applying one coat of synthetic enamel paint including preparation of steel and iron surfaces of any description exc 10cm width or girth complete all as specified and directed |
| 68 | S&F chromium plated PTMT shelves fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 69 | S&F in repair chromium plated health faucet ABS body with 1.25 mtr long flexible tube and ABS wall hooking including making connections and fixed in position complete all as specified and directed. |
| 70 | S&Ftoilet paper holder of brass, chromium plated fixed to walls with chromium platedbrass screws complete all as specified and directed |
| 71 | S & F Fancy type Brass Chromium plated, soap dish, complete all as specified and directed. |
| 72 | M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including chamfering, rounding, moulding, hole for gas pipeand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 73 | S & F Plastic water closet seat cover ,white ,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 74 | Supply only Liquid water proofing compound complete all as specified and directed |
| 75 | M&L for Applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.30 ltr/Sqm and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with non -woven polyester matt laid on primed surface by forced application including roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound(WPCshall be measured and paid separately) completewith overlap of 10 cms (overlaps to be thermo fused by flame) complete all as specified and directed |
| 76 | M&L for dismantling of brick tiles, single layer on roofs complete all as specified and directed. |
| 77 | M&L for refixing of brick tiles with bedding in cement mortar 1:6 ,15mm thick and joints grouted in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed. |
| 78 | Materialandlabour forprepration of old surfaces andapplyingtwo coat of cement base paintcomplete all as specified and directed |
| 79 | S&F stop valve cast copper alloy screwed down high pressure with crutchor butter fly handlescrewed both ends for iron pipe with long shank chromium plated concealed type complete all as specified and directed |
| 80 | M&Lpreparation of old surfaces and applying two coats of Acrylic emulsion ( Apex )over a coat of primer complete all as specified and directed. |
| 81 | S&F in repair peg set of Six mild steel complete all as specified and directed |
| 82 | S&F in repair, Continous (piano) hinges, mild steel, bright finish or electro galvanised with width of flap(when open) 30mm complete all as specified and directed |
| 83 | S & F Magnetic catcher for cupboard complete all as specified and directed |
| 84 | M&L for Durastone / Endura heavy duty vitrified tiles of size 322mm x 322mm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and 15mm thick cement screed bed or bedding layer in CM 1:4 including 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base, finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed |
| 85 | S&F in position suspended false ceiling system using E-gridsuspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butter fly clips complete all as specified and directed |
| 86 | S&FBrass knobs 35-40mm dia complete all as specified and directed |
| 87 | S & F drawer rooler channel with wheelcomplete all as specified and directed |
| 88 | S&F Rolled sections as in glazing and clading; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A complete all as specified and directed |
| 89 | M&L in repair to old broken chajjas and facia by removing loose portion of concrete/plaster and making the surfaces in line, level and plumb by applying cement plaster in cement mortar 1:3 of thickness not less than 10 mm thick including dubbing out in the same mortar or in cement concrete1:1.5:3 as per site requirement upto height 8 mtrs and in any position, (including apex paint) complete all as specified. Note : Rate quoted shall be deemed incl for scaffolding/formwork for single/double storey building of height upto 8 mtrs and making good the disturbed services complete all as specified and directed. |
| 90 | Taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed |
| 91 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm complete all as specified and directed. |
| 92 | S&F PVC(SWR) bends any radius of bore 110 mm complete all as specified and directed. |
| 93 | Supply & FixPVC waste pipe suitable for wash hand basin/ kitchen sink/urinal etc complete all as specified and directed |
| 94 | Supply andfixin repair for600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 95 | M&L for water proofing treatment in sunken portion and applying water proofing treatment on horizontal or vertical surfaces by applying bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membarane weighing not less than 3.6 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membarane over sunken portion after cleaning the surfaces by removing dust, dirt etc., as per manufacturers instructions including 15mm thick plaster in CM 1:4 complete all as specified anddirected. |
| 96 | M&L PCC 1:5:10, Type E2 (using 40 mm graded brick bats) in filling of sunken portion complete all as specified and directed. |
| 97 | M&LPCC typeB-0,1:2:4 using 12.5mm graded stone aggregates 25mm thick as subbase complete all as specified and directed. |
| 98 | S&F for 50mm dia GI Medium grade Pipe in sunken portion with all fitting and fixed complete as spouts including cutting hole and making good the same complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Jun 12, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 05, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender