Tender For Withdrawing And Installation Of Pumping Machinery And Other Allied Works At Purusottampur, Kamalpur Rudranagar, Naraharipur, Manasadwip, Nagendraganj, Companirchar And Adjacent W/S Scheme Under Sagar Block Under S.24Pgs Mechanical Division Phe , sagar-West Bengal

Tender For Withdrawing And Installation Of Pumping Machinery And Other Allied Works At Purusottampur, Kamalpur Rudranagar, Naraharipur, Manasadwip, Nagendraganj, Companirchar And Adjacent W/S Scheme Under Sagar Block Under S.24Pgs Mechanical Division Phe Dte. - 1 Carrying standby 5/7.5/10/12.5 HP pump-motor set from Deptt store to worksite including loading and unloading at both ends all complete. 2 Hiring of derrick arrangement 3 Withdrawing the damaged 5/7.5/10/12.5 HP pump motor set along with coloumn pipe assembly from said T/W by proper lifting arrangement with derrick arrangement after disconnection of power line and delivery line. 4 Lowering the dept.supplied 5/7.5/10/12.5 HP pump motor set at said T/W by proper lowering arrangement with derrick arrangement including joining the cable end making all connection complete. 5 Carrying damaged 5/7.5/10/12.5 HP pump-motor set from the P/Hto deptt store including loading and unloading at both ends all complete. 6 Supply delivery & fitting fiixng of the following items:- (Rate is inclusive of @ 5% riverine charges) Make;- Any approved vendor of PHED 7 1.1 KV grade 4 sq.mm x 3 Core water proof flat submersible cable 8 25 mm dia Nylon rope 9 3 mtr long 80mm dia UPVC column pipe [Cream colour] with both side threaded and one end side socketed with registered KPMG. 10 1.5 mtr long 80mm dia UPVC column pipe [Cream colour] with both side threaded and one end side socketed with registered KPMG. 11 80mm dia CI top & bottom adopter 12 80 mm dia x 150 mm long GI short piece -1 no. and 65 mm dia x 80 mm dia GI enlarger - 1 no. 13 Supply & Delivery at site of 100 Amps 415 V TPN rewireable type switch fuse unit 4 Nos and 100 amps 415 V 4 pole changeover swich ( side handle ) 4 Nos as per direction ( Make- Approved vendor of PHED) 14 Supply & Delivery at site of 63 amps 4 pole 415 volt with braking capacity 50 KA MCCB with adjustable overload & short circuit protection including enclosure. 15 Supply & delivery of pressure gauge 150 mm dia (0-7 Kg / Sq cm] brass cock and fitting complete [ This cost includes 15 mm dia G.I pipes and specials] 16 Supply and delivery at site Rewireable kit kat 100 Amps 415 V ( porcelain carrier and base) Make- approved vendor of PHED ) 17 Supply & delivery of Overload relay range 13-2-20.0AmpContactor type-NONContactor rating-25 AmpProtection includingphase failure phase imbalance & phase Reversal, short circuit protection through MCBAmmeter & voltmeter suitable ratingOn/off and trip indicatorpower coated enclosure with PU gasket ensuring excellent finish and reliabilityProvitional for connecting dry run preventorMake-BCH/any approved make of PHED 18 Supply & delivery of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification: 19 PumpDuty condition-24 M3/hrHead- 56 MtrShaft-stainless steelImpeller- S.S/ BronzeOutlet Size: 50 mm.Motorsubmersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPM=5 HPMotor must be suitable for operation with star Delta starter. Make -KSB/ Texmo/ Pluga/BG/Any approved vendor of PHED 20 Supply & fitting fixing of 18w LED tube light including electrical connection complete 21 Carrying damaged 5/7.5/10/12.5 HP pump-motor set from deptt store to Kolkata workshop including loading and unloading at both ends all complete. 22 Dismentling the damaged pump motor set at workshop for necessary repairing of the same. 23 Supply of following spares for pump. 24 Shaft sleeve (SS) 25 Suction cage bush (GM) 26 Neck Ring(GM) 27 Pump stage bush (GM) 28 Reassemble the pump set with newly supplied materials in item no ( 8.01-8.04) and old seviceable spares as per direction of EIC. 29 Supply of following spares for the motor. 30 Top bush (GM) 31 Bottom bush (GM) 32 Thrust bearing 33 Charges for motor grinding 34 Rewinding the motor by supplying suitable gauge PVC insulated copper wire & by other required materials as per direction of EIC. (The rate has been derived after deducting the cost of old damaged Cu wire) 35 Reassemble the motor after rewinding with newly supplied materials in item no (9.01- 9.03) and old serviceable spares as per direction of EIC. 36 Painting the pump motor set after repair & reassemble by supplying oil bound paint after scraping out the old paint rust as per direction. 37 Carrying the repaired pump motor set from workshop to deptt storeincluding loading and unloading complete. 38 Add GST @ 18% 39 Add CESS @ 1%

Refer document

INR 22000.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB