Tender For ACR Pre Primary,Science Lab at High School Semthan, Anantnag. -- 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : 2 Providing & laying of stone soling hand packed in foundation trenches i/c all carriages, loading, unloading, etc. complete job. 3 Providing and laying in position cement concrete of specified grade M-7.5 excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), i/c all carriages, loading, unloading, etc. complete job. 4 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size), incl. carriages, complete. 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size), incl. carriages, complete. 6 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), incl. carriages, complete. 7 Centring and shuttering including strutting, propping etc and removal of form work:Foundations, footings, bases of columns etc. for mass concrete. 8 Walls (any thickness), including attached buttresses, plinth and string courses etc. 9 Suspended floors, roofs, landings, balconies and access platforms. 10 Edges of slabs and breaks in floors and walls Under 20 cm wide 11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 12 Supplying and filling in plinth with Boulders/GSB under floors including, watering, ramming, consolidating and dressing complete. 13 Brick work with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand), incl. carriages, complete. 14 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): imported wood 15 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling, all complete as per direction of Engineer-incharge. (Note: -Butt hinges and necessary screws shall be paid separately).35mm thick imported wood. 16 Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, incl. fixing of 4mm thick float glass panesexcluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).35mm thick imported wood. 17 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: imported wood 30mm. 18 15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar), incl. carriages, complete. 19 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand), incl. carriages, complete. 20 Providing and applying white cement based wall putty of avg.2mm of approved brand and manufacture. 21 Distempering with oil bound washable distemper of a and manufacture to give an even shade on New wor coats) over and including priming coat with water thinnable primer of approved brand (two or more coats) 22 Applying priming coat: With ready mixed pink or grey primer of appr manufacture on wood work (hard and soft wood) approved brand. 23 Applying priming coat:With ready mixed red oxide primer of approved brand and manufacture on steel galvanised iron/steel works. 24 Painting with synthetic enamel paint of approved manufacture to give an even shade two or more coats on wood / steel works. 25 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (600*600mm) 26 Providing and laying Polished Granite stone floori design and patterns, in linear as well as curvilinear building all complete as per the architectural drawin thick stone slab over 20 mm (average) thick base of 1:4 (1 cement : 4 coarse sand) laid and jointed with ce pointing with whitecement slurry admixed with pigme shade including rubbing, curing and polishing etc. a specified and as directed by the Engineer-in-Charge, P stone slab jet Black, Cherry Red, EliteBrown, Cat Eyeng in required portions of the gs with 18 mm cement mortar ment slurry and nt of matching ll complete as olished Granite or equivalent. 27 Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in Charge. Granite Work 28 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Including Imm thick MS Sheets for sofits and eaves boarding. 29 Providing colour coated High Rib roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (0.50mm thick) 30 Providing ridges or hips of width 60cm overall width colour coated steel, sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.2.4.2 0.50 mm thick with zinc coating not less than 275 gram/m2 31 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1) cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominali size), incl. carriages, complete. 32 Providing and fixing of bright finished brass hardware fittings:125 mm Handle 33 200 mm Handle 34 100x10mmTower bolt 35 250x10mm Tower bolts 36 Stay hooks 37 L-Dop 18 with inbuilt Locking system 38 Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper
