Repair And Renovation Work Of Bullock Cart Project , Repair And Renovation Work Ofbullock Cart Project , Providing And Laying In Situ Four Course Water Proofing Treatment With App (Atactic Polypropylene) Modified Polymeric Membrane Over Roof Consisting Of First Coat Of Bitumen Primer @ 0.40Kg Per Sqm, 2Nd And 4Th Courses Of Bonding Material at 1.20 Kg/Sqm, Which Shall Consist Of Blown Type Bitumen Of Grade 85/25 Conforming To Is : 702, 3Rd Layer Of Roofing Membrane App Modifiedpolymeric Membrane 2.0Mm Thick Of 3.00 Kg/Sqm Weight Consisting Of Five Layers Prefabricated With Centre Core As 100Micron Hmhdpe Film Sandwiched On Both Sides With Polymeric Mix And The Polymeric Mix Is Protected On Both Side With 20Micron Hmhdpe Film. (With 5 Yearsservice Guarantee). , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means Over Areas (Exceeding 30Cm In Depth. 1.5M In Width As Well As 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottom Disposal Of Excavated Earth, Lead Up To 50M And Lift Up To 1.5M, Disposed Earth To Be Levelled And Neatly Dressed.(No Extra Lift Is Payable If Work Is Done By Mechanical Means) All Kinds Of Soil , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc. Upto Floor Two Level,Excluding The Cost Of Centering, Shuttering And Finishing : , M-10 Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete (Nominal / Design Mix With 20Mm Nominal Size Graded Stone Aggregate) Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , 5.1.1 M-20 M-20 Grade Concrete , Reinforced Cement Concrete Work (With 20 Mm Nominal Size Graded Stone Aggregate) In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars,Posts And Struts Etc. Above Plinth Level And Upto Floor Two Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement: , 5.2.1 M-20 M-20 Grade Concrete , Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding Including Cost Of Binding Wire All Wastages And Overlaps, Couplers (Overlaps Shall Be Provided As Per Requirement Of Is 13920 For Ductile Detaling Is 456 Rcc Design & Sp 34 Reinforcement Detailing ) Etc. Complete . Thermo-Mechanically Treated Bars. Fe 500 Conforming To Is 1786. , Centering And Shuttering In Cluding Strutting, Propping Etc. And Removal Of Form For: , Foundations, Footings, Bases Of Columns, Etc. For Concrete Upto Plinth Level , 5.9.2 Walls Walls (Any Thickness) In Cluding Attached Pilasters Butter Esses, Plinth Beams And String Courses Etc. , Suspended Floors, Roofs, Landings, Balconies And Access Platform. , Columns, P I L L A R S , Piers, Abutments, Posts And Struts. , Brick Work With Well Burnt 25Kg /Cm2 Chimney Bricks In Bulls Pattern Trench Kiln, Crushing Strength Not Foundation And Less Than 25Kg /Cm2 And Water Plinth Absorption Not More Than 20% In Foundation And Plinth I/C Curing Etc Complete. , 6.3.2 Cm 1:6 Cement Mortar 1:6 (1 Cement:6 Sand). , Supplying And Filling In Plinth With Crusher Stone Dust / Coarse Sand Under Floors Including, Watering, Ramming And Compacting In Layers Not Exceeding , 12Mm. Thick Cement Plaster In C:M 1:6(1 Cement:6 Sand) , 15Mm. Thick Cement Plaster In C:M 1:6 (1 Cement:6 Sand) , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Providing And Laying Vitrified Floor-Tiles Full Body Design Homogenous Body Matt/Rustic Finish In Different Size With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, 1St Quality/ Premium Quality In Flooring Laid On 20Mm Thick Cement Mortar 1:4(1Cement :4Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete In Light Colour And Shades As Ivory, Beige Blanco Grey Etc. 11.80.1.1 , (A) Size 300X300 Mm Thickness 9-10 Mm , (B) Size 600X600mm Thickness 9-10Mm , Providing And Laying Vitrified Floor Tiles Multi/Double Charged (Minimum Top Layer Thickness 2.0Mm) Neno Polished Self Design, In Different Size With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours & Shades, 1St Quality/ Premium Quality In Skirting, Dado And Wall Lining Laid On 12Mm Thick Cement Mortar 1:4(1Cement :4Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete Plain Ivory Light Shade Size 600X600mm Thickness 9-10Mm , Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/Ltr Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per Manufacturers Specification. Two Or More Coat On New Work. , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand Over The Plastered Wall Surface To Prepare The Surface Even And Smooth I/C All Cost Of Material, Labour And Scaffold Etc In All Position Complete. , Wall Painting By Any Mechanical Or Manual Means With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work , Finishing Walls By Any Mechanical Or Manual Means With Acrylic Smooth Exterior Paint (Economy Exterior) Of Required Shade Including All Scaffolding. New Work (Two Or More Coat Applied @ 1.67Ltr/10Sqm Iver And Including One Coat Undiluted Exterior Waterproofing Coating @ 2.39 Litre/10 Sqm With Crack Bridging Ability Of Upto 0.5Mm On Horizontal Surfaces With An Elongation Of 150% And Water Proofing Of Upto 3 Bars On Vertical Surface , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : Old Work (Two Or More Coat Applied @ 1.67 Ltr/ 10 Sqm) On Existing Cement Paint Surface). , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete Including The Cost Of Providing And Fixing Necessary 27.5Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To I.S. 4454- Part-1 And M.S. Top Cover Of Required Thickness For Rollingshutters. 80X1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover.1850 , Providing And Fixing Ball Bearing For Rolling Shutters. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineerin- Charge. Concealed Work Including Cutting Chases And Making Good The Walls Etc. , 20 Mm Nominal Outer Dia .Pipes. , 25 Mm Nominal Outer Dia .Pipes. Metre 288.00 , Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require : White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing White Vitreous China Anti Germ Fluoro-Polymer Coated Water Closet Squatting Pan With 100 Mm Sand Cast Iron P And S- Trap, And 7.2 Liter Low Level, Dual Flush, Pp (Poly Propylene) Made Open Slim Wall Hung Cistern Capacity 3 Liter/6 Liter Flushing, With All Fittings And Fixtures Complete Including Cutting And Making Good The Wall And Floors Wherever Required. White Vitreous China Anti Germ Fluoro-Polymer Coated Orissa Pattern W. C. Pan Of Size 410X515x255 Mm With Integral Foot Rests. (Premium Range) Each 4392.00 , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pipe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Is : 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Wherever Required Single Half Stall Urinal With 5 Litre P.V.C. Automatic Flushing Cistern. , Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is: 8931And Weighing Not Less Than 400Gm, 15 Mm Nominal Bore. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top,Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately For Fixed Portion. Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , For Shutters Of Doors, Windows And Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing 12Mm Thick Pre-Laminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conformingto Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminium Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc.Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge. Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item) : With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10 Kg/Sqm) , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315, Having Brand Logo Embossed On The Body /Plate With Double Spring Mechanism And Door Weight Upto 125 Kg., For Doors, Including Cost Of Cutting Floors , Embedding In Floors As Required And Makinggood The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer-In-Charge : With Brass Cover Plate - Minimum 1.25 Mm Thickness , Providing & Fixing False Ceiling At All Heights With Grg (Glass Fibre Reinforced Gypsum) False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Moisture Content Less Than 2%, Humidity Resistance Of 99%, Nrc0.50 To 0.75 As Per Is 8225:1987, Noncombustible As Per Bs 476 (Part 4)- 1970 And Light Reflectance Of 85% (Minimum) To Be Laid In True Horizontal Level Suspended On Interlocking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main-T Runners Of Size 15X32 Mm Of Length 3000 Mm, Cross - T Of Size 15X32 Mm Of Length 1200 Mm And Secondary Intermediate Cross- T Of Size 15X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, 8 Mm Outer Diameter M- 6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Ofsize 85X25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40 Mm Long Dry Wall Wood Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In- Charge. With Semi Perforated 12Mm Thick Micro To Regular Edged Grg False Ceiling Tiles , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100Mmx37mm With Wall Thickness 2Mm (±0.2Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos. Of Plastic Brackets Of Size 75Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Style By Inserting Pvc Profile Of Size 28Mm X 30Mm, With Wall Thickness 2 Mm (±0.2Mm). Lockrail Of Size 100Mmx37mm, Wall Thickness 2Mm (+0.2Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100Mmx20 Mm, And Inserting 2 Nos. Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. Toilet Doors , Providing And Fixing, Factory Made, Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75Mmx53 Mm, Having Wall Thickness 2.0Mm (±0.2Mm). Both Verticals Sides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28Mm X 30Mm X2mm Thickness (± 0.2 Mm) And 75Mmx200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos. Of 125Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos. And Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge. Toilet Door Frames , Supplying &Installation Of Required Capacity Of Single Phase, 50 Hz, 220V, Deep Well Submersible Pump Stainless Steel Body, As Per Is Of Approved Make, Suitable For 4/6 Tube Well With Control Panel Starter Suitable For Submersible Pump With Dry Run Protection, Connections, Including Clamp, Bore Cap Etc. As Required As Per Specifications But Excluding Pipe, Ss/Nylon Wire Rope And Connection Cable 1 Hp With 7-8 Stages, Head Metre 61-18, Discharge Lpm 25-90 , Supplying And Laying Of Approved Make Hdpe Pipe As Per Is:4984 And Is:14333 With Latest Amendment For Installation Of Submersible Pump With Necessary Connection, Socket/Couplings, Tees, Etc. As Required (Pe-63 & Working Pressure 6 Kgf/Sq Cm) 39.4.1 25 Mm 25 Mm Outer Dia. , Supplying And Laying Of Submersible Flat Cable Isi Marked 3 Core Copper Wire Of Suitable Size With Proper Clamping Of Approved Make. 39.3.1 2.5 Sq.Mm 2.5 Sq.Mm Multi Strand , Supplying And Laying Of Approved Make Nylon Rope 12 Mm Thick Complete With Binding For Support Of Pump And Motor.
