Tender For General-Truss Work And Painting Gramanyayalay Vaikom- Nanadam-Truss Work And Painting Gramanyayalay Vaikom- Nanadam-General Civil Work, Vaikom-Kerala
TDR : 49619215
Tender Notice
BOQ
Expired
Vaikom
Kerala
Tender For General-Truss Work And Painting Gramanyayalay Vaikom- Nanadam-Truss Work And Painting Gramanyayalay Vaikom- Nanadam-General Civil Work
Work Name:GENERAL-Truss work and painting Gramanyayalay vaikom- Nanadam-Truss work and painting Gramanyayalay vaikom- Nanadam-General Civil Work
Sl. No.
Item Description
1
Maintenance
2
14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
3
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
4
14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
5
14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface
6
OD282042/2024-2025:Providing and laying water proofing treatment in terrace by applying unique heat reflecting roof water proofing coat of high quality material .firstly ,Apply self priming coat of water proofing compound (diluted with water in 2:1 ratio).secondly applying 2 coats of water proofing compound with same application coverage in perpendicular direction to that of the first coat without water dilution and finally allow system allow 7 day curing .
7
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
8
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
9
OD312372/2024-2025:Finishing with Epoxy paint (two or more coats)at all locations prepared and applied as per manufactures specifications including appropriate preparation of surface. on steel work
10
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
11
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
