}

Tender For M/O Sewerage (Two Year Repairing Of 90 Hp Kishor Make Submersible Pump (At Sps-69) Noida - Repairing And Rewinding Of 90 Hp Submersible Pump...Motor Rewinding With F Class Insulation 2 Winding Thermostat 140+5 On/Off Auto Cut 3 S/F Upper Me, noida-Uttar Pradesh

New Okhla Industrial Development Authority has published Tender For M/O Sewerage (Two Year Repairing Of 90 Hp Kishor Make Submersible Pump (At Sps-69) Noida - Repairing And Rewinding Of 90 Hp Submersible Pump...Motor Rewinding With F Class Insulation 2 Winding Thermostat 140+5 On/Off Auto Cut 3 S/F Upper Me. Submission Date for this Tender is 24-06-2025. Sewerage Construction Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

49615392
Tender For M/O Sewerage (Two Year Repairing Of 90 Hp Kishor Make Submersible Pump (At Sps-69) Noida - Repairing And Rewinding Of 90 Hp Submersible Pump...Motor Rewinding With F Class Insulation 2 Winding Thermostat 140+5 On/Off Auto Cut 3 S/F Upper Me
Tender
Indian
Uttar Pradesh
Noida
24-06-2025

Tender Documents

Tender Details

M/O Sewerage (Two Year Repairing Of 90 Hp Kishor Make Submersible Pump (At Sps-69) Noida - Repairing and Rewinding of 90 HP Submersible Pump...Motor Rewinding with F class insulation 2 Winding thermostat 140+5 on/off auto cut 3 S/F Upper mechanical seal 4 S/F Lower mechanical seal 5 Cable Protector 6 S/F O Ring Set 7 S/F Oil 8 S/F Terminal Block 9 S/F Spring Washers 10 S/F CIR Clip 11 S/F Adjustment Screw 12 S/F Top Cover 13 S/F Bottom plate 14 S/F D.I. Impeller 15 Motor Dismentling and Assembling including labour Charges 16 S/L of aluminium conductor PVC insulated armoured served, sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by Engineer-Inchargecomplete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 17 S/L of 3 core standered aluminium conductor XLPE (cross linked polythene) insulated PVC bedded, Galvanised flat steel strip aroured cable confirming to IS : 7098 (Part-II with latest amendmrnts) 11 KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand alround and protected with well burnt bricks on sides and on top put across. The armourning of cable shall be properly connected with earth conductor by clamps etc. 120 sqmm 3 core 18 S/F of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I. 400 Sqmm 19 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required120 sq.mm 20 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required120 sq.mm 21 Submersible Cable motor capacity up to 75 HP to 120 HP (2 x (35 sq.mm x 4 core) + 1 x 1.5 sq.mm 4 core) 22 S/F 250 Amp 3 Pole MCCB uP Type, 50 KA (MAKE- L&T. C-POWER / D-SINE) / SIEMENS (3WL / VL) / SCHNIEDER (MASTERPACT / NSX) Only FOR STP 23 S/F 400 Amp 3 Pole MCCB uP Type, 50 KA (MAKE- L&T. C-POWER / D-SINE) / SIEMENS (3WL / VL) / SCHNIEDER (MASTERPACT / NSX) Only FOR STP 24 S/F of 3 Pole Power Contactor AC3 185 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 25 S/F of 3 Pole Power Contactor AC3 225 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 26 S/F of APFCR Relay 5 Amp. 415V 3 Stage (MAKE- L&T / SIEMENS / SCHNIEDER) 27 Supply and Fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 60 to 72 watt. Confirming to IP 66 protection complete in all respects. 28 Timer Make L&T make 29 MPD Make soft Hard 30 VPD Make soft Hard 31 Rewinding & repairing of 400 KVA Transformer Kirlosker make / Equivalent make as per original winding 11/.433 K.Volt with super enameled copper wire as required gauge complete all respect as per direction of Engineer in Charge. It it also include the dismantling / Refixing/Cartage from site to workshop / factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR) 32 S/F Fresh Transformer Oil as latest specification of Savita Make

Key Value

Document Fees
INR 2124 /-
EMD
INR 86000.0 /-
Tender Value
INR 42.96 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail