|
| 1 | Demolition of brick work built in cement mortar. |
| 2 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work |
| 3 | Demolition of cement concrete n exc. 15cm thick (unreinforced). |
| 4 | Dismantling of AC sheet (corrugated or semicorrugated) in roof coverings.. |
| 5 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m for foundation in Hard/Dense soil. |
| 6 | M/L Hardcore of gauge n.exc. 63mm deposited, spread and levelled n.exc. 15 cm thick of broken bricks. |
| 7 | M/L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar. |
| 8 | Taking down of cement plaster on brick wall includig taking out joints, hacking for key, scrubbing down with water etc. alongwith brushing with neat cement slurry @ 3 Kg of cement per Sqm and Rendering 15mm thick on fair faces of brick work or concrete surfaces with 1:4 cement plaster and surface to be finished even and smooth (without using extra cement) |
| 9 | Brushing neat cement slurry with 3.0 kg per. Sqm and rendering 15 mm thick plaster on brick or concrete surface and surface to be finished even and smooth without using extra cement with 1:4 cement mortar on new surface. |
| 10 | Providing PCC 1:1.5:3 type A-1 (20mm graded aggregate) |
| 11 | Deformed or twisted mild steel bars 10mm dia and over, cut to length, bent to shape and binding with mild steel wire (annealed) not less than 0.9mm dia. |
| 12 | Providing RCC in slabs type M-20, 1:1.5:3 (20mm graded aggregate). |
| 13 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete |
| 14 | S&f of 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood orsteel framing with plain 40 mm lap jointswith riveted or welded seams, including bendingor turning up, mitred angles, etc. as required |
| 15 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 16 | S/F sheet glass ordinary quality and glazing in square n. exc. 0.5 sqmin each pane of 4.0 mm thick. |
| 17 | Preparation of old painted steel surfaces and applying two coats of synthetic enamel paint. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss). |
| 18 | Preparation of old painted wooden surfaces and applying two coats of synthetic enamel paint. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss). |
| 19 | Applying 3mm thick wall care putty on wall surfaces with making completesmooth surface.Make:Birla /J.K.Wall Putty. |
| 20 | Preparation of old painted surfaces and applying two coat of exterioremulsion paint on wall surfaces as approved over one coat of primer. Make: Asian (Apex Ultima)/ Berger (Weather coat all guard) |
| 21 | M & L for screed bed or bedding layer of mortar 15 mm thick cement mortar 1:4 for laying finish. |
| 22 | S/F Non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floors etc. set & jointed in neat cementslurry and pointed incoloured cement and joint free. Make: Johnson/ Kajaria |
| 23 | M/L Glazed coloured ceramic digital tiles in vertical surface 350x250x7/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement. Make: Johnson/ Kajaria |
| 24 | S/F 20mm thick granite work in jambs fixing with 1:4 cement plaster including pigment. |
| 25 | M/L of Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments. |
| 26 | M/L of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes coforming to IS 1161-1979 grade St.-240. |
| 27 | S/F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of minimum 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. Make- Tata/ JSW. |
| 28 | Taking down old doors including shutter exc 1.5 sqm but n.exc.4sqm and refixing. |
| 29 | Cutting chases, pinning in and making good in 1:3 cement mortar on brick wall n.exc. 10cm girth. |
| 30 | Cutting holes in brick wall built in cement mortar exc. half brick but not exc. one brick and making good . |
| 31 | S/F of cPVC 15mm dia tube medium grade with all fittings fixed complete to wall and ceiling or laid on floor. Make: supreme/finloex |
| 32 | S/Fof cPVC 20 mm dia tube medium grade with all fittings fixed to wall & ceiling or laid on floor. Make:supreme/finloex |
| 33 | S/F chromium plated bib tap 15mm, fancy type. Make- Plumber/Jaquar |
| 34 | S/F of mixture divertor cast copper alloy with capstan head, chromium plated, screwed down high pressure and fixed to 15 mmdia pipe fancy type. Make- Plumber/Jaquar |
| 35 | S/F Pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure and fixed to 15 mmdia pipe fancy type. Make- Plumber/Jaquar |
| 36 | S/F Gun metal globe or gate valves with iron wheel head, screwed both end fixed to pipe of 15 mm dia. |
| 37 | S/F Gun metal globe or gate valves with iron wheel head, screwed both end fixed to pipe of 20 mm dia. |
| 38 | S&Ftwo way bib cock cast copper alloy fancy type chromium plated .Make :Hindware , Model: Flora or equivalent |
| 39 | S/F vitreous china table top wash basin, includingwaste pipe and all fittings and fastenings. Make Hindware, Model: Magna (10079) or equivalent |
| 40 | S&F Paper holderMake: Matrix, Model: Boxeror equivalent |
| 41 | S&F bathroom set (Towel rail, towel rod, towel ring, soap dish & hook) chromium plated. Make: Matrix , Model : Oscar or equivalent |
| 42 | S/F of bevelled edge mirror of selected quality glass, fancy type. |
| 43 | S&F Vitreous China commode (one piece closet) with cistern pedestal patternincludingseat coverwith all fittings. Make: Hindware, Model: Waveor equivalent |
| 44 | S&F health faucet chromium plated. Make : Hindware, Model No F-160013 or equivalent |
| 45 | Rotational moulded polyethylene water storage tank of 1000 ltr capacity(cylindrical vertical with closed top) hoisted and fixed in position all asspecified Make Sintex/Polyplast |
| 46 | PVC (SWR) 110 MM bore pipe single socketed with rubber ring joints fixed to wall, floor etc. Make- Supreme/Prince/Finolex or equivalent |
| 47 | S/F PVC (SWR) bends any radius of 110 mm.Make: Supreme/Jindal as directed by EIC. Make- Supreme/Prince/Finolex or equivalent |
| 48 | S/F PVC (SWR) pipe single socketed in any length with rubber ring joint laid in trenches or in floor of 75mm dia. Make- Supreme/Prince/Finolex or equivalent |
| 49 | S/F 110 mm dia PVC (SWR) ‘T’ single junction. Make- Supreme/Prince/Finolex or equivalent |
| 50 | S/F stack clamps out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe. |
| 51 | S/F of Grating doom 125mm dia with waste hole of PTMT. (Minimum weight 40gms). Make- Supreme/Prince/Finolex or equivalent |
| 52 | S/F of PVC connections 15mm size with PTMT nuts of length 450mm. Make- Supreme/ Prince/ Finolex or equivalent |
| 53 | Surface excavation in hard/ dense soil n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out. |
| 54 | Continuous brick edging; with width equal to thewidth of the brick; laid dry on end vertically. |
| 55 | M&L 25 mm thick Flush shutters, solid core construction, with block board core and plywoodface panels, one face is covered with decorative face veneer with lipping/frame to match. |
| 56 | Aluminium anodised, barrel tower bolts of extruded section and fixed, size 100mm |
| 57 | Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-12, size 75mm |
| 58 | Brass handles, cast type, polished bright |
| 59 | Providing and fixing Aluminium framed half glazed door with chowkhat section (63.5mm x 38.10 mm) & 2 mm thick, shutter\"s top & bottom section of 83.5mm x 44.5mm x 1.5 mm thick,middle & verticalmember of section of 44.5mm x 44.5 mm x 1.5 mm thick (Make: Hindalco, Jindal, Century) with aluminium snap beading & rubber packing for glazing/panelingetc and 5.0 mm thick float glass (Make: Saint Gobain/Modi Guard) in upper half portion and ACP sheet in lower half including screwless aluminium glazing clips, and all necessary aluminium fittings like hinges, handles, tower bolt, door stopper, etc. |
| 60 | Providing and fixing Aluminium Partition consisiting of continous row of 02/03 panels as directed (Make: Hindalco, Jindal, Century). The section will consist of bottom sections of 83.50 mm x 44.45mm x 1.5 mm and other horizontal & vertical sections of 44.45 mm x 44.45mm x 1.5 mm thick hollow anodised with snap beading & rubber packing for glazing/panelingetc and 5.0 mm or more thick glass (Make: Modi Guard/Saint Gobain) including providing screwless aluminium glazing clips. Filling up of the gap at junction, top bottom & sides with required PVC/Neoprene finishing of work/joints shall be smooth. Any other material/fitting/fastener etc. required for execution of work shall be incorporated by the contractor without any additional cost. |
| 61 | S & F of Triple pole and neutral 8 way Double Door DB with 200 amps rated busbar. Make:ABB/Legrand/Schnider/LK/Siemens. |
| 62 | Supply and fixing 415V 10KA \"C\" curve miniature circuit breaker (MCB) TPN 40 To 100 AMP current carrying capacity in the DB complete with connection testing and commissioning. Make should be of LK, Siemens, ABB. |
| 63 | Supply and Fixing of MCB SP 6-32 Amps C-Curve Make should be of L&T, Siemens, ABB. (to be fitted in TPN DB and garden/street light box). |
| 64 | Material and labour for dismantling of existing SPN DB and relocation/installation at another nearby site with requisite maintenance and customized build MS angle (size: 50x50x5mm) framework/bracket of height 2.5 Mtr.with a suitable size MS/PVC protection top hood, duly painted and grouting at siteas directed by EIC/WIC. |
| 65 | Supply & Fixing of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long). One-Fifth of the pole length to be grounded in the earth. Grounding of each poles shall be done by using 0.5 mtr. dia & 2 mtr. length cement concrete. All poles shall be painted of two coats of red oxide primer out side and internally black bituminous paint through out and externally painting of one coat with aluminium painting, including provision of black and white strip width & height of strip as directed by WIC/EIC on poles up to 1.5 m tr high above coping level. Make of pole shall be: National or other reputed make as approved by WIC & EIC. |
| 66 | Fixing only LED flood light 70 - 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. (Note: Supply of LED flood light is not included in bidder\"s scope) |
| 67 | S&F of street light four arm bracket suitable to fix on top of steel tubular pole type 410 SP-22 (8.5 meters long), mounting part on pole should not be less than 30 CM and arm length shall not be less than mtr 0.5 mtr as per site requirement, made up of MS angle of size not less than 50x50x5mmwith welded cap & fixtures, painting with two coats of aluminium paint over a coat of red oxide primer. |
| 68 | Supply & Laying of 40 MM heavy duty GI pipe for cable protection from bottom level of cable trench to sintex pole box with suitable size clamps. Make: TATA/JINDAL/SAIL or substantial equivalent. |
| 69 | Supply and Fixing of pole box for street light, dust and vermin proofmake Syntex model GSJB 3020 or substantial equivalent make complete with aluminum bus bar 04 nos./4pole connector of capacity 200 amps on epoxy insulators includingMCB channel for street light connectionincluding suitable clamps & suitable size brass chrome plated glands-02 nos at bottom for cable entry and exit complete all as specified and as directed. Make: Sintex / Havells or substantial equivalent. |
| 70 | Material and Labour for painting of Steel tubular swaged poles type 410 SP-22 (8.5 metres long or more) with two coats of red oxide primer out side and externally painting of one coat with aluminium painting, including provision of black and white strip width & height of strip as directed by WIC/EIC on poles up to 1.5 mtr high above coping level and dismantling of existing fittings & brackets, cutting/shaping the pole as directed to match with the new pole height as directed. |
| 71 | Supply & Fixing of post top lantern in soothing moon finish made up of Polycarbonate, Upto 1 N x 20 W LED Lamp & B22 base or holder. Make: Havells [ATHENA 3 (MOON) Part No. LHDC11126099] or substantial equivalent in Philips / GE or other reputed make as approved by WIC & EIC. Design of lights shall be selected and approved by WIC & EIC during execution of work. |
| 72 | Supply and Fixing of 20W, B22 base, 230V AC LED Bulb cool white light. Make: Philips / GE / Havells or substantial equivalent. |
| 73 | Supply & Fixing of 65mm or suitable dia with 2 mm thickness heavy duty GI pipe for fixing of gate post light, security/post lantern light and road crossing purpose. Make: TATA/JINDAL/SAIL or substantial equivalent. All required items/work like cutting of pipe as per required size, drilling, fastners, nut-bolts, clamps, GI/MS Grouting plates duly welded at the bottom of the pipe etc. complete for fixing of light poles shall be in the firm scope. |
| 74 | Supply and Fixing of heavy duty rain & dust proof (IP65 as per lS/lEC 60529:2001 latest) plastic box with cover of suitable size (Max. 132mmX132mmX75mm) with MCB fitting channel, four terminal connectors and mounting clamps for cable termination of garden & security lights. Make:ABB/Ajmera/Havells/Crompton/Anchor or substantial equivalent. |
| 75 | Supply and Fixing of PVC insulated, Armoured, heavy duty electric cable of copper conductor Solid/multistrand, 1100 volts grade ,cross-sectional area 6.0 sq. mm, 4 core. and cable to be laid in under ground for street light pole and also to be terminated at both end by using suitable size copper lugs,brass gland etc. Make: Polycab, Gloster, Finolex, Havells, BCH or substantial equivalent |
| 76 | Supply and Fixing of PVC insulated, Armoured, heavy duty electric cable of copper conductor Solid/multistrand, 1100 volts grade ,cross-sectional area 2.5 sq. mm, 4 core. and cable to be laid in under ground for street light pole and also to be terminated at both end by using suitable size copper lugs,brass gland etc. Make: Polycab, Gloster, Finolex, Havells, BCH or substantial equivalent. |
| 77 | Supply and Fixing of PVC insulated, Armoured, heavy duty electric cable of copper conductor Solid/multistrand, 1100 volts grade ,cross-sectional area 1.5 sq. mm, 4 core. and cable to be laid in under ground for garden/secirity lighting and also to be terminated at both end by using suitable size copper lugs,brass gland etc. Make: Polycab, Gloster, Finolex, Havells, BCH or substantial equivalent. |
| 78 | Supply and Fixing of Cable with copper conductor PVC round sheathed (flexible) industrial cable of 3 core, 1.5 sqmm with PVC/HDPE Flexible/Rigid protection pipes as per site requirement and as directed by WIC & EIC. Make: Polycab, Gloster, Finolex, Havells, BCH or substantial equivalent. |
| 79 | M&L for Pipe Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4.0 mm diaby means of galvanised iron including all required accessories like- nuts, bolts and washer, adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the electrode, PCC chamber and reinforced PCC, 20 mm bore GI pipe with funnel medium grade for watering and 20 mm dia GI pipe light grade for protection of earth lead from earth pit to the building/test point up to 7.5 mtr. |
| 80 | S & L of 4 mm dia galvanised iron or steel wire/strip as earth continuity conductor (ECC) or main earthing lead from earth pits to TPN DB, street light & security light poles and drawn in conduit/pipe and fixing as directed by WIC and EIC. |
| 81 | Demolition of Cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) |
| 82 | Cement concrete return filling type C2 1:3:6 (40mm graded aggregate). |
| 83 | Rough excavation of hard/dense soil not exceeding 1.5 m deep and getting out for cable laying and pole foundation. |
| 84 | Returning, filling in, including spreading, levelling, watering and well ramming in layers. |
| 85 | S & Filling of Ganga Sand under floors or in foundations or in excaveted cable trench including watering and consolidation as directed by WIC and EIC. |
| 86 | Brickwork laid dry with sub- class ‘B’ bricks straight or curved on plan exc 6 m meanradius for protection of U/G Cable. |
| 87 | Material and labour for cement concrete in foundations, filling and mass concrete Type B2 1:2:4 (40 mm gradedaggregate) incl form work. |
