Tender For Construction Of A Bathroom And Various Other Necessary Repair Works In House No. 14 At Kalidas Marg - Earth work in Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan lncluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil)( DAR.No-2.1.1, 2 Providing and laying in Position Cement Concrete of l 1:5:10 (1 cement, 5 Coarse sand (Zone-lll) Derived from natural Sources : 10 graded Stone aggregate 40 mm nomical size Derived from natural Sources ) DAR N0-4.1.10 3 Brick work with Common burnt clay F.P.S.(Non Modular ) bricks of Class- designation 7.5 in foundation and plinth in 1:4 Cement and Coarse sand of Mortar in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.1.1, 4 Provoding and Laying Damp Proof Course 40 mm thickwith Cement concrete 1:2:4, ( 1 Cement, 2 Coarse Sand (Zone-lll) Derived from natural Sources : 4 graded Stone aggregate 12.5 mm nomical size Derived from natural Sources ) DAR N0-4.10, 5 Brick work with Common burnt clay F.P.S. (Non Modular ) bricks of Class designation 7.5 in Superstructure above plinth level up to floor V level in all shapes and size in Cement Mortar 1:4 Cement and Coarse sand in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.4.1, 6 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DAR-5.3, 7 Steel reinforcement for R.C.C. workincluding Straightening, Cutting, Bending, Placing in position and binding all Complete upto Plinth Level. Themo-Mechanicaily Trated Bars of grade Fe-500D or more.DAR-5.22C.1, 8 Dismantling Old Plaster or SkirtingRacking out joint and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metars lead. DAR No-15.56, 9 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 Coarse sand). DAR-13.4.1, 10 Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2, 11 Providing CorrugatedG.S. Sheet roofing including Vertical/Curved Surface Fixed with polymer Coated J or L hooks, bolts and nuts 8 mm dia meter with bitumen and G.I. limpet washers filled with white Lead, including a Coat of approved Steel Primer and Two coats of approved Paint on Overlapping of Sheets Complete (UP to any Pitch in horizontal /Vertical or Curved Surface), excluding the Cost of Purlins, rafters andand trusses and including cutting to size and shape wherever required. (1.00 mm thick with Zinc Coating not less than 275 gm/m²) DAR N0-12.1.1, 12 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. DAR-12.52.4, 13 Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.40) 14 Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DAR-8.31), 15 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm metre. DAR- 26.86.1, 16 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick sqm, DSR-26.87.1 17 Supply and fixing of Stenless Steel Door And Window Fittings as Sliding Bolt, Tower Bolt, Handels etc. Complete as Direction of i/c 18 Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaguar Make. Code N0-FLR-5053N, including supply of all material & labour and T & P etc. requird for proper completion of work. 19 Providing and Fixing of 15mm dia Florentine C.P. brass Bib Cock, (Straight line model) with wall Flange Jaguar Make Code N0-FLR-5047N, including supply of all material, labour, T&P etc. complete. 20 Supply and Fixing of 15mm dia Florentine C.P. brass Two way bib cock with Wall Flange Jaguar Make Code N0-FLR-5041N, including supply of all material, labour, T&P etc. complete. 21 Supply and Fixing of C.P. Brass Single Lever Basin Mixer withoutPopUp Waste system with 450 mm long braided hoses, Jaquar Make Code N0-ALI-85011B, including supply of all material, labour T&P etc. complete. 22 Supply and Fixing of Florentine C.P. Brass Wall Mixter 3-in-1, System with Provision for both hand shower and overhead shower Complete with 115 mm long Bend Pipe, Connecting Legs & Flange (without Hand & Overhead Shower), Jaguar Make Code N0-FLR-5281N, including supply of all material, labour T&P etc. complete. 23 Supply and fixing of CPhand Shower Ø95mm round shape single flow (ABS body in chrome Plated with Grey Face Plate) with rubit cleaning sysyem of Jaquar make (Code No- HSH -1737) with Flaxible Tube 8 mm dia & 1.5m long with nuts Code no-SHA-549D8 including supply of all material & Labour and T&P etc complete. 24 S/F of Maze Over head Shower Ø300 mm RoundShape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System with Shower Arm Ø20 mm & 600 mm long Round Shape with 90° Bend for wall mounted showers with stainless Steel Flange Jaguar make, Code No-OHS-CHR-1633+SHA-479L600lncluding supply of all material & labour and T & P etc. requird for proper completion of work. 25 S/F 15mm dia C.P. health faucet with 8mm dia 1.20 Metre meter long flexible tube & wall hook, Jaquar make Code N0-ALD-573, including supply of all material, labour, T&P etc. complete. 26 Providing and fixing of Single Piece WC with UF Soft Close Slim Seat Cover Hinges, Dual Flush Cistern Fittings And Fixing Accessories and Aceessories set Size-370x670x720 mm. S Trap 300 mm Code N0-LYS-WHT-38851S300UFSMNM, Jaquar make, including Cutting and making good the walls and floors wherever required: 27 Supply and fixing of Aria Wall Hung Basin With Pedestal, Size 570X470x190 mm ARS-WHT-39801+ARS-WHT-39301, Jaquar makewith C.P. jali, PVC waste pipe, Bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work. 28 S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AQN-7731N, including supply of all material, labour, T&P etc. complete. 29 S/F of C.P. brass toilet Roll/Papar Holder with Flap Jaguar make Code N0-AKP-39753PS, including supply of all material, labour, T&P etc. complete. 30 S/F of C.P. Brass Single Towel Rack 600 mm with long hungers Jaguar make Code N0-AKP-35781PS, including supply of all material & labour and T & P etc. requird for proper completion of work. 31 S/F of C.P. brass towel ring Square Jaguar make Code N0-AKP-35721P, including supply of all material & labour and T & P etc. requird for proper completion of work. 32 S/F of C.P. trumbler holder Jaguar Make Code N0-AKP-35741P, including supply of all material & labour and T & P etc. requird for proper completion of work. 33 Supply and Fixing of Glass Shelf 600 mm long Jaquar make Code N0-AKP-35771P, including supply of all material, labour, T&P etc. Complete. 34 Supply and Fixing of Corner Glass Shelf (With Bracket) Jaguar make Code N0-ACN-1173, including supply of all material, labour, T&P etc. Complete. 35 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). 36 Supply and Fixing of S.S. Jali 125 mm dia, 37 Supply and Fixing of PVCNahani Trep, 38 Providing and placing on terrace ( at all floor levels ) Polyethylene Water Storage Tank. IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank. DSR- 18.48) 39 Providing and fixing gun metal gate valve with C.I heel of approved quality (screwed end) 20 mm dia nominal bore, (As DSR-18.17.1A) 40 Providing and fixing Ball valve brass of approved quality high or low pressure with plastic floats complet 20 mm nominal boreDSR- 18.18.2) 41 Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe )18.8.2, 42 Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal outer dia pipe )18.8.3, 43 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter DSR No- 12.41.1, 44 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm Coupler DSR No-12.42.1.1, 45 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 87.5°Bend 75 mm Bend DSR No-12.42.5.1, 46 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 75 mm, DSR- 12.43.1, 47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter DSR No- 12.41.2, 48 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm Coupler DSR No-12.42.1.2, 49 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 87.5°Bend 75 mm Bend DSR No-12.42.5.2, 50 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm, DSR- 12.43.2, 51 Removing White or Colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete.DSR-13.88, Rs-15.60 52 Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), Rs-123.27 53 Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade Old work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (DSR-13.112.1), Rs-103.72 54 Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coatson new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR.N0-13.62.1), Rs-178.72 55 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DAR No-15.60,
