Tender For Sinking Of Sub submersible And Water Atm Machine Khankar Bazar More Gp-Magrahat West Under Magrahat- Ii Ps - 1 SINKING OF SUBMARSHAL & WATER ATM 2 Water Purification PlantEarth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. .(a) Depth of excavation not exceeding 1,500 mm. 3 (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete 4 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation 5 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 6 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.(a) Pakur Variety 7 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. i) Pakur Variety 8 Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth 9 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 10 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction(a) For works in foundation and upto roof of ground floor/upto 4 m(SRMB/ELEGANT STEEL/CAPTAIN/BALAJI SHAKTI/HEXA/ADHUNIK/SUPER SHAKTI/RASHMI TMT/SEL/SEL TIGER) 11 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 12 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar (b) 20 mm thick plaster 13 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar (c) 15 mm thick plaster 14 (ii)(c)10 mm thick plaster (1:4) 15 a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor (ii) Grill weighing upto 16 Kg./sq.mtr 16 a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 17 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly,complete as per manufacturers specification and as per direction of the EIC.In Ground Floor:(b) Two Coats 18 A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface : ii) Two coats (white in shade) 19 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. 20 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. (In Ground Floor)(b) Two Coatsii) Solvent based interior grade Acrylic Primer 21 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)a) Normal Acrylic Emulsion 22 Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(c) 1000 litre capacity 23 Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 24 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(v) 40 mm dia 25 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.(A) For Exposed Work(ii) 25 mm dia. medium quality 26 (A) For Exposed Work(ii) 32 mm dia. medium quality 27 (A) For Exposed Work(ii) 40 mm dia. medium quality 28 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, ………..Valamoid/Bitumen/M-Seal etc) completeA) UPVC Pipes:(i) 75 mm. Dia. 29 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with .........thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile above0.09 Sq.m(i) Coloured decorative 30 40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water …………... seperately) for underground water retaining structures. 31 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set .............by the contrr]e) I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(A) Deep Colour & White 32 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP ............... specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)(b) 3 mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) 33 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface.Two Coats 34 Labour for boring tube well of required dia. by water jet system through any type of soil strata …………..n the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. 35 For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100mm dia. 100 mm dia. boring 36 50 mm dia. boring etc. 37 For depth more than 150 metre(I) 50 mm dia. boring etc. 38 Supplying , fitting and fixing steel cutter piece up to 450 mm long with sockets(ii) 50 mm dia 39 Supplying , fitting and fixing High density polythene strainer (ii) 50 mm dia 40 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(b) 100 mm dia 41 (a) 50mm dia 42 Supplying , fitting and fixing Reducing Socket 43 Supplying, fitting and fixing Plug 44 Supplying, fitting and fixing Submersible pump complete with electrical cable line etc. complete set. 45 Washing and developing tube well with air compressor pump and engine for 8 (eight) ………. gallons per hour with V notch including hire and labour charges for all tools and plants and scaffolding as required. 46 Collecting sample of water for baeteriological, chemical and arsenic test from any depthy at ……….d sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. 47 Supplying, fitting & fixning Name Plate 48 ELECTRICALWORK 49 Supplying and fixing MCB SS enclosure with IP-20/30 …………...attachment. 2 way. 50 Supplying and fixing 240/415 V MCB of Breaking…………. and necessary connection. 16A SP 51 Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed …………….. making earthing attachment, painting the MS box andmending good the damages to original finish 52 Distribution wiring in 1.1 KV single core stranded FR ……….. (Precision make) incl. necy. fittings as required 53 i)2 x6 sqmm + 1 x4 sqmm ECC 54 ii) 2 X 2.5 sqmm & 1 X 1.5 sqmm 55 Supply & Fixing 240 V, 20A, plug socket with separate 20 A …………………..r and making necessary connections as required 56 Supplying& Fixing of 9w LED Lamp with Jambo Holder. 57 Supply, Fitting and Installation of Digital RO Water ATM, Capacity 250 LPH Coin operated water Vending Machine double dispencing (Normal and Cold) Size L-3 ft, W-5 ft & H- 9 ft. including all necessary accessories. 58 ADD 18% GST 59 Add 1.00% Labour welfare cess
