Making Arrangement For Celebration Of Independence Day 2025 At Red Fort, Delhi. (Sh: Providing Earthing For Signal Equipments, Lighting Arrester, Buffering, Polishing And Allied Electrical Works.)--Correction = Nil, Insertion = Nil, Overwriting = Nil, Deletion = Nil, 1 Providing service of staff for routine & preventive checking / maintenance of electrical installations like DBs fans, fittings, feeder pillar and all other equipments & accessories installed at rampart, PM safe room and outside area of Red Fort (MOD office, civil office & other offices of various agencies) shift decided by engineer-in-charge on all days of the month i/c Sunday or holiday etc complete as required. a)Wireman-04Nos. b) Khallasi - 04 Nos. 2 Buffing, polishing & cleaning of lift with nickel & brasso to remove all dirt particals to give a new look to lift finish etc complete as required as per directions of engineer-in-charge. 3 Supplying & fixing of 400 mm dia sweep wall mounted fan complete with all standard accessories with 3 speed regulator, oscillating type suitable for operated on 230Volt 50Hz single phase AC supply i/c connection & testing etc complete as required. 4 Supplying & installation of 250 mm sweep fresh air fan suitable for operation on 230Volt 50Hz single phase AC supply in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc as required. 5 Location of H.T/LT Fault in the existing laid power cable of 11KV grade with the help of L.T./ H.T. Kit and pin point instruments with one meter distance of actual fault location upto cable depth 1.50 meter, including digging out hard soil/rock with the help of J.C.B. refilling after repairing the same etc. as reqd. 6 Fabrication, supplying, installation, testing & commissioning of front openable hinged type door cover made out of 2 mm thick CRCA sheet steel including providing & fixing of flush type consealed lock / pad locking arrangement, painting with powder coated painted on the existing cubical type feeder pillar / panel board / window cover of poles etc. as required. 7 Fabrication supplying, installation, testing and commissioning of compartmentalized type feeder pillar with water proof canopy front and rear double door lockable type suitable size not less then 450mm deep made out of 2mm thick CRCA sheet having 400 Amp 4 strip aluminium bus bar netural link, provision of incoming & outgoing MCCB, earth bar seprate hinged type door, volt meter, ampere meter, LED indication light i/c angle iron stand complete as per approved drawings i/c connections interconnections with suitable size Al conductor cable painting earthing i/c the body along with C.C foundation i/c grounting the same in C.C foundation etc. as reqd. Correction = Nil, Insertion = Nil, Overwriting = Nil, Deletion = Nil, Sr. 8 Pole painting GI pipe pole/ steel tubular swaged type/ secutiry light (approximately upto 9 mtrs height of varying dia. approx. 100/80/65 mm dia.), MS/ GI pole i/c bracket/ channel/ cross arms, if any, and complete removing the existing paint and rust from the surface of pole with the help of Ragmal paper and cleaning the pole with suitable acid, applying one coat of red oxide primer on complete surface of pole/ angle iron/ bracket/ cross arm, and finally painting the pole/ angle iron/ bracket/ cross arm with two or more coat of superior quality approved Aluminium paint / synthetic enamel paint to give an even shade and pole numbering etc. as required, without damaging the street light and keeping street light free from any kind of paint/ primer spot etc.complete as reqd. 50 9 Supplying & laying of following sizes XLPE insulated & PVC sheathed aluminium conductor armoured power cable suitable for rated voltage 1.1 KV grade as amended upto date (ISI marked) in the existing HDPE / GI pipe etc complete as required. a) 2 x 10 Sq mm 300 b) 4 x 16 Sq mm 100 c) 3½ x 70 Sq mm 100 d) 3½ x 120 Sq mm 150 e) 3½ x 240 Sq mm 80 10 Supplying, installation, testing and commissioning of 10- 12Watt, energy saving, surface mounted, bulk head (IP 65) complete with polycarbonate body and PMMA diffuser and electronic driver etc. suitable for operated on 230Volt., 50Hz., single phase AC supply on the existing wall surface or ceiling i/c connections with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc complete as required. 10 11 Providing and fixing of Gel-Chemical Earthing Electrode of copper made as K-Type copper tube as per following specification : Length - (2100 mm) Copper pipe - 50mm dia Wall Thickness - (1.6 mm) Dia-Terminal Strip Hole - (10 mm) , Copper strip -30x 5 mm And earth enhancing compound should be used to treat the soil for lowering the effective ground impedance 50 Kg for each earth pit to make it maintenance free and to minimize the ground voltage potential rise etc. as required 2 12 Supplying and drawing of 1 X 10 sq mm FRLS PVC insulated copper conductor, single core flexible cable in the existing wall surface between earth electrode to prog of lightning arrestor etc complete as required. 150 13 Supplying and drawing of 3 core X 2.5 sq mm round sheathed copper conductor, flexible cable in the existing wall surface / loose for temporary extension board connection at different locations required by various agencies etc complete as required. 100 14 Supplying, installation, testing and commissioning of energy efficient asthetically designed LED post top luminarie made with high pressure die cast aluminium housing with 02Nos. die cast aluminium arms are provided to support the 5