Necessary Repairing Work Of Officers Toilet At 2Nd Floor And Main Door Of Officers Chamber At Taratala Ps,63, Taratala Rd, Kolkata-700088, During The Year 2025-26.-2 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including round off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagingwhere necessary (Ground floor).[Excluding cost of chipping over concrete surface] iii) with 1:6 cement mortar. (b) 20mm thk plaster 3 Rendering the surface of the wall and ceiling with white cement base WATER PROOF wall putty of approved make & brand ( 1.5 mm thick) 4 (b) Priming one coat on timber or plasteredsurface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 5 Acrylic Distemperto interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface. Two Coats 6 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.(a) On timber or plastered surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) 7 Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finishedweight of 2.73 kg/mtr.) of size l00mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door ’ frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. Anadditional 5mm thick PVC sheet with desired colour/shadeto be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert.........(a) Plain colour 8 PVC Door Shutter-37 mm thick:Supplyingfitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail ofthe P.V.C. door shutter willbe made ofrigid P.V.C. multicavity hollow chamber of suitable size and section screws and 2 nos. of solid plastic or M.S. tubular galvanised........... 9 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(d) Sal: Local 10 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in posting but excluding the cost of hinge and other fitting. In ground floor.(i) 50mm thick shutters wih 25mm thick panel of size 30to 45 cm.(b) Ordinary teak wood. 11 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm x 600 mm x 10 mm thick) in floor, skirting etc.(A) Deep Colour & White. 12 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) WallWith Sand Cement Mortar (1:3)15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(b) Area of each tile above 0.09 Sq.m (i) Coloured decorative 13 Supplying,fitting and fixing(a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 14 Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.(a) With P trap (with vent) 15 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (b) Anglo Indian (ii)Plastic (hallow type) white 16 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 17 Supplying, fitting and fixing (d) Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar 18 Supplying, fitting and fixing(a) (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) 19 Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long 20 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 21 Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm 22 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 23 Distribution wiring in 1.1KV grade 2x22/0.3(1.5sqmm) single core stranded FRPVC insulated & unsheathed copper wire…(b)Average run 6mtr 24 Distribution Wiring in 1.1KV grade 2x22/0.3(1.5sqmm ) single core stranded FR PVC insulated & unsheathed copper wire….(a) on board 25 S&F of 1x1200 mm LED tube(Make:- (Philips-Mas LED tube 1200mm 18W865 T8 |-2100Im/ Similar Crompton/Similar Havels ) including necessary fittings, Switch & wiring. 26 Removal of rubbish, each etc, from the working site and disposal of the same beyond the compound, in conformity with the Municipal/ Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. 27 Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer-in-Charge. 28 Sub Total 29 GST 18% 30 LWC 1%
