Tender For Road Signage Work Pahasu Ahmadgarh Road Odr In District Bulandshahar From Ch 0 000 To 8 300 - Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2, khurja-Uttar Pradesh

Road Signage Work Pahasu Ahmadgarh Road Odr In District Bulandshahar From Ch 0 000 To 8 300 - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes..but Including cost of, all material,bitumen labour, T&P,royality , all taxes and labour cess complete. 22.2 MORTH-803(8.13) excluding GST 2 Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical post of 6.00 M heigh made up 300 mm NBheavy class MS pipe as verticle member welded with 10 mm MS plate at Top % 12 mm MS plate at Bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M.S. pipe bracing % 10 mm diaM.S. plate at bottom for fixingto vertical post as per structure design& drawing with one of steel primer and two coat of synthetic enamle paint. The work includes construction of RCC foundation of size 90 x 90 M of required depth as per site condition for built up structure including eart work in excavation 100 mm thick Lean Concrete in 1:4:8 cement, coarse sand & 40 mm gauge stone ballast. R.C.C. with in 1:2:4cement, coarse sand & 20 mm gauge stonegrit including supply and fixing of 25 mm dia foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering.The lateral vertical clearances and complete. Instalation work shall be as per relevant clause of MORT & H specification section 800 and IRC: 672010 compete in all respect.excluding GST 3 Retro Reflective Signboard made up to 2 mm thick alluminium sheet, face to be fully covered with 3 M high intensity prismetic reflective sheeting series 3930, letters/ symbols shall be made of sami retro reflective sheeting and computer cut as per colour required, boards are to be supplied along with back support frame of MS angle size 35x35x5mm , and back side of alluminium sheet shall be painted with stove enamel paint with seven years warranty . Rates include desin , fabrication , supply ,transportation and erection of the sign board . excluding GST 4 Providing and fixing of 30 cm X90 cm Rectangular Hazard Marker retro-reflectorisedsign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60 excluding GST 5 Providing, Fixing, Paintion & Lattering 5 th Km. Stone all labour, material and T&P required for proper completion work including all taxes but excluding GST 6 Providing, Fixing, Paintion & Lattering 1 Km. Stoneall labour, material and T&P required for proper completion work including all taxes but excluding GST 7 Providing, Fixing, Paintion & Lattering 33Km. Hectometer Stone all labour, material and T&P required for proper completion work including all taxes but excluding GST

INR 950 /-

INR 164000.0 /-

INR 16.40 Lakhs /-