Supply Of Network Material At Ukai Tps.(Et-5992 It), Tapi-Gujarat

Supply Of Network Material At Ukai Tps.(Et-5992 It); 1 24 PORT 10/100/1000 BASE-T, + 4 SFP COMBO MANAGED SWITCH 20 Number 2 100/1000M SINGLE MODE SFP MODULE FOR FIBER SWITCH 40 Numbers 3 SC-LC SM DUPLEX FIBER PATCH CORDS (2 MTR) 20 Number 4 06 CORE OUTDOOR ARMOURED SINGLE MODE FIBER CABLE FOR COMPUTER LAN CONNECTION. 5000 Meter Make: Quantum, CISCO, Allied Telesis, Techroutes, HP Model: 1 Switch should offer Wire-Speed Non-Blocking Switching & Routing Performance at Layer 2 & Layer 3. 2 Switch should have Twenty Four (24) 1GbE RJ45 ports and Four (4) 10GbE SFP+ Slots 3 Access Switch should support Stacking up to 8 Switches with more than 40 Gbpsstacking bandwidth per Switch. 4 Switching Bandwidth: Should provide Non-Blocking switch fabric capacity of 128 Gbps or more. 5 Forwarding Capacity: Should provide wire-speed packet forwarding of 96 Mpps or more. 6 Switch should support 4K Active VLANs 7 Switch should support IP subnet based VLANs 8 Switch should support Auto Voice VLANs 9 Switch should support 16K MAC addresses or more. 10 Switch should support IP multicast snooping with support for IGMP v1, v2, v3 with immediate leave and MLD v1 & v2 11 Switch should support Jumbo Frames (up to 9K bytes) 12 Switch Should support MAC based VLANs, Port based VLANs 13 Switch should support dot1x Guest VLAN 14 Switch should support bridge multicast filtering for IPv4 & IPv6 15 Switch should support GVRP from day one 16 Switch should support minimum 300 Routes or more 17 Switch should support Basic IPv4 and IPv6 Static Routing; Policy based Routing, ECMP, Host Routes, Virtual Interfaces, Routed Interfaces, Route Only and Routing between directly connected subnets from Day 1. 18 Switch should support Storm control (Broadcast, Multicast, Unicast) 19 Switch should support LLDP/LLDP MED 20 Switch should support ISATAP from day one 21 Switch should support IPv4 & IPv6 Routing protocols (OSPFv2, OSPFv3 & RIPv2) and Layer 3 Multicast Routing Protocols from Day 1. 22 Switch should support RADIUS, username/password for Authentication, Authorization and Accounting (AAA) with Local User Accounts and Local User Passwords. 23 Switch should support secure communications to the management interface and system through SSL, Secure Copy and SNMPv3 24 Switch should support IP Source Guard, DHCP snooping, DHCPv4 server, DHCPv6 and Dynamic ARP Inspection. 25 Switch should support Auto-Update and Auto-Configuration for Image. 26 Switch should support IPv4 and IPv6 ACLs with up to 2k ACL and a minimum of 2K rules per system (Standalone Switch or Stack). 27 Switch should support Byte and packet based broadcast, multicast, and unknown-unicast limits with suppression port dampening. 28 Switch should support VRRP 29 Switch should support UDLD. 30 Switch Should support Priority queue, WRR support, SP, Traffic shaping, 802.1p 31 Switch should support Denial of Service (DoS) that provides Martian address check, Limiting SYN attacks, Protects from Stacheldraht Distribution DoS attack, Invasor Trojan & Back Orifice Trojan 32 Switch should support IPv6 Router Advertisement (RA) Guard. 33 Switch should support Flexible Authentication with 802.1x Authentication and MAC Authentication. 34 Switch should support multicast TV VLAN from day one 35 Switch should support manageability using Controller from the same OEM. Controller to be quoted along with the switches. 36 Switch should provide Integrated Standard based Command Line Interface (CLI), Telnet, TFTP, HTTP access to switch management/monitoring 37 Switch should support NetFlow or sFlow or equivalent 38 Mounting Option: 19” Universal rack mount ears 39 All categories of Switches & Switch OS should be from same OEM 40 Warranty: Switch should be quoted with TAC Support and Warranty for Three years with NBD Hardware Replacement. Make: Quantum, CISCO, Allied Telesis, Techroutes, HP Model: 1 Form Factor should be SFP 2 Fiber Mode / SFP Mode Should be Multi-mode 3 Transceiver Type - SX 4 Support Protocol IEEE802.3z (1G) 5 Should have Wavelength (nm) 850 5 | P a g e 6 Connector Type Should be LC 7 Maximum Data Rate should be 1000 (mbps) 8 Should support Maximum Cable Distance 550 (meters) 9 Should Support Digital Optical Monitoring (DOM) 10 Operating Temperature Range Should be O-70 Degrees C 11 All Switches & Transceivers should be from same OEM. 12 Warranty: should be quoted with TAC Support and Warranty for Three years with Hardware Replacement. SC-LC SM DUPLEX FIBER PATCH CORDS (2 MTR) 06 CORE OUTDOOR ARMOURED SINGLE MODE FIBER CABLE

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	10-06-2025			25-06-2025
2	25-06-2025			05-07-2025

Refer document

INR 17.29 Lakhs /-