|
| 1 | Item No.1 :Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line,level and slope including necessary collars, excavation, laying, fixing with collars incement mortar 1:1 and refilling the trench complete. |
| 2 | Item No.2:- Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channelshalf round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete |
| 3 | Item No.3 :- Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking rubble obtained by blasting.(Hand broken). |
| 4 | Item No.4 :- Supplying soft murum at the road site, including conveying and stacking complete |
| 5 | Item No.5 :-Spreading 80/40 mm metal for road work including sectionong etc complete as directedby Engineer in charge . |
| 6 | Item No.6 :-Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 7 | Item No.7 :-Compacting the sub grade/ gravel/ oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials andartificial watering complete |
| 8 | Item No.8 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) |
| 9 | Item No.9 :-Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in jointswith bitumen etc. complete. (with fully automatic micro processor based PLC withSCADA enabled concrete batch mix plant / pan mixer with fine agreegates of requiredspecifications ( VSI sand finely washed etc ) |
| 10 | Item No.10.:-Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 11 | Total in Figures |
| 12 | Item No.11:- Charges for testing of Material in vigilance & quality control laboratory For concrete compressive strength of C.C. cube (sets of 3 cubes) |
| 13 | Item No.12:- Charges for testing of Material in vigilance & quality control laboratory For Metal Sieve Analysis |
| 14 | Item No.8:- Charges for testing for all other minerals except sand = Roaylty + surcharge (2%) + Disst. Mineral foundation cess (10%) |
| 15 | Total in Figures |
