Tender For Facad Linghting Work At Thaiwat Temple(Buddha Statue) In District-Varanasi.( - Civil work) 3 Supply, Installation, Testing & Commissioning of 495mm Length X 200 mm Width X 330mm Height Rectangular Flood light with Non-integral driver & completely made in India luminaire. Luminaire must use Single LED of RGBW Chip and not descrete individual LEDs of each colour for colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 192W and shall deliver 8640 lumens. Beam angle of the Luminaire shall be narrow , mediumand wide as per site requirement .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire shall be compatible with DMX controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architect in charge.Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. Similar Wipro make - LF28-212-XX-CCW-G2 or Equivalent Regent /Trilux Ligman/Osram or equivalent 4 Supply, Installation, Testing & Commissioning of 1000 mm length X 39mm Width X 65.5mm Height RGBW Linear Wall Washer with Non-integral driver & completely made in India luminaire. Luminaire must use Double LED Array of RGBW ChIPDouble Array and not descrete individual LEDs of each colour for colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 & IK07 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 48W and shall deliver 1920 lumens. Beam angle of the Luminaire shall benarrow, medium, wide and Assym as per site requirement. Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire shall be compatible with DMX controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architect in charge. Luminare, Driver and controller should be with same make. Similar Wipro make - LF01-481-XX-CCWG2 or Equivalent Regent / Trilux/Ligman/Osram or equivalent 5 Supply, Installation, Test & Commissioning of 11W LED Decorative Bollard with System efficacy of 770 lumens). Luminaire shall be made up of dark grey, pure polyester power coated extruded Aluminium housing with seamless milky white polycarbonate diffuser of length 110mm±2mm, having dimension of dia(Ø) 67.5m± 2mm with height of 800mm±2mm. All external hardware must be of SS304 grade. LM 80-08 compliant LEDs of EMC/ceramic package from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP65 and IK10 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing).The LEDs used should be with CCT of 3000 K, CRI of Minimum 80 and SDCM <5.LEDs must be driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickness of 35 microns to be used for LED mounting. IP66 rated LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-280V AC. Driver Efficiency > 80% & 3 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 should be there.(make Similar to Wipro /Regent /Trilux/Ligman/Osram or equivalent) 6 Supply, Installation, Testing & Commissioning of 250mm Dia X 90 mm Height 3000K LED Inground light with Non- Integral driver & completely made in India luminaire. The luminaire’s shall be made of Aluminum die cast housing duly Powder coated. The complete luminaire has IP67 & IK10 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage24W and shall deliver 1200 lumens. Beam angle of the Luminaire shall be 60 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architect in charge. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. Similar Wipro make -LI20-222-30-30-G2 Or Equivalent Regent / trilux 7 Supply, installation, testing and Commissioning of 5Core 5C DMX cable/Patch cord Patch Endcape 1mC-5C-S-IP67 8 Supply, installation, testing and Commissioning of 5Core 5C DMX cable/Patch cord Patch Endcap 1m 9 Supply of Isolated, constant Voltage type240 W LED Driver enclosurein Extruded Aluminium metal enclosure . Driver shall be made in India compatible for Mono luminaires with silicone potted and IP 66 Protected of same make as luminaire. Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 150V to 270V (nominal rated voltage – 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal Shutdown protection. 10 Supply, Installation, Testing and commissioning of DMX Splitter, Booster 343 mmHeight X 123mm Width X 46 mm Depth with completely made in India product .Input Power DC 12-24V input, 100-240V, 24VDC plug-in power adaptor included Power Consumption 4.5W max and of MS/ Aluminium Housing. Power Consumption of 4.5 Approx and Weight of 1.5Kg .The output terminals should be optically isolated from the input and share a common ground reference. All six output ports should have an independent output driver and ELV transformer to boost the DMX signal. 1: 6 Way DMX Splitter/Booster ,Optically isolated DMX Input/Outputs, Individual coil transformer for each output , Surface/Rack/Floor/Celling mountable with provide mounting accessories ,Refined and filtered data , Cable 3 core 0.75sq.mm .Five Year Warrantyof DMX Signal Splitter+Amplifier - One DMX512 signal Input to six DMX512 outputs, Designed to amplify, distribute and isolate DMX signals in short-runs and localised splitting scenarios. Photo-electric isolation between Input and Output terminals as well as between output terminals among channels. Compensates for any intereference from external sources like AC lines, Electrical equipment operating close to DMX transmission lines.Compact DIN rail enclosure enables easy installation inside most enclosures. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architect in charge.(make Similar to Wipro /Regent /Trilux/Ligman/Osram or equivalent) 11 Supply, Installation, Testing and commissioning of DMX Master Controller, with completely made in India product. A stand alone interface for installation in electrical DIN Cabinets with Din rails, which can control from 512 to 1024 and can go up to 2048 channels on 1, 2 or 4 DMX universes. A robust Stand Alone mode and a wide range of trigger possibilities (RS232, Contacts, Clock, NODE x4 ports, Master/slave), USB-C Networks Ethernet, Internet, WIFI compatible when connected to a router Multiple Zone 10 Zone, play 10 scene/sequence per time in Stand Alone ,Memory of Micro SD Card ( max. 256 GB ) and 8Mb Internal memory . Art-Net and sACN from SD card, including triggers (2x512). A master / Save Synchro (32 max wired / 128 max Ethernet) that Commands from the Contacts (speed, scene, dimmer, zone). Default start scene, Scene priority, Cross Fade time between scenes , Automatic Scene Recovery if the power is cut off and 16-bit and fine channel management. Triggers options of RS232 In/Out (16 characters max for RS232 triggers, commands or orders) and UDP / Ethernet triggers and commands (from SDK). Software Requirements with System Compatibility of Windows, Mac, iOS. Flexible, adaptable mounting options ,Should be provided with light show authoring software, Direct line voltage power supports 100—240VAC,Minimum five configurable effects, Using light show authoring software to select from standard five effects, adjust effect settings such as color, speed, and brightness. IP20. Addressing & Programming inclusive and with Five Year Warranty. (make Similar to Wipro /Regent /Trilux/Ligman/Osram or equivalent) 12 Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:-a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.(b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.c) Data Monitoring System complete with accessories.d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 13 GST Extra as applicable
