|
| 1 | Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm (twenty millimeter ) thick pre-mix carpet and seal coat type B as per technical specificationClause 1904.2 as per the direction and entire satisfaction of Engineer-In Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 2 | Earth work in excavationfor alltype ofroad structure and in all type of classification of soilcomprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) for retaining walls, breast walls, culverts, bridges, drains and parapets etcetera as per drawings and M.O.R.D. technicalspecificationclause 305.1 and as per direction ofthe Engineer- In – Charge, includingsetting out, construction of shoring and bracing , removal of stumpsand other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavatedsuitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeters) compacted thicknessincluding shoring and strutting and pumping and bailingout water (surface and sub soil water)upto any depthand any quantum of water including cleaning of slush which may arrise out during dewateringas per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 3 | Providing andlaying hard stone Soilng properly hand packed intersects with kharanja staone and consolidating with power / handroller to requested graidient and camber including spreading watering and rolling of binding morrum or earth etc complete as per HPPWD specification 100 mm spread thickness finished work including materials and labouras per the direction of Engineer-in-Chargeincluding carriage of materialwithin all leads and lifts and other incidentals .The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 4 | Providing, laying, Concrete for plain reinforced concrete in open foundations complete as per drawings and technical specificationClause 802, 803 , 1202 and 1203 M-10 (ten ) grade 1:3:6 (one cement :three sand :six aggregate )20 mm (twenty millimeter nominal size ) .as per the direction and entire satisfaction of Engineer-In Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. . |
| 5 | Providing and laying mechanically mixed and vibrated plain cement concrete in foundation and plinth, as per drawing and Morth technical specification section 800, 900 &1200 for nominal mix 1:5:10 (one cement : five sand : ten graded stone agg. 40mm (forty millimeter) nominal size) and curing complete as per direction of Engineer-in-Charge and as per the drawing and hauling carriage of labour, equipments and materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 6 | Providing back filling with granular material behind abutment wing wall and return wall complete as per drawing and technical specification clause 1204.3.8 granular material including entire carriage of materials within all leads and lifts and other incidentals. including entire carriage of materials within all leads and lifts and other incidentals.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 7 | Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extendingthrough the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technicalspecification clause 614, 709, 1204.3.7. including entire carriage of materials within all leads and lifts and other incidentals.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 8 | Providing and applying tack coat with Bitumen emulsion Bitchem using emulsion distributor at the rate of 0.275 (zero point two sevenfive kilogram ) per square meter on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.as per the direction and entire satisfaction of Engineer-In Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 9 | Providing and laying 25 mm (twenty five millimeter ) thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 ( Seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 (five point four to five point six )per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects as per the direction and entire satisfaction of Engineer-In Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 10 | Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five millimeter )thick including reflectorising glass beads @ 250 (two hundred fifty ) gms per square meter area, thickness of 2.5 mm (two point five millimeter )is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.as per the direction and entire satisfaction of Engineer-In Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
