Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-06-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-07-2025 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each and removing from site complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each and removing from site complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2Sqm each and removing from site complete all as specified and as directed. |
| 4 | S & F 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 5 | S & F35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with outsash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as perspecified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed. |
| 6 | S&Ffactory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 7 | S&Ffactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail, lock rail & bottom rail. Panelling of plain colourPVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 8 | S&F pressed steel door frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified as directed |
| 9 | S&F factory made 25 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free, water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including necessary Locking arrangement complete all as specified and as directed.Note-:(a)Colour/Texture Style of Door/Prelam Sheet shall be approved by GE.(b)Test certificate from original Manufactuer shall be submitted to Engr-In-Charge before incorporation in the work site. |
| 10 | S&F factory made 100% solid WPC (Wood polymer composite) Door frame 90mm X 45mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/borer proof, water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-charge.Note-:(a)Colour/Texture Style of Door/Prelam Sheet shall be approved by GE. (b)Test certificate from original Manufactuer shall be submitted to Engr-In-Charge before incorporation in the work site. |
| 11 | S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed/Glass and one shutter wire mesh)with following specification complete all as specified and as directed by Engineer-in-charge.(i) Windows frame of cross section 101mm x 44mm (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm (iii) Sliding shutter frame of cross section 40 x 18mm(iv) 4 mm thick glass superior quality. (Min)(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos. (Min)(vii) Sliding rollers per shutter - 02 Nos. (Min)(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.Note- (a)Thickness of Aluminium Section shall be minimum2 to 3mm (Final Thickness and Cross Section ofAluminium sectionof higher size without any extra cost shallbe approvedEngineer in Charge as per Site requirement (b) Drawing /size of window shallbe provided by Engineer in Charge during execution of work as per site requirement. |
| 12 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 13 | S & F powder coated aluminum door with the following specification and making good the adjacent surfaces, complete all as specified and as directed.(a) Cross section of chowkhat frame 101.60x44.45mm(b) Cross section of hanging and meeting style 83x44mm(c) Top rail of cross section 114x44mm(d) Bottom rail of cross section 114x44 mm(e) Locking rail (middle rail) of cross section 83x44 mm(f) 4 mm thick glass superior quality. (Min)(g) Aluminum handle eisc type -02 Nos per shutter (inside & out side).(h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside).(j) Concealed Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. Note- (a)Thickness of Aluminium Section shall be minimum2 to 3mm (Final Thickness and Cross Section ofAluminium sectionof higher size without any extra cost shallbe approvedEngineer in Charge as per Site requirement(b) Drawing /size of window shallbe provided by Engineer in Charge during execution of work as per site requirement. |
| 14 | S&F in repairs galvanised Stainless steel wire cloth of0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 15 | Hacking out old broken glass( any tickness size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed. |
| 16 | S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 17 | S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed. |
| 18 | S&F aluminum alloy handles fabricatedanodised of 150 mm long complete all as specified and directed. |
| 19 | S&F in repairs200 mm long Aluminiumalloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixingbolts and 16mm dia bolt sliding bolts of extrudedsection complete all as specified and as directed. |
| 20 | Taking down existing aluminium Door/window shutters of any size and carry out minor repairs with & including replacement of unserviceable top/bottom rail, hinges, rubber beading, etc and also carry out repalcement of broken wire mesh and glass panes wherever necessary (wire mesh and glass pane shall be measured and paid separatly) and refixing the shutter in the same opening complete all as specified and directed. |
| 21 | S&F coloured powder coated aluminium frame work for door, windows, ventilators, partishions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed. |
| 22 | S&F aluminium coloured powder coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed. |
| 23 | S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 24 | S&F in repair aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed. |
| 25 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 26 | S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etccomplete all as specified and directed. |
| 27 | S& F Plyboard hardwood 2nd class,clean sawn, plain,18mm thick, feather edged cut as required to cut to shape and fixed complete all as specified and directed |
| 28 | S&F 1mm thick sunmica coloured/design/texureof decorative laminated layer that is placed on top of wood/ply boards with adhessives as per manufactured instructions complete all as specified and as directed. |
| 29 | S&Ffactory made PVC shelf/partition of required size consisting of panel of 18 mmthick celuka PVC ply having prelaminated one side on itof density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as specified and directed .Note:Design,Size,Colour and Texture of PVC ply shallbe approvedby Engineer-in-Charge. |
| 30 | S&F in repair 25 mm dia of anodised aluminium alloy, chromium plateddrapperycurtain rod withfixing bracket complete all as specified and directed. |
| 31 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified andas directed. Note:Taking Down Plaster is to be carried out upto 15.00m height in Chhajja Bottom and Walls.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site. |
| 32 | M&L for rendering 15mm thick in CM 1:4 on External faces (Exposed to weather) ofbrick or concrete surface of wall with liquid water proofing compound @ 200 ml per bag andfinished even and smooth without using extra cement complete all as specified and as directed. Note:-(a) The Cost of Liquid water proofing compound included in the iteam and not to be paid separately(b) Rendering is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site. |
| 33 | M&L for rendering 10 mm thick in CM ( 1:6 ) on Internal faces ofbrick or concrete surface of wall andfinished even and smooth without using extra cement complete all as specified and as directed. |
| 34 | M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for applying two coats offirst quality oil emulsion distember over a coat of primer over acoat of Acrylic / Water proofing wall Putty on walls complete all as specified . Note:- Putty shall be measured and paid seperately. |
| 36 | M&L fornNew plastered surfaces of wall,pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of wall care acrylic putty and acrylic primer (X2) complete all as specified and directed.Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) or Make/Brand as specified in Particular Specification.Make of primer :- Asian (X2) or Make/Brand as specified in Particular Specification.Note :-(a) Each stage i.e preparation of surfaces, application of primer, application of first coat.application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer\"s instructions, whichever is more is required to be furnished by contractor for this item (c) Putty shall be measured and paid seperately. |
| 37 | M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks and applying two coat of 1st quality interior plastic emulsion paint white/coloured over white cement based putty (where it is required in patches) complete all as specified and directed by Engr-in-Charge.Note:- Putty shall be measured and paid seperately. |
| 38 | M&L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling by white cement base putty and applying one coat of Ist quality interior plastic imulsion paintwhite/coloured all as specified. |
| 39 | M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marksand applying one coat ofexterior weather proof water base emulsionpaint white/coloured over primer of same makewhite cement based putty (where it is required in patches) all as specified and directed. Note: (a) Putty shall be measured and paid seperately.(b) Make Asian- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) or Make/Brand as specified in Particular Specification. (d) Painting is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etcrequired at site. (e) The quoted rate shall be inclusive of all necessary scaffolding work, lifting arrangement and safety devices as required at site. |
| 40 | M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marksand applying and applying two coat ofAcrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make basewhite cement based putty (where it is required in patches) complete all as specified and directed.Make Asian- Apex or Make/Brand as specified in Particular Specification. Note:- (a) Putty shall be measured and paid seperately.(b) Painting is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etcrequired at site. (c) The quoted rate shall be inclusive of all necessary scaffolding work, lifting arrangement and safety devices as required at site. |
| 41 | M&L for three coats of white washing on newly/Old plastered or concrete celling sufaces incuding preparation of surfaces complete all as specified and directed. |
| 42 | M&L for removal of complete existing treatment of Internal/External wall and surface finished even and smooth with sand paper complete all as specified and directed.Note: Complete Removal is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender. The quoted rate shall be inclusive of all necessary scaffolding work, lifting arrangement and safety devices as required at site. |
| 43 | M&L for preparation of newly plastered surface of wall and and applying2mm thick Acrylic / water proofing wall putty in two coats(each coat not less than 1mm thick )and surface finished even and smooth with sand paper completeall as specified |
| 44 | M&L for finishing walls with textured paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed. |
| 45 | M&L forpreparation of old surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint completeall as specified and directed. |
| 46 | All as per item No. 45.00 above but on steel surfaces completeall as specified and directed. |
| 47 | Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed. |
| 48 | M&L for brick work in CM ( 1:6 ) with using modular size flyashbrick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified anddirected. |
| 49 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all asspecified and as directed . |
| 50 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified anddirected. |
| 51 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etccomplete all as specified and directed |
| 52 | M&L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregateas in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed. |
| 53 | Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing )and rubbish of the primeses complete all as specified and directed. |
| 54 | M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT)/ Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.36 sqmbut not exceeding 0.72 sqm ( ie)size 600x1200 in floors & Skirting/Dado or all verticle surface etc set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tileover and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified and as directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles or Make/Brand as specified in Particular Specification.Note : (a) Size and pattern / textureof GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE.(b) Glazed Coating on GVT / PGVT shallnot be less than 1mm thick . |
| 55 | M&L for scratch free Vitrified Tiles9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.18sqmbut not exceeding 0.36 sqm (ie) ofsize 600x600mm in floors & Skirting/Dado or all verticle surface etc set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tileover and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specifiedMake of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles or Make/Brand as specified in Particular Specification. |
| 56 | M&L for non –skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 57 | M&L for glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mm as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thickbacking coat on fair faces of brick work in CM (1:6) complete all as specified and as directed. |
| 58 | Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. |
| 59 | M&Lfor chequered cement concrete tiles with grey cementand pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6complete all as specified and as directed. |
| 60 | M&Lforchequered cement concrete tiles with grey cementand pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6complete all as specified and as directed. |
| 61 | M&Lfor machine cut kota stone slab inflooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and laid over and including and polishing complete all as specified and as directed. |
| 62 | M&Lfor 18-20 mm thickgreen marbleof approved quality ofany sizeset and jointed in greycementslurry laid over and including 15 mm thick screed bed in CM (1:4) includingpolish to be done by mechanical grinder and moulding edges compete all as specified and as directed. |
| 63 | M&Lfor 18-20 mm thick Black granite slab of approved quality ofany sizebeddedand jointed in greycement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonelaid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete allas specified anddirected. |
| 64 | M&Lfor 60mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-35 grade of approved shape, size and colourconforming to IS 15658-2006including joints filled with sand over and including stone dust 25m thick as in levelling course of interlocking complete allas specified anddirected. |
| 65 | M&Lfor 80mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-40 grade of approved shape, size and colourconforming to IS 15658-2006including joints filled with sand over and including stone dust 25m thick as in levelling course of interlocking complete allas specified anddirected. |
| 66 | S&F precast cement concrete type B-1 (1:2:4)(20mm graded stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4)complete all as specified and as directed. |
| 67 | Demolition of cement concrete (unreinforced) in roof/terrace other than ground floor etc, including existing roof treatment of any description not exceeding 15cm thickness complete all as specified and as directed. |
| 68 | M&L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compoundwhile concrete surface is green and finish the surface even and smooth without using extra cement complete all as specified and as directed. |
| 69 | M&L for 25mm thick cement concrete 1:2:4 type B0using 12.5mm graded stone aggregate as in roof top etc complete all as specified and as directed. |
| 70 | M&L for complete water proofing roof treatment with polymeric standard water proofing membrane, Aqua flex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness complete all as specified and described as under:-(a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer\"s specification complete all as specified and directed.(b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @0.15 Kg/Sqm shall be applied over the APP membrane surface. Note:- The water proofing treatment shall be executed through an authorised applicator of the manufacturer. |
| 71 | Roughening surface of roofby picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed. |
| 72 | M&L for water proofing Liquid chemical water based bituminous liquid membraneover Existing Roof Treatement after Cleaning the surface of roof in their respective itam complete all as specified and directed. Make: STP or Or Make/Brand as specified in Particular Specification.Note:- Application, Mixing or quantity of water proofing Chemical as per givenmanufacturer\"s instructions. |
| 73 | M&L for complete repair to sunken floor by providing water proofing treatment to sunken floor surfaces of RCC slabby the following specifications complete all as specified and directed :-(a)PCC 1 : 1.5 : 3 type A0using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compoundmanufactured by Dr FIXIT or make as per PS as approved, finish the surface even & smooth without using extra cement.(b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion.(c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm oncomplete sunken surfaces of floor & wall and providing necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (d) Two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application complete all as specified and directed. Note : Top Floor finished Area shall be measured for payment. |
| 74 | S&Fprecast cement concrete louvers and jallies 50mm thick (measured solid), type B0 1:2:4 (12.5mm graded stone aggregate) set in cement mortar (1:4) including all moldings but excluding frame complete all as specified and as directed. |
| 75 | S&F Factory Made 18mm thick 100% Solid CNC CUT WPC ( Wood polymer Composite) Plain Jali of required size & approved design, comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge. Make:- Rajshree or Make/Brand as specified in Particular Specification.Note:-(a)Material test certificate and authentication should be compulsory provided by the manufacturing company (b) Used for Kitchen/Balcony Doors, Cabinets, Ceiling, Panelling & interior decoration uses |
| 76 | S&F in repairs Rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part Icomplete all as specified and as directed. |
| 77 | S&F in repairs Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part Icomplete all as specified and as directed. |
| 78 | S&F in repairs Rotational moulded Polyethylene water storage tank 2000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part Icomplete all as specified and as directed. |
| 79 | S&F Rotational moulded Polyethylene water storage tank 5000 liters capacity (cylidrical vertical with closed top) of three layer or more hoisted and fixed in position complete all as specified and as directed. |
| 80 | Disconnecting existing 500 litre capacity tanks, setting aside (or lowering if required) for repairs, reconnecting and re-fixing in position after Cleaning of PVC water storage tanks including emptying the water tanks manually (Contractor to use of mechanical & manual means as & when required.) removing silt from bed level, cleaning the walls & bottom of tank by soap solution , spraying anti bacterial agent and disinfection by ultra violetradiation. Disinfection with Potassium per magnate (KMNO4)solution & finally cleaning the surface with fresh water complete including disposal of rubbish sludge by mechanical transport beyond municipal limits. (Rate includes cost of writing date ofcleaning with paint after removing the old date by painting allcomplete) complete all as specified and directed. Note:- Measurment of the above Item depends tank Capacity only. |
| 81 | All as per item 80.00 above but 1000 Litre capacity tank |
| 82 | S&F Water storage tank Top cover/Cap for all type storage water tank of HDPE material complete all as specified and directed. |
| 83 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 84 | All as per item 83.00 above but20mm bore complete all as specified anddirected. |
| 85 | S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed. |
| 86 | All as per item 85.00 above but20mm bore complete all as specified and as directed. |
| 87 | S&F 25mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed. |
| 88 | S&F in repair for 15mm bore bib taps chromium platedwith crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrulecomplete all as specified anddirected. |
| 89 | S&F Brass Spindle for any size of bore complete all as specified anddirected. |
| 90 | S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified anddirected. |
| 91 | S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specifiedand directed. |
| 92 | S&F in repair fancy type chromium plated 15mm boretwo way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 93 | S&F in repair CP wall mixer for mixing hot & cold water screwed down for ironpipe 15mm borecomplete all as specifiedand as directed. |
| 94 | S&F in repair 125 mm size chromium plated showerrosewith siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes comlete all as directed. |
| 95 | S& F in repair CP toilet paper holder complete all as specified and as directed. |
| 96 | S&F in repairs vitreous china urinal bowl urinal flat back, size of 535x355x340mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal.complete all as specified and as directed. |
| 97 | S&F in repairs vitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified and as directed . |
| 98 | S&F in repairs vitreous china squatting pan `Orissa \" pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including \"P\" or \"S\" trap complete all as specified and as directed. |
| 99 | S&F in repairs PVCvalve less,syphonic action type flushing cistern 10 litres, low level ,white with inlet ball valve,float and handle including bracketsand connection to pipe and fixing of chainand pull or lever if any complete all as specified and directed. |
| 100 | S&F in repair water jet spray CP 15 mm bore size along with PVC cord to EWC complete all as specified and as directed. |
| 101 | S&F in repair CP health faucet with flexible pipe of one mtr length including wall hook forEWC complete all as specified and as directed. |
| 102 | S&F in repair vitreous china wash hand basin white flat back, size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed. |
| 103 | S&F in repairs vitreous china wash basin white (oval shaped under counter) of size not less than 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed . |
| 104 | S&F in repairs vitreous china wash basin white table top of size 460x350 including 32mm brass CP waste coupling and all other fittings complete all as specified. |
| 105 | S&F in repairs PVC (SWR) floor trap plainwith stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed. |
| 106 | S&F in repair 600x450mm beveled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer ccomplete all as specified and directed. |
| 107 | S&F in repair kitchensink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wallor including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sinkcomplete all as specified and as directed. |
| 108 | S&F in repairs PVC connection15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed. |
| 109 | S&F in repairs PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified and as directed. |
| 110 | S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed. |
| 111 | S&F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed |
| 112 | S&F in repair cornershelf of 300 mm size with ABS brackets complete all as directed and specified. |
| 113 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 114 | Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed. |
| 115 | S&F 0.50mm thick (including coated thickness) pre-colourpre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa asin roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. |
| 116 | Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed. |
| 117 | S&F MS steel Hollow Sectionwork in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 andIS-1161-1979 grade ST-240 complete all as specified and as directed. |
| 118 | S&FJoist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed. |
| 119 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed |
| 120 | S&F for Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 121 | M&L for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified. |
| 122 | S&F PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on PVC frame as per specifications and Manufacturer instruction, including taking down of old board, complete all as specified and directed. |
| 123 | S&F PVC Ceiling Lining (False Ceiling) including complete frame work for PVC Ceiling consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on frame work as per requirement on site complete all as specified and directed by Engr-In-Charge. |
| 124 | S&FGypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finishCeiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. |
| 125 | S&F PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.This wall panaling consisting of PVC insulated panels having wall thickness of 2mm ( ±0.2 ) PVC sheet ofDensity 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, and the desired thickness of EPS ( Dependent on the Insulation Required ) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The PVC Strips of5mm ( ± 0.25 ) thick PVC Sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both the panels, using solvent cement. 900 heat bent strips of 5mm thick PVCsheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints / pillars etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. Make- Rajshree or Make/Brand as specified in Particular Specification. |
| 126 | S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed |
| 127 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement; 4 coarse sand) furrowing the under layer with scatching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 silver/grey cement: 1/2 coarse sand: 2 Marble stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed.Note:-Grooves shall be measured and paid separately.(b) The quoted rate shall be inclusive of all necessary scaffolding work, lifting arrangement and safety devices upto 25.00m height as required at site. |
| 128 | Forming groove of size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed of the Engineer-in-charge.Note:-The quoted rate shall be inclusive of all necessary scaffolding work, lifting arrangement and safety devices upto 25.00m height as required at site. |
| 129 | M&L for 16-20mm Granite/Stone Cladding (of any type) work(table rubbed and polished)as in piIllars/ walls upto 12m height over and including10mm rendering in cement mortar (1:4) including pointingin white cement (1:2) mixed with marble dust andadmixture of pigment to match with shade of granite including grinding and polishing including necessary scaffolding arrangmentcomplete all as specified and as directed of the Engineer-in-charge.Note: (a) Colour,shade and pattern of granite shall l be approved by GE. (b)Rendering is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site. |
| 130 | S&F in repair Door sensor machine for sliding both side door of toughened glass 12 mm thick for main entrance of Auditorium gate, including with parts which required to complete repair of Motor, Module, Power Supply etc with all required accessories,etc complete all as specified and directed at site by Engr-in-charge.Make:-Ozon, Dorma or equvalent as approved by GE. |
| 131 | Taking down Urinal/Urinal Sensor machine, repair its parts as like battery,sensor part,wiring etc and including all repairs machine,change repair parts etc,and refixing the Urinal/Urinal sensor in the same place where from T/D etc complete all as specified and directed at site by Engr-in-charge.Make OF PARTS:-Jaquar,CERA,Hindware and Parryware, parts only. |
| 132 | S&FAluminium Composite Panel (ACP) of any colour of exterior edge for cladding near entrance of Alucobond/Alstrong/Brand approved equivalent make for external wall /column / canopy cladding in combination of solid / Metallic colours, including all necessary frame work and complete weather sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface shallbe furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of ECCA /AAMA and conforming to the mechanical properties of panel as per detailed technical specifications. The system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure of 150 Kg/Sqm. All hardware shall corrosion resistant frame out of anodised aluminium membercomplete all as specified and directed at site by Engr-in-charge. |
| 133 | S&F 10-15mm thick Polycarbonate sheet in dome structure/similar condition with rubber neoprene/similar packing material fixed and packed with sheet including dismantling of existing sheeting complete all as specified and as directed. Make:As per Particular Specifications or Superior quality as approved by GE. |
| 134 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed at site by Engr-in-charge. |
| 135 | Polishing on Granite Stone Cladding work where ever required to give high gloss finish complete all as specified and directed at site by Engr-in-charge.Note - (a) Polishing is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etcrequired at site. |
| 136 | M&L for 3mm thick Aluminium Composite Panels (ACP) any colour offor fixing in Alumimium door/partition//Wall Lining with all other necessary accessories for fixing complete all as specified and directed. |
| 137 | M&L for Drilling & Providing Anchoring to granite wall cladding height up to 15.00m the granite wall anchor Fasteners with Fency type Rivet/Bolt of suiatble size & depth approved by Engr in Charge at all four edges without damaging the existing super structure and filling of hole & polished the granite stone cladding with approved polishedfor achiving glossy finish complete all as specified and directed by Engr-in-Charge.Note - (a) The Repair Cost of damaging the existing structure included in quoted rate.(b) The Cost of making hole in the Granite stone upto suitable depthincluded in quoted rate.(c) The Cost of granite polishing/grinding shall be measured paid separately under relevant item.(d) The material & size of anchor fastner/Hardware should be approved by the Engr in Charge.(e) Drilling & Anchoring is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender. The quoted rate shall be inclusive of all necessary scaffolding work, lifting arrangement and safety devices upto 15.00m height as required at site. |
| 138 | S & Fmodular type stainless steel basket size 500 mm x 530 mm x 100 mm (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangementcomplete all as specified and directed. |
| 139 | All as per item No 193.00 above but basket size500 mm x 530 mm x 150 mm |
| 140 | All as per item No 193.00 above but basket size500 mm x 530 mm x 200 mm |
| 141 | S&F 100mm size MS mat/glossy finish handle complete all as specified and directed. |
| 142 | S&F stainless steel self closing hinge of 75mm size for PVC door shutter complete all as specified and directed. |
| 143 | S&F 50x15mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed. |
| 144 | S&F mild steel drawer cabinet channel for moving the drawer etc complete all as specified and directed. |
| 145 | S&F 40mm flaps width (when open) continuous (Piano) hinges mild steel bright finish or electrogalvanised complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
