|
| 1 | Foundation excavation in hard soil including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete. |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost,conveyance and royality of sand etc. complete. |
| 3 | Cement concrete 1:3:6 using 4cm. size HBG crusher broken metal including cost,conveyance and royality of materials curing etc. complete. |
| 4 | P.C.C. (1:2:4) using 12mm size Crusher broken hard granite Chips including cost, conveyance, Taxes and Royality including hoisting & laying the concrete in position complete with curing etc. complete. |
| 5 | Masonry work with Fly Ash Bricks having crushing strength between 75kg/sq.cm twith dimensional tolerance ±8 percent in c.m. 1:6 in F & P including cost conveyance and royality of materials curing etc. complete. |
| 6 | Masonry work with Fly Ash Bricks having crushing strength between 75kg/sq.cm twith dimensional tolerance ±8 percent in c.m. 1:6 in S / S including cost conveyance and royality of materials curing etc. complete. |
| 7 | R.C.C. work M-20 grade using 20mm.and down grade HBG crusher broken chips including hoisting, laying, cost, conveyance and royality of materials curing including centering and shuttering etc. complete. |
| 8 | Column Base |
| 9 | Plinth beam |
| 10 | R.C.C Beam & Coloum |
| 11 | Lintel |
| 12 | Chajja |
| 13 | Roof Slab |
| 14 | Supplying,fitting and placing uncoated HYSD bar reinforcement as per drawing and technical specification including cost,conveyance and all taxes of steel and binding wire etc.complete. |
| 15 | Supplying, fitting, fixing of M.S. grill in windows including screws with cost of conveyance, taxes of all materials, labour, T&P etc complete etc as per direction of Engineer-in-charge. |
| 16 | 6mm. thick cement plaster (1:4) to R.C.C. surfaces finished smooth including closed deep chipping and slury treatment, cost, conveyance and royality of materials curingetc. complete. |
| 17 | 12mm. thick cementplaster in c.m. 1:6 over brick masonryincluding cost conveyance and royality of materials curing etc. complete. |
| 18 | 16mm thick cement plaster in C:M (1:6) including cost conveyance and royality of materials curing etc. complete. |
| 19 | Supplying, fitting & fixing vitrified tile in floors of size 600mm x 600mm of approved make conforming to IS ; 13755 laid on 20mm thick cement mortar (1:4) & filling joints with white cement of approved quality incl. cost of all materials, labour Contractor\"s profit etc. required for the work all complete as per the direction of E.I.C. |
| 20 | Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. |
| 21 | Fixing ceramic floor tile in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles |
| 22 | Fixing colour Glazed tiles in wall on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including polishing complete as per direction of Engineer-in-charge. |
| 23 | Fixing chequred tiles in floors,treads or steps and landings on 25 mm thick C:M (1:1) jointed with neat cement slurry mixed with pigments to match the shades including cost for rubbing, polishing & cost of marbel tiles |
| 24 | Supplying, fitting & fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mm x2mm @ 0.90m C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials labour T&P etc required for the completion in all respect. |
| 25 | Supplying, fitting, and fixing up window(sliding type) made up Aluminium section 9778 as windows frame, section No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fittings, cost of glass etc complete as per direction of Engineer-in-charge. |
| 26 | Providing, fitting, fixing of Al. door withanodised Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section no 9221 and 6mm black glass in top portion with 12mm thick prelaminated board in bottom portion fixed on door framed by means oftappered clip No-4660 and the frame to be completed by means of jointing angle No-1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete. |
| 27 | Painting two coats of enamel paint over a coat of primer of approved quality over iron work . |
| 28 | Priming with wall cement primer (water bound) of approved shade on new work to give an even shade excluding cost of primer etc complete. |
| 29 | Wall painting with two coats weather coat paint of approved shade on new wrk to give an even shade excluding cost of paint. |
| 30 | 20 mm thick cement plaster ( 1:4 ) for grading plaster over roof slab with cost carriage royalty etc. |
| 31 | Wall painting two coats with plastic enamel paint of approved shade on new work to give an even shade including cost of paint |
| 32 | Finishing wall surface of walls with cement basedwall Puttyof approved make and finished smooth and even surface |
