Tender For Work Of Installing Pathway And Bollard Lights In Central Park, Bida Bhiwadi. - Construction Of Cement Concrete Kerb With Channel With Top And Bottom Width 115 And 165 Mm Respectively, 250Mm High In M20 Grade Pcc On M-10 Grade Foundation 150 Mm , bhiwadi-Rajasthan

Tender For Work Of Installing Pathway And Bollard Lights In Central Park, Bida Bhiwadi. - Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250mm high in M20 grade PCC on M-10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M-20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per MORTH specification Clause 408. Using Concrete Mixer 2 Providing & Fixing of IK10 IP65 protected 600 mm height LED Bollard Luminarie with base plate made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy ≥ 90 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<20% and input Voltage range of 90-270V AC at 50Hz. System life of 30000 Burning hours with 70% of Initial Lumens maintained Light output in Cool white or Warm White Colour as per engineers choice. driver current <750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . Minimum lumen output 800 lm Bollard 3 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work 4 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4-Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure A attached with this BSR. 10.0 Sq. mm 4 core

INR 590 /-

INR 38600.0 /-

INR 19.30 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB