Tender For Annual Maintenance Contract Of Street Light Network Along With 03 Year Amc At Ia. Ssgt Road Ghaziabad - Supply & fixing 90 W LED Street light having die cast aluminium body and diffuser with driver set suitable for 90 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AA with 5 year warrenty against defects,damaged & missing)Make: Cormpton/Philips/Bajaj/wipro. 2 Supply & fixing 120 W LED Street light having die cast aluminium body and diffuser with driver set suitable for 120 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AA with 5 year warrenty against defects,damaged & missing)Make: Cormpton/Philips/Bajaj/wipro. 3 Supply & fixing steel tubular pole 9.0 Metre long designated 410 SP-29 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 4 Supply & fixing 32mm dia,1.20M long GI bend pipe with 02 nos. clamp of 50x6mm MS Flat suitable for fixing street light on ST pole including cost of men and T&P. 5 Aviation Lights 6 S/F of street light junction box made of SMC material complete with 4 way terminal block, cable gland etc. 7 S&F Annealed tinned Copper flexible soft PVC/Rubber insulated trailing cable of 4.0 sq.mm 5 core in full length suitable upto 30 Mtr height. 8 Supply and fixing of male-female plug socket for high mast lighting system complete in all respects. 9 Rewinding/Repairing of 1.5 HP 3 Phase 415V Burnt AC Power Tool Motor with B-Class super enamel Copper wire including dismantling and re-fixing at Original place 10 Gear oil of winch Machine 11 Oiling & greasing of SS wire rope set 12 Supply & fixing Gl lantern carriage made from 50NB ERW Class B Pipe suitable for 16/20/30 mtr lighting fixing including lowering & hoisting of system and all other associated work along with cost of men, material and T&P. 13 S&F of stainless steel grade AIS1316 steel wire rope set 6-8 mm diameter in full length suitable for 12/16/20/30 Mtr height on existing winch machine including making/modification proper arrangement for installation in existing machine. 14 S&F of 25 amp. double pole MCB (10KA cat B) for control panel complete in all respects 15 Supply & fixing Astronomical time switch L&T/Siemens/C&S or equel brand including cost of connection, material, men and T&P. (26+11) 16 S/F of 6 Amp to 32 Amp SP MCB (10KA) B curve 17 3x1.5 Sq mm PVC insulated copper cable 18 S&F of 63 amp. 4 pole MCB (10KA cat B) for control panel complete in all respects 19 Supply & fixing 3-Phase, 63A 415V Power Contractor ML-3 type or equel for Automatic Street & High Mast Control Panel in cluding cost of Connection, men and T&P. 20 Supply & fixing 25A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of digitel/time switch TSO 100 series with ML-3 contactors,HRC fuses/MCB/MCCB/ isolating switch metering instrument & instrument box with CTs etc or as directed . Design & material will be approved by Engineer in charge. 21 Supply & fixing 40A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of digitel/time switch TSO 100 series with ML-3 contactors,HRC fuses/MCB/MCCB/ isolating switch metering instrument & instrument box with CTs etc or as directed . Design & material will be approved by Engineer in charge. 22 Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respec 23 S/E of D clamps of 38mm X 6mm flat iron for wall/ roof type service bracket with bolts, nuts etc, complete in all respects including painting with aluminium paint =245*2+10*2=510 24 Cleaning & spray painting of ST bend pole and power ST pole (up to safe height) with one coat of red oxide primer and two coat of alum. paint/PU paint as per direction of Engineer incharge including cost of all material, men and Hydraulic crane, other T&P. (Burger/Nerolac/ Asian make) After Two Year. 25 Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC Insulated and PVC sheathed/XLPE aluminium conductor 16/25/70 sq.mm 3.5 core cable of 1100 v grade complete rates 26 Supply and laying of 16 sqmm,2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 27 Supply and laying of16 sqmm, 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 28 Supply , Sagging & tensoning of overhead line with insulated ACSR weasel conductor including binding etc complete in all respects. 29 Dismantling & re-grouting of street light/Steel tubler (upto 12 Mtr long) Tilt/sick bend pole in 1:3:6 ratio cement concrete with stone pad including strengthening of pole by providing additional 04 Nos. support of 65x65x6mm or higher size MS angle in suitable length with the help of welding/cutting as per technical specification. 30 Painting letters (Pole No.) 2.5cm up to 8.0 cm size complete on Street light Pole/Panel/Other electrical properties under UPSIDA including cost of all material, men and T&P 31 Trimming of tree branch around the street light pole/ST pole/Central Varge for proper illumination & proper disposal of tree branch collecting on trolley or similar moving item including cost of men, trolley, T&P etc. (1000 x 3 Year) 32 Hiring Charge of 80-100 feet expandable street light repairing hydraulic lift, capacity 300 Kg including cost of operator, mounting vehicle and fuel etc. (8 Hrs x 4 day x 36 Month) 33 Cost of material spares, wire, fuses, small accessories, alum. Lug up to 16 sq.mm, small cable gland, insulation tap,plastic tie, screw, nut & bolts, old cloth, cleaning spray and other small associated required for up-gradation work etc. 34 Strengthen of Other ST pole foundation by providing new concerting including cost of all material men and T&P. 35 Providing operating cum maintenance staff of the entire street light network for routine maintenance of street lighting system, administrative, site office and staff colony etc including dismantling & re fixing of other street lights of UPSIDA with travelling expenses etc. (Electrician cum supervisor 01 nos, helper 01 nos) 36 Making Steel Fabricated Complaint Booth /Store room in IA ( as per site Situation)
