Power Boards / Undertakings / PSU Closing in 0 days TDR #49554541

Tender For Electrification Jobs Of Block No-110 At Inrp Site, Tarapur

Issued by Boards / Undertakings / PSU · tarapur, Maharashtra
Tender Value
80.76 Lakhs
Estimated cost
Bid Submission
30 Jun 2025
0 days left
EMD
1.61 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
tarapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender For Electrification Jobs Of Block No-110 At Inrp Site, Tarapur

BOQ

Name of Work: Electrification Jobs of Block No-110 at INRP Site, Tarapur
Sl. No. Item Description
1Supply, Installation, Testing and Commissioning of following configuration415V, 3-phase, 4 wire, double door, with R Y B Phase indication and MCB position indication through glass front, IP-54,Prewired with HFFR copper wires, horizontal type, metallic Double Door, Phase Segregated three pole and neutral MCB Distribution Board fabricated out of 2 mm thick ,powder coated with RAL7035 shade, pre-galvanised G.I. sheet steel, suitable for surface mounting complete with appropriate rating of tinned copper bus bar (fork type), neutral bus bar, earth bar, din bar, brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, etc. as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in-charge.
26 way having 1 no. main incomer of 25A TPN MCB, Isc=10kA, Type C with 1 no. 25A, Isc=10kA, DP, MCB and RCCB(100mA) as incomer for each phase and 18 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications.
3Supply
4Installation, Testing and Commissioning
54 way having 1 no. main incomer of 25A TPN MCB, Isc=10kA, Type C with 1 no. 25A, Isc=10kA, DP, MCB and RCCB(100mA) as incomer for each phase and 12 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications.
6Supply
7Installation, Testing and Commissioning
8Supply, Installation, Testing and Commissioning of following configuration 240V, 1-phase, 2 wire, with Phase and MCB position indication through glass front, Pre-wired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanised G. I sheet steel, powder coated with RAL7035 shade, suitable for surface mounting complete with appropriate rating of tinned copper bus bar/Cu Wire, neutral bus bar, brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per tender technical specifications.
98 way having 1 no. main incomer of 40A DP MCB and RCCB(100mA), Isc=10kA, Type C and 8 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications.
10Supply
11Installation, Testing and Commissioning
128 way having 1 no. main incomer of 25A DP MCB and RCCB(100mA), Isc=10kA, Type C and 8 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications.
13Supply
14Installation, Testing and Commissioning
156 way having 1 no. main incomer of 16A DP MCB and RCCB(100mA), Isc=10kA, Type C and 6 nos. outgoing of 6A SPN MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications.
16Supply
17Installation, Testing and Commissioning
186 way having 1 no. main incomer of 16A DP MCB and RCCB(100mA), Isc=10kA, Type C and 6 nos. outgoing of 6A DP MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications.
19Supply
20Installation, Testing and Commissioning
214 way having 1 no. main incomer of 16A DP MCB and RCCB(100mA), Isc=10kA, Type C and 4 nos. outgoing of 6A DP MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications.
22Supply
23Installation, Testing and Commissioning
24SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, Industrial box type (approx. dim.130mm x 95mm x 1219mm), surface mounted 4ft fixture along with two nos. of 18W, 2340 lm, minimum 130 lm/w system efficacy, CCT 6500K and CRI>80, THD<10%, PF>0.95, 4ft LED tube. The luminaire shall meet IP20 rating. The LED shall be mounted on extruded aluminium box which acts as heat sink with extruded poly carbonate material which gives diffused light. The total power consumption should not exceed 38W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
25Supply
26Installation and Testing
27SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, LED 4ft Industrial Batten (approx. dim. 75mm x 95mm x 1219mm) with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 130 lm/W. The luminaire should have a CCT of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should have made of Extruded Aluminium with extruded PC diffuser. The total power consumption should not exceed 20W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
28Supply
29Installation and Testing
304ft Industrial Batten (approx. dim.140mm x 105mm x 1219mm) with 2x18W LED Tube (acid & corrosion proof) with a nominal system lumen output of 4320 lumens and a minimum system efficacy not less than 120lm/W.The luminaire should have a colour temperature of 6500K and CRI>80. The luminaire shall meet IP65 rating with THD < 10% and PF > 0.95. The luminaire housing should have made of • Body - glass reinforced polyester (GRP), RAL 7035 • Gasket - polyurethane • Diffuser - UV stabilised prismatic acrylic material. The total power consumption should not exceed 38W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
31Supply
32Installation and Testing
33SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, LED Bulkhead with a nominal system lumen output of 1200 lumens and a minimum system efficacy of 120 lm/W. The luminaire should have a CCT of 6500K and CRI > 80. The luminaire shall meet IP65 rating with THD < 10% and PF > 0.95. The luminaire housing should have made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 10W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
34Supply
35Installation, Testing and Commissioning
36SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, LED peripheral luminaire with a nominal system lumen output of 4200 lumens and a minimum system efficacy of not less than 120 lumens/watt. The luminaire should have CCT of 5700K and a CRI>70. The luminaire shall meet IP66, IK 07 rating with THD<10% & Pf>0.95. The luminaire housing should be made of pressure die cast aluminium. The total power consumption should not exceed 35W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
37Supply
38Installation, Testing and Commissioning
39SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, LED High-bay with a nominal system lumen output of 18000 lumens and a minimum system efficacy of not less than 140 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70B50. The luminaire should have a CCT of 5700K and CRI > 80 and SDCM<5. The luminaire shall meet IP66 and IK 08 rating with THD < 10% and PF > 0.95 and in-built surge protection of 4kV. The luminaire housing should have made of High Pressure die cast Aluminium with wide beam optics and having gasket of heat proof silicone rubber ring. The total power consumption should not exceed 130W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
40Supply
41Installation, Testing and Commissioning
42SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, LED integral driver flood light with a nominal system lumen output of 16,800 lumens and a minimum system efficacy of 140 lumens/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70B50.The luminaire should have a CCT of 5700K and a CRI>70. The luminaire shall meet IP66 rating with THD<10% & Pf>0.95. The luminaire housing should be made of pressure die cast aluminium. The total power consumption should not exceed 120W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
43Supply
44Installation, Testing and Commissioning
45SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, LED Recessed 2ft x 2ft Luminaire with a nominal system lumen output of at least 4000 lumens and a minimum system efficacy of 125 lm/W. The luminaire should have a CCT of 5700K and CRI>80. The luminaire shall meet IP20 rating with THD<5% and PF >0.95, UGR<16% & SDCM <= 4. The luminaire housing should have made of powder coated metallic CRCA with high efficiency optic diffuser. The total power consumption should not exceed 36W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
46Supply
47Installation, Testing and Commissioning
48SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, LED integral driver flood light (acid & corrosion proof) with a nominal system lumen output of 5000 lumens and a minimum system efficacy of 140 lumens/watt. The luminaire should have CCT of 6500K and a CRI>80. The luminaire shall meet IP66 rating with THD<10% & Pf>0.95 The luminaire housing should be made of Stainless steel. The total power consumption should not exceed 36W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications.
49Supply
50Installation, Testing and Commissioning
51SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box, LED integral driver flood light with a nominal system lumen output of 10,000 lumens and a minimum system efficacy of 140 lumen/watt. The luminaire should have CCT of 6500K and a CRI>80. The luminaire shall meet IP66 rating with THD<10% & Pf>0.95. The luminaire housing should be made of pressure die cast aluminium. The total power consumption should not exceed 72W (including driver).
52Supply
53Installation, Testing and Commissioning
54SITC of LED light fittings complete with light fitting accessories, including accessories, flexible GI conduit sleeves, PVC conduit bushes, Cu cable lugs, LED Down lighter with a nominal system lumen output of 2400 lumens and a minimum system efficacy of 130 lm/W. The luminaire should have a CCT of 5700K and CRI > 80. The luminaire shall meet IP20 rating and IK06 rating, Lifetime (L70/B50): 50,000 h with THD < 10% and PF > 0.9. The luminaire housing should have made of High pressure die cast Aluminium with high quality Polycarbonate diffuser. The total power consumption should not exceed 19W (including BIS Compliant integrated driver). Approx. dimensions of down lighter shall be 250 dia and 75 height in mm and other parameters as per tender technical specifications.
55Supply
56Installation, Testing and Commissioning
571 no. of 6A and 1 no of 16A, Single phase Industrial three pin Socket with corresponding Type C-Curve, Industrial type MCBs, Isc=10kA, along with pre- powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
58Supply
59Installation in existing embedded GI Box
60Pre-Galvanised sheet steel Distribution box with 1 no. of 6A and 1 no. of 16A, Single phase Industrial three pin Socket along with Industrial Plug Tops with corresponding Type C-Curve, Industrial type MCBs, Isc=10kA,mounted on suitable DIN rail and as per technical specifications
61Supply
62Installation on concrete/brick wall
631 no. of 16A, Single phase Industrial three pin Socket with corresponding Type C-Curve, Industrial type MCB, Isc=10kA,along with pre- powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
64Supply
65Installation in existing embedded GI Box
66Pre-Galvanised sheet steel Distribution box with 1 no. of 16A, Single phase Industrial three pin Socket along with Industrial Plug Top with corresponding Type C-Curve, Industrial type MCB, Isc=10kA, mounted on suitable DIN rail and as per technical specifications
67Supply
68Installation on concrete/brick wall
691 no. of 6A, Single phase Industrial three pin Socket with corresponding Type C-Curve, Industrial type MCB, Isc=10kA, along with pre- powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
70Supply
71Installation in existing embedded GI Box
72Pre-Galvanised sheet steel Distribution box with 1 no. of 6A, Single phase Industrial three pin Socket along with Industrial Plug Top with corresponding Type C-Curve, Industrial type MCB, Isc=10kA,mounted on suitable DIN rail and as per technical specifications
73Supply
74Installation on concrete/brick wall
751 nos. of 6A, Single Pole, Isc=10kA, Type C-Curve, MCBalong with pre- Galvanised sheet steel Face Plate and suitable DIN rail and mounting arrangements as per technical specification.
76Supply
77Installation in existing embedded GI Box
78Pre-Galvanished sheet steel Distribution box with 1 no. of 6ASingle Pole, Isc=10kA, Type C-Curve, MCB, mounted on suitable DIN rail and as per technical specifications
79Supply
80Installation on concrete/brick wall
812 nos. of 6A, Single Pole, Isc=10kA, Type C-Curve, MCBalong with pre- Galvanised sheet steel Face Plate and suitable DIN rail and mounting arrangements as per technical specification.
82Supply
83Installation in existing embedded GI Box
84Pre-Galvanished sheet steel Distribution box with 2 nos. of 6ASingle Pole, Isc=10kA, Type C-Curve, MCB, mounted on suitable DIN rail and as per technical specifications
85Supply
86Installation on concrete/brick wall
873 nos. of 6A, Single Pole, Isc=10kA, Type C-Curve, MCBalong with pre- Galvanised sheet steel Face Plate and suitable DIN rail and mounting arrangements as per technical specification.
88Supply
89Installation in existing embedded GI Box
90Pre-Galvanished sheet steel Distribution box with 3 nos. of 6ASingle Pole, Isc=10kA, Type C-Curve, MCB, mounted on suitable DIN rail and as per technical specifications
91Supply
92Installation on concrete/brick wall
93Pre-Galvanised sheet steel Distribution box with 1 no. of 6A, Single phase Industrial three pin Socket along with Industrial Plug Top, and as per technical specifications
94Supply
95Installation on concrete/brick wall
961no. of 6A, Single phase Modular Decorative Type Switch with heavy duty polycarbonate Box, Face Plate and suitable mounting arrangements as per technical specification.
97Supply
98Installation on concrete/brick wall
992 nos. of 16A, Single phase Modular Decorative Type three pin Socket with Polycarbonate box, accordingly rated Switches for each Socket and heavy duty polycarbonate Face Plate, plug topsand suitable mounting arrangements as per technical specification.
100Supply
101Installation on concrete/brick wall
1023nos. of 16A, Single phase Modular Decorative Type three pin Socket with Polycarbonate box, accordingly rated Switches for each Socket and heavy duty polycarbonate Face Plate, plug topsand suitable mounting arrangements as per technical specification.
103Supply
104Installation on concrete/brick wall
105Occupancy Sensor with 3 way switch
106Supply
107Installation and Testing
108Supply and fixing of heavy duty Class-B Galvanised steel (G.I.) ERW 25mm conduit pipe of following sizes along with all accessories such as bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, cleating with heavy duty GI saddles or suit to site clamps on RCC wall, column, steel structural, etc. as required under the instruction of Engineer-in-incharge. Surface type junction box shall be provided.
109Supply
110Installation
111Supply and laying of 14 SWG tinned solid copper conductor throughout along the conduit including fixing with hose clips, lugs, brazing etc as required.
112Supply
113Installation
114Supply of Single Core HFFR wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS 17048: 2018 (latest edition) and as per conductor class 2 of IS: 8130 / 1984 as per technical specification
1151.5 Sq. mm
1162.5 Sq. mm
117Installation/drawing through concealled/ surface conduit and wiring and termination at both ends of Single Core HFFR wires (Copper)of size mentioned below in voltage grade 1100 V as per the IS 17048 : 2018.As per conductor class 2 of IS: 8130 / 1984 as per technical specification
1181.5 Sq. mm
1192.5 Sq. mm
120Supply and laying of 10 sq. mm tinned copper conductor, connection with earth pad at one end and DBs at other end clamping, brazing etc. and as tender technical specifications.
121Supply
122Laying of conductor after chasing floor or wall and finishing the same.
123Supply and installation of test link box for earth pit connection and interconnection of down conductor from lightning protection system to lightning earth pit and should consist of 2mm thick powder coated pre-galvanised G.I. weather proof sheet enclosure with cover, having2 parallel paths of 50 mm x 3mm copper strip link, teflon sealing after connection, earthing stud, suitable for connecting of 8 nos. of 95sqmm earthing conductors etc as required.
124Supply
125Installation of test link box on wall and termination of earthing conductor using lugs
126Supply and Installation of 25 mm X 3 mm thick copper strip including connection/ terminating with brass nut, bolt, washer etc. as required.
127Supply
128Installation, Testing
129Supply and fixing vertical air termination made up of 20mm dia, 1 mtr long copper rod attached to 145 mm dia. Copper sphere having drilled and tapped holes for fixing 5 nos. of 390mm long spikes and square copper base plate of 150 mm length and 10 mm thickness as per technical specification and approved drawing.
130Supply
131Installation and Testing
132Supply of tinned Cu Lugs , ring type, of following sizes as per attached technical specification
13395sqmm stranded bare tinned copper conductor
13410sqmm stranded bare tinned copper conductor
135Supply of required material and making of straight exothermic braze joints of copper conductors (95 sqmm) as per technical specification.
136Supply of required material and making of \"T\" type exothermic braze joints of copper conductors (95 sqmm) as per technical specification.
137Supply and Installation of 2mm thick pre-galvanished GI sheet including marking,cutting (as per site requirement)and erection on top of JB openings on wall and ceiling at approximate height of 5mtrs.
138Supply
139Installation

AI Tender Summary

OUR REF NO 49554541
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 80.76 Lakhs
LAST DATE 30-06-2025
Authority
Authority Name Bhabha Atomic Research Centre
Work Description Tender For Electrification Jobs Of Block No-110 At Inrp Site, Tarapur
Basic Detail
Tender No BARC(T)/NRB/INRPC/ELE-61/2025/ 890
Bidding Type Tender
Location
City tarapur
State Maharashtra
Key Dates
Publish Date 07 Jun 2025
Submission Date 30 Jun 2025
Open Date 01 Jul 2025
Finance
Tender Value 80.76 Lakhs
Tender Fee Ref. Documents
EMD 1.61 Lakhs
Exemption Not Available
Document List
29bdf74f-3886-4a8b-a75d-1cee7710f4a1.html
BOQ_907586.xls
Technicalbid.xls
tenderdoc.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 07, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 30, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 01, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

29bdf74f-3886-4a8b-a75d-1cee7710f4a1.html

xls

BOQ_907586.xls

xls

Technicalbid.xls

pdf

tenderdoc.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders