supply installation testing and commissioning of Of Router, Network Items And Server In The Designated Server Area Of Diac At 2Nd Floor Of S Block, Delhi High Court, New Delhi-Supplying, Installation, Testing & Commissioning of Router alongwith software features and rack unit, 6 x 1G WANSD-WAN-enabled, 5G/LTE-ready modular enterprise branch router with 1 x PIM, 1 x NIM, and 1 x SM slot 10G IP throughput 2G SD-WAN throughput 4 x RJ45 + 2 x SFP embedded ports, up to 1G WAN Dual power supplies converged branch infrastructure along with superior throughput Network Plug-n-Play Connect for zero-touch device deployment at a speed up to 100 Mbps to 1 Gbps Mbps having Default memory double-data-rate 3 (DDR3) - 4 GB, Flash Memory - 8GB,Storage (M.2 SSD) default 16 GB,SD-WAN IPsec Throughput(1400Bytes) Up to 1.5Gbps, onboard WAN or LAN 10/100/1000 ports - 4 Nos, SFP-based ports- 1 No along with configuration, security licence key, mounting kit, blank plate and SNC with the existing network system i/c testing, connections & 5 year complete warranty etc. complete as required. 2 Supplying and Fixing of Wall Mount 12U Rack, with 600 depath, Front Glass Door with Lock, 2 pairs of Mounting Rails :- Standard Accessories:- 1U Cable Manager, Roof Mounted Fan Unit / 90 CFM / 230V AC,6 Way 5 Amp Power Distribution Unit, Mounting Hardware including Blank/Filler plate unit etc to cover the space etc. complete as required. 3 Supplying, installation, testing & commissioning of Layer-2 Twenty Four Port (24) UPOE Downlink & Uplinks Configuration 10/100/1000/10000 Ethernet Gigabit ports and Four(4) 10 G SFP uplinks, Dual Core CPU with 1024 MB per sec Memory (DRAM) and 2GB flash memory, Depending on the switch model, the IOS image automatically configure either the LAN Lite, LAN Base, or IP Lite feature set. LAN Lite models have reduced functionality and scalability for small deployments with basic requirements & stacking bandwidth 80 Gbps, IPv6 routing entries 1500, multicast routing scale 1000. Packet buffer per SKU 6mb buffers for 24- port gigabit ethernet models, .Up to 1TB of stacking bandwidth: With Stackwise-1T, Flexible and dense uplink offerings with 100G, 40G, 25G, Multigigabit, 10G, and 1G modular uplinks, Mixed Stacking with Backward Compatibility – Stack your X fiber switches withand X Multigigabit switches, bringing stackable high-speed fiber to the access, Highest Multigigabit Ports: With standalone and Stackwise-1T, X models enable 48 mGig ports in standalone and 448 mGig ports with an 8-member stack, Highest 90W UPOE+ Density: Enable your OT/IT needs with up to 36 ports of 90W UPOE+ for standalone or 288 ports of 90W UPOE+ with a 8-member stack, Stack Power with Backward Compatibility:.100G IPsec in hardware: With the new 2.0Sec UADP ASIC, the X comes with 100G line rate IPsec to enable various options for new edge connectivity Secure Tunnel connectivity: With the new edge, the C9300X enables secure connections to Secure Internet Gateway, Cloud Service Providers and Site to Site connectivity using IPsec tunnel with AES-256 Encryption and speeds up to 100G. 4 Supplying, Installation, Testing & Commissioning of 1 meter long Cat-6 Rj-45 patch cord, etc as required 5 Supply of following LC-SC patch cord (9/125) MMF Simplex, having connector A: LC duplex connector, ceramic ferrule, insertion typical 0.35dB. connector B: SC duplex connector, ceramic ferrule, insertion typical 0.35dB complete etc as required. 6 SITC of 10G Base SFP module SMfor 10Km (single-fiber bidirectional applications)TheSFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices, as depicted in Figure 2. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. Note in Figure 2 the presence of a Wavelength-Division Multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths. 7 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.A) 1 Run of Cable 8 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.A) 25 mm 9 SITC of in-house server with the following specifications:a. CPU-Intel-32 Coreb. RAM-128 GBc. OS Disk- 2X960 SSDd. Data Disk- 3X2.4 SSDe. Network Port- 10G SFP+f. Management Port- Port with Licenceg. Power Supply- Dual h.VM Ware- VMware vSphere Foundation (32 Core)h. Warrranty- 3 YearsComplete with installation and go live etc as required as per the satisfaction of the client.
