Repair/Rewinding Of Bs Make Submersible Pump-Set Under Ac-28 (Hari Nagar Constituency).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Jun 2025
0 days left
EMD
9900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
janakpuri → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair/Rewinding Of Bs Make Submersible Pump-Set Under Ac-28 (Hari Nagar Constituency).
BOQ
| Sl. No. | Item Description |
| 1 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 4 Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Thrust Plate 1 No., Guide Bush 6 Nos. Distance Bush 6 Nos. NRV body 1 No.,Rotor Sleeve Turning &Grinding 1Job, Balancing of rotor1 Job., Labour charges 1 Job |
| 2 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 7 Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos. Thrust Bearing 1 No., Guide Bush 3 Nos., Neck ring 8 Nos., Distance bush 3 Nos., Sand guard 1 No., Stamping Repairing. 1 Job., Rotor Sleeve Turning &Grinding 1Job, Epoxy paint of rotor 1 Job., Labour charges 1 Job |
| 3 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 8Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos. Upper Bush 1 No., Guide Bush 5 Nos. Neck ring 4 Nos., Distance Bush 5 Nos. Balancing of Rotor. 1 Job., Rotor end welding key way making 1 Job, Rotor Sleeve Turning &Grinding 1Job, Labour charges 1 Job |
| 4 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 11Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Thrust Bearing 1 No., Guide Bush 5 Nos., Distance Bush 5 Nos. Neck ring 4 Nos., Suction chamber 1 No., Epoxy Paint of Rotor. 1 Job., Rotor End Welding Key Making 1Job, Rotor sleeve turning and grinding 1 Job., Labour charges 1 Job |
| 5 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 12RewindingofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Neck ring 5 Nos., Sand Guard 1 No., Guide Bush 3 Nos. Distance Bush 3 Nos. Impeller Key 5 Nos., Epoxy Paint of Rotor. 1 Job., Rotor End Welding Key Making 1Job, Balancing of rotor 1 Job., Labour charges 1 Job |
| 6 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 17Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Neck Ring 6 Nos., Suction chamber 1 No., Guide Bush 6 Nos. Distance Bush 6 Nos. Impeller key 4 Nos., Balancing of Rotor. 1 Job., Rotor Sleeve Turning &Grinding 1Job, Balancing of rotor 1 Job., Labour charges 1 Job |
| 7 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 18Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos. Coupling Sleeve with key 1 No., Guide Bush 8 Nos. Neck ring 4 Nos., Distance Bush 8 Nos. Impeller Key 4 nos., Neck ring 8Nos., Stamping Repairing. 1 Job., Rotor Sleeve Turning &Grinding 1Job, Rotor end welding key way making 1 Job., Labour charges 1 Job |
| 8 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 24Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos. Coupling Sleeve with key 1 No., Guide Bush 4 Nos. Neck ring 4 Nos., Distance Bush 4 Nos. Impeller Key 5 nos., Stamping Repairing. 1 Job., Rotor Sleeve Turning &Grinding 1Job, Balancing of rotor 1 Job., Labour charges 1 Job |
| 9 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no28Rewinding ofMotor1 No, Water seal 2 Nos., Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Sand Guard 1 Nos., Guide Bush 6 Nos. Distance Bush 6 Nos. Neck ring 6 Nos., Stamping Repairing 1 Job., Rotor Sleeve Turning &Grinding 1Job, Epoxy paint of rotor 1 Job., Labour charges 1 Job |
| 10 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no30Rewinding ofMotor1 No, Water seal 2 Nos., Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Thrust Plate 1 No., Guide Bush 6 Nos. N.R.V. Body 1 No., Distance Bush 6 Nos. Motor base 1 No., Epoxy Paint of Rotor 1 Job., Rotor End Welding Key Making 1Job, Balancing of rotor 1 Job., Labour charges 1 Job |
| 11 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no48 Rewinding of Motor 1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Thrust Plate 1 No., Guide Bush 4 Nos. Distance Bush 4 Nos. Neck ring 4 Nos., Epoxy Paint of Rotor 1 Job., Rotor Sleeve Turning & Grinding 1 Job, Balancing of rotor 1 Job., Labour charges 1 Job |
| 12 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no60Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Sand Guard 1 Nos., Guide Bush 3 Nos. Distance Bush 3 Nos. Neck ring 7 Nos., Stamping Repairing 1 Job., Rotor Sleeve Turning &Grinding 1Job,Epoxy paint of rotor 1 Job., Balancing of rotor 1 Job., Labour charges 1 Job |
| 13 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no61 Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Connection plece 1 No., Thrust Plate 1 No., Neck ring 4 Nos., Rotor sleeve1 No. Sand guard 1 No., Guide Bush 5 Nos. Distance Bush 5 Nos. Balancing of rotor. 1 Job., Rotor End Welding Key Making 1Job, Labour charges 1 Job |
| 14 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no 63 Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Upper Bush 1 No., Thrust Bearing 1 No., Neck Ring 4 Nos. Sand guard 1 No., Guide Bush 7 Nos. Distance Bush 7 Nos. Impeller kay 5 Nos., S.A.T. Bearing. 1 Job., Rotor sleeve turning and grinding 1Job, Balancing of rotor 1 Job., Labour charges 1 Job |
| 15 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 64Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos. Neck ring 7 Nos., Coupling Sleeve with key 1 No., Guide Bush 9 Nos. Distance Bush 9 Nos. Impeller Key 4 nos., Stamping Repairing. 1 Job., Rotor Sleeve Turning &Grinding 1Job, Balancing of rotor 1 Job., Labour charges 1 Job |
| 16 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 66Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos. Coupling Sleeve with key 1 No., Guide Bush 6 Nos. Distance Bush 6 Nos. Impeller Key 4 nos., Neck ring 6 Nos., Stamping Repairing. 1 Job., Rotor Sleeve Turning &Grinding 1Job, Epoxy paint of rotor 1 Job., Labour charges 1 Job |
| 17 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no67Rewinding ofMotor1 No, Water seal 2 Nos., Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Neck ring 4 Nos., Sand Guard 1 Nos., Guide Bush 8 Nos. Distance Bush 8 Nos. Stamping Repairing 1 Job., Rotor Sleeve Turning &Grinding 1Job,Labour charges 1 Job |
| 18 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no69Rewinding ofMotor1 No, Water seal 2 Nos., Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Thrust Plate 1 No., Thrust Bearing 1 Job., Suction chamber 1 No., Neck ring 8 Nos., Guide Bush 9 Nos. Distance Bush 9 Nos. Epoxy Paint of Rotor 1 Job., Rotor End Welding Key Making 1Job, Balancing of rotor 1 Job., Labour charges 1 Job |
| 19 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set no70 Rewinding of Motor 1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Thrust Plate 1 No., Guide Bush 7 Nos. Neck ring 5 Nos., Distance Bush 7 Nos. Lower Housing 1 Job., Epoxy Paint of Rotor 1 Job., Rotor Sleeve Turning & Grinding 1 Job, Labour charges 1 Job |
| 20 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 75Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos., Thrust Plate 1 No., Guide Bush 8 Nos. Distance Bush 8 Nos. Thrust bearing 1 No., Rotor Sleeve Turning &Grinding 1Job, Balancing of rotor1 Job., Labour charges 1 Job |
| 21 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 76Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos. Thrust Bearing 1 No., Motor base 1 No., Guide Bush 3 Nos., Distance bush 3 Nos., Sand guard 1 No., Stamping Repairing. 1 Job., Rotor Sleeve Turning &Grinding 1Job, Epoxy paint of rotor 1 Job., Labour charges 1 Job |
| 22 | Repair Rewinding of 7.5 H.P. BS Make Sub. P/Set No. 80Rewinding ofMotor1 No, Cable 2.5 Sq. mm 3 Mtr. G.M. Bearing bush 4 Nos., Water Seal 2 Nos. Upper Bush 1 No., Guide Bush 6 Nos. Distance Bush 6 Nos. Balancing of Rotor. 1 Job., Rotor Sleeve Turning &Grinding 1Job, Impeller repairing 3 Job., Labour charges 1 Job |
AI Tender Summary
Tender Timeline
Jun 06, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 11, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender