Tender For M/O Completed Scheme Under Nazul A/C-Ii Hort.Zone.
Tender Value
12.79 Lakhs
Estimated cost
Bid Submission
17 Jun 2025
0 days left
EMD
25598
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
burari → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
M/O Completed Scheme Under Nazul A/C-Ii Hort.Zone. Supplying, Installation, Testing And Commissioning Of Sewage Submersible Pumps And Feeder Pillar Including All The Allied Accessories In Coronation Park Burari Under Hort. Zone.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jun-2025 | Corrigendum | Date | 17-Jun-2025 |
| 2 | 13-Jun-2025 | Extention of Date | Date | 16-Jun-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, Installation, Testing & Commissioning of Sewage treated water Submersible pump set duly coupled with suitable rating 3 phase, 415 Volts, 50 Hz, 3000 RPM Submersible Motor including providing and fixing of suitable strengthof 6 mtr. long G.I chain for lifting out the pump set from the UGR.The pump set shall be suitable for following duties:-(i) Discharge:1200 LPM to 400 LPM (ii) Head Range: 9 mtr. to 19 mtr. (iii) Capacity :- 5.5 H.P (Minimum) (iv) Solid handling capacity: 30 mm |
| 2 | Supplying, Installation, Testing & Commissioning of Sewage treated water Submersible pump set duly coupled with suitable rating 3 phase, 415 Volts, 50 Hz, 3000 RPM Submersible Motor including providing and fixing of suitable strengthof 6 mtr. long G.I chain for lifting out the pump set from the UGR.The pump set shall be suitable for following duties:-(i) Discharge:600 LPM to 100 LPM (ii) Head Range: 3 mtr. to 17 mtr. (iii) Capacity :- 3.0 H.P (Minimum) (iv) Solid handling capacity: 35 mm |
| 3 | Supplying of PVC Sheathed, PVC Insulated Copper conductor flat Submersible cable of followingsize including connection, testing etc. as reqd.(a) 1x3x2.5 sq. mm |
| 4 | Supplying & replacement of following size of double flanged GI pipe \"B\" class (ISI marked ) duly threaded & welded with necessary pipe fittings, bends, elbow etc. complete as reqd.a) 65mm dia. |
| 5 | c) 80 mm dia. |
| 6 | Supplying of following size of XLPE insulated & PVC sheathed, aluminum conductor armoured power cable of 1.1 kV grade, including connection testing etc. as reqd.a) 4 x 25sq mm. |
| 7 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. a) Upto 35 sq. mm |
| 8 | Supplying and laying of following sizeDWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming toIS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. a) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 9 | Supplying , installation, testing and commissioning ofcubical Panel/ Box of size of 400 mm x 400mm x 250 mm deepmade out of 2mm thick CRCA sheet and rain protection covers on all aroundit of about 75 mm and supported with of MS angle iron legs and bottom frame of size 35mm x 35mm x 5mm x 1mtr. long grouted with 1:3:6 CC foundation and should be 0.7 mtr. above ground level. Legs should be covered with brick walls, connections, inter connections with suitable size of FRLS PVC insulated copper conductor using thimbles wherever required,including supply and fixing of following accessories complete as required.(a)63 Amps. TP MCB (\"C\"-Series), 10kA----1 No.(b) DOL Starter, with Suitable relay range 9-21 Amp |
| 10 | Earthing with G.I earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 11 | Providing and fixing 25mm X 5mm G.I. strip on surface or in recess for connections etc. as required. |
| 12 | Supplying & replacemnt of following dia cast iron double flanged swing type non return valve as per IS 5312 (part 1&2) PN 1.0, body & disc : C.I , body ring: Bronze,hinge pin: AISI 410 testing etc. complete as required. a) 65mm |
| 13 | b) 80 mm dia. |
| 14 | Supply, fabrication of SS304 base frame for sewage submersible pump set for 5 HP capacity made out of 25x25x5 mm, SS304 angle iron of size 600x600x400 mm, covered with wiemesh made out of 25x5 angle iron and 8 SWG wire and arrangement for fixing complete as required. |
AI Tender Summary
Tender Timeline
Jun 16, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 17, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 16, 2025
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 17, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 18, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender