|
| 1 | Clearing and grubbing |
| 2 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(100 % of area excluding built-up/ semi built-up area) |
| 3 | Removing all types of Hume pipes and stacking within a lead of 1000m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 of Specification of Rural Roads. -600mm - 900mm dia |
| 4 | Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3.0m and lead upto 1000 m as per Technical Specification Clause 301.4. |
| 5 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. |
| 6 | GSB- Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401. |
| 7 | WBM Grading 2 : Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. |
| 8 | WBM Grading 3 : Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 9 | Prime Coat- Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 10 | Tack Coat- Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.. |
| 11 | Mix Seal Surfacing ; Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 |
| 12 | Hume Pipe- 1 x 1.00m Dia Pipe Culvert |
| 13 | Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 14 | Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 |
| 15 | Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i) |
| 16 | Laying GSB material below pipe |
| 17 | Stone Masonry Work in cement mortar in foundation of Head walls complete as per drawing and technical specification Clasue 1109 |
| 18 | Providing and laying reinforced cement concrete pipe NP3 (1000mm dia.) for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. |
| 19 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, retaing wall, breast wall etc. |
| 20 | Backfilling in foundation trenches as per drawing and technical specification Clause 1108 |
| 21 | Pointing on SM Work |
| 22 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces |
| 23 | Hume Pipe- 1 x 1.00m Dia Pipe Culvert (Catch pit , Guard wall & Step outlet) |
| 24 | Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 25 | Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 |
| 26 | Stone Masonry Work in cement mortar in foundation of Head walls complete as per drawing and technical specification Clasue 1109 |
| 27 | Hume Pipe- 2 x 1.00m Dia Pipe Culvert (Catch pit , Guard wall & Step outlet) |
| 28 | Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 29 | Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 |
| 30 | Stone Masonry Work in cement mortar in foundation of Head walls complete as per drawing and technical specification Clasue 1109 |
| 31 | RCC Slab Culvert- 3 m Span |
| 32 | Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 33 | Backfilling behind abutment, wing wall, return wall as per technical specification clause 1200 |
| 34 | Providing Concrete (M-10) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 1203 |
| 35 | Providing concrete for plain / reinforced concrete (PCC-M15) in open foundation complete as per drawing and technical specifications Clauses 802, 803, 1202 & 1203. |
| 36 | Providing concrete for plain / reinforced concrete (PCC-M15) in substructure complete as per drawing and technical specifications Clauses 802, 804, 805, 806, 807, 1202 & 1204. |
| 37 | Providing Concrete (M-25) for Plain/Reinforced Concrete in Superstructure complete for height upto 5 m as per drawing and Technical specification clause 802, 804, 805, 1202,& 1204 of specifiaction of Rural Roads including curing complete |
| 38 | Supplying, Fitting and Placing HYSD Bar Reinforcement in Superstructure including cost of Steel Material and carriage etc. complete as per Drawing and Technical Specification Clause 1002, 1005, 1010, and 1202 of Specification of Rural Roads |
| 39 | Providing Weep Holes in Brick masonry/ Stone masonry, Plain/ Reinforced concrete abument, wing wall, return wall with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V): 20 (H) towards drawing face complete as per drawing |
| 40 | Retaining Wall |
| 41 | Excavation in soil hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 meters. |
| 42 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plith level :- 1:3:6 (1 cement : 3 Coarse sand : 6 Graded stone aggregate 40 mm nominal size) |
| 43 | NET RRM (1:6 CM)-Providing and laying Random Rubble Stone masonry in cement morter 1:6 with bond stones through stone of size 150 mm x 150 mm manufactured in 1:4:8 (1 cement : 4 clean coarse sand and clean hand stone aggregate or 40mm and down) clean hard selected stone including centering, aligning and slopes/eaves etc. all complete as per Engineer-In-Charge. |
| 44 | NET RRM (DRY)-Providing and laying Hand packed wall with clean hard selected stone including centering, aligning and slopes curves etc. complete as per EngineeIn-Charge. |
| 45 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. |
| 46 | Breast Wall |
| 47 | Excavation in soil hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 meters. |
| 48 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plith level :- 1:3:6 (1 cement : 3 Coarse sand : 6 Graded stone aggregate 40 mm nominal size) |
| 49 | NET RRM (1:6 CM)-Providing and laying Random Rubble Stone masonry in cement morter 1:6 with bond stones through stone of size 150 mm x 150 mm manufactured in 1:4:8 (1 cement : 4 clean coarse sand and clean hand stone aggregate or 40mm and down) clean hard selected stone including centering, aligning and slopes/eaves etc. all complete as per Engineer-In-Charge. |
| 50 | NET RRM (DRY)-Providing and laying Hand packed wall with clean hard selected stone including centering, aligning and slopes curves etc. complete as per EngineeIn-Charge. |
| 51 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. |
| 52 | DRAINAGE WORKS |
| 53 | Lined Drain: Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. |
| 54 | Providing (M-15) for plain concrete complete as per drawing and technical specification |
| 55 | Plastering with cement mortar (1:4), 15 mm thick in drain as per technical specification Clauses |
| 56 | ROAD FURNITURE WORKS |
| 57 | (i) Logo Board at starting point (As per fig. 107 of Road signage under PMGSY published by the NRRDA on Dec\"06) |
| 58 | MIB |
| 59 | Citizen’s information Board |
| 60 | Construction of 5th Kilometre Stone (Precast) : Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 61 | Construction of Ordinary Kilometre Stone (Precast) :Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 62 | Construction of 200 Metre Stone (Precast) :Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 63 | ROAD SAFETY AND TRAFFIC SIGN WORKS |
| 64 | a) 600 mm Equilateral Triangle (Ref. Annexure 18.1) |
| 65 | b) 600 mm Circular (Ref. Annexure 18.1) |
| 66 | c) 900mm side octagon (Ref. Annexure 18.1) |
| 67 | d) 600 mm Square (Ref. Annexure 18.1) |
| 68 | Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New Work:- Painting lines, dashes, arrows, etc. on roads in two coatson new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 |
| 69 | Good and Service Tax (18%) |
| 70 | Five Years Maintenance |
| 71 | Maintenance for 1st Year |
| 72 | Maintenance for 2nd Year |
| 73 | Maintenance for 3rd Year |
| 74 | Maintenance for 4th Year |
| 75 | Maintenance for 5th Year |
