Tender For Renovation Of Different M.I. Schemes Under 48 Karamcherra St Constituency Within The Jurisdiction Of Wr Sub Division Manu During The Year 2025 26 S.H Annual Repairing Of Pump Motor Suction Delivery Electrical Equipments Etc., Karamcherra-Tripura

Renovation Of Different M.I. Schemes Under 48 Karamcherra St Constituency Within The Jurisdiction Of Wr Sub Division Manu During The Year 2025 26 S.H Annual Repairing Of Pump Motor Suction Delivery Electrical Equipments Etc.-Dismental of horizontal pump and motor of 20/25 HP from the base and carrying the pump set to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme andfitting fixing the pump set as before as per direction of the Engineer-in-charge. 2 Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm ɸ 3 Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm ɸ 4 Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer-in-charge 5 125 mm dia 6 150 mm dia 7 Providing and fixing G.I. pipes of heavy class as per I.S. 1239 with latest amendment complete with G.I. fittings i/c trenching refilling cutting and making good the walls etc. complete as per chapter 20of CPWD specification and direction of the Engineer-in -Charge. A. External work 8 125 mm dia nominal bore(medium) 9 150 mm dia nominal bore(medium) 10 Providing and fixing G.I. pipes medium class as per IS : 1239with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer- in - charge,A. External work,i. 40 mm dia. nominal bore- For Priming line 11 Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge. 12 Providing and fixing 40 mm dia following fittings as per direction of the Engineer in Charge. 13 a) Full way valve (Brass make) 14 b) Union joint (GI) 15 c) Elbow (GI) 16 d) Tee (GI) 17 Providing & fitting fixing C.I. foot valve spare parts of 125/150 mm dia at site of work of approved quality. 18 a) C.I foot valve weight 19 b) C.I. foot valve ring 20 c) C.I. foot valve net 21 Providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality. 150 mm dia 22 Labour charge for lifting of hose pipe from river bad by dismantling of G.I. suction line and refitting the same after cleaning the pipe with necessary filling etc. complete as per direction of the Engineer in charge. 23 Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. 24 150 mm dia 25 125mm dia 26 Providing & fitting fixing of MS flange (8 mm wall thickness) by welding with G.I. / MS pipe and placing in position as per specification and the direction of the Engineer-in-charge. 27 150 mm dia 28 125mm dia 29 Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality. 150 mm dia 30 Providing and fixing MS bolts including nuts and washers complete as per standard design:- Above 300mm length.- 31 Providing & fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in-charge. 32 Providing & fitting fixing C.I tail piece of approved quality at site of work., 150 mm dia 33 Providing & fitting fixing MS Foot Valve as per relevant IS specification and direction of the Engineer-in-charge. 34 Labour charge for checking the panal board and making safe including dismantling and refitting fixing of wire and electrical equipments and reconstruction etc complete as per direction of the engineer in charge. 35 Supplying & fitting fixing manually operated oil immerged starter of approved quality. 30 Hp Osco/BCH Make 36 Providing & fixing 200 Amps busber of size 600x450x100 mm with 4 nos copper strip of size 450x40x4 mm of approved quality. 37 Repairing of Osco starter including supplying & fixing of necessary spare parts as per direction of Engg-in-charge. 38 Stand finger 39 Gola finger 40 CT Coil 41 Magnet Coil 42 Circuit board for Osco starter of Backelite make 43 Repairing charge of busber including changing of copper strip with neccesary screws,nuts, washer including proper reconnection and wiring etc. complete as per direction of the engineer in charge. 44 Labour charge for dismentling of 200-A main switch and refitting fixing the same after repairing i.e. Chanding of H.R.C fuse, cutout, connecting rod, backlite plate, finger, insulated iron, handle i.e as require and making good as per direction of the Engineer-in-charge. 45 Repairing of 63 amps sub-main switch providing all kit kat and kit kat base and repair where necessary in/c fitting fixing and testing complete. 46 Dismentaling of pump for overhauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs.in two spell complete as per direction of the Engineer-in-charge. For LI 47 Providing & fitting fixing Pump Shaft of approved quality 48 Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump 49 Providing & fitting fixing coupling/ impeller Key of approved quality.Stainless Steel 50 Providing & fitting fixing Casing ring of approved quality 150 mm dia 10 mm thick 51 Providing & fitting fixing C.I. gland of approved quality For LI 52 Supply & fitting fixing ball bearing of approved quality for pump required during overhauling. 53 6305 Ball bearing (TATA /SKF) 54 6306 Ball bearing (TATA /SKF) 55 6307 Ball bearing (TATA /SKF) 56 6308 Ball bearing (TATA /SKF) 57 6309 Ball bearing (TATA /SKF) 58 6310 Ball bearing (TATA /SKF) 59 Reparing of 125 mm dia sluice valve by dismentling in/c changing of sluice valve spindle, key, gasket, nuts and bolts etc. and refitting fixing the same after making good in the exisitng delivery line as per direction of the Engineer in charge. 60 Labour charge for dismentling of 125 mm dia non-return valve and refitting fixing the same after proper washing and ressemling the C.I seperator plate etc as per direction of the engineer in charge. 61 Repairing of pump shaft by welding, polishing etc complete as per direction of the Engg-in-Charge. 62 Labour charge for dismantling, turning making alignment of pump motor shaft for suitable fitting coupling,bearing,sleeve bush etc as per direction of the Engg-in-Charge. 63 Repairing of impeller by welding, polishing etc complete as per direction of the Engg-in-Charge. 64 Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. 150 mm dia 65 Providing & fitting fixing coupling nuts & bolts (all Size) of approved quality. For LI 66 Providing & fitting fixing coupling rubber bush (All Size) of approved quality. For LI 67 Providing & fitting fixing coupling star bush (All Size) of approved quality. 150 mm dia 68 Providingand fitting fixing shaft sleave bushof approved qualityFor LI Cast Iron (CI) 69 Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge 70 Supplying and greasing/applying of grease of approved quality as per direction of Engineer-in-charge. 71 Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge. 72 6 to 8 mm thick 73 10 to 12 mm thick 74 Supplying & filling of Transformer oil in the tank of manually operated oil immerged starter of approved quality. 75 Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge. 76 Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuses) triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havels / BCH make etc. complete as per specification and direction of the Engineer-in-Charge. 77 ii) 63 amps. 78 iv) 200 amps 79 Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter (L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. 80 Providing and fitting fixing of moving iron type, Range 0-100/0-200 amps,96 mm x 96 mm size AC Amps meter direct reading type (L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. 81 Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc.complete (ISI Marked) on the pannel board of approved quality. 7/16 Copper Wire

INR 1000 /-

INR 13578.0 /-

INR 6.78 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB