Tender For Electromechanical And Repairing Maintenance Work At Old Filter Plant Near Chambleshwar Dam Manasa
Tender Value
45.63 Lakhs
Estimated cost
Bid Submission
05 Jul 2025
0 days left
EMD
34300
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
manasa → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Electromechanical And Repairing Maintenance Work At Old Filter Plant Near Chambleshwar Dam Manasa
BOQ
| Sl. No. | Item Description |
| 1 | Sluice Gate Square type as per IS 13349, Size 600X600 mm. Cast Iron Wall Thimble mounted,Manually operated,CL-PL : Meter,Class – I, Flush Bottom Closure. |
| 2 | Providing, Laying & ,Jointing (i/c all jointing material) & testing of welded/Socketed double flanged centrifugal cast (spun) ductile Iron pressure pipes conforming to IS:8329/2000 in the length of 5 m. for class K-9 with inside cement mortar lining for the sizes/dia pipes. 200 MM |
| 3 | Providing, Laying & ,Jointing (i/c all jointing material) & testing of welded/Socketed double flanged centrifugal cast (spun) ductile Iron pressure pipes conforming to IS:8329/2000 in the length of 2 m. for class K-9 with inside cement mortar lining for the sizes/dia pipes. 200 MM |
| 4 | Providing & fixing of following Ductile iron double flanged sluice valves glandless, resililent (soft seated) non-rising spindle with body bonnet of ductile iron of grade GGG 40/SGI 400/12 or equivalaent grade or of higher tensile strength grade, as per IS: 3896 part-II-1986 and subsequent revision, wedge fully rubber lined with EPDM food grade quality and seals of NBR. The valve should be with replaceable nut and replaceable sliding shoes, valve stems shall be of single piece thread rolled. Sluice valve shall be compitable for buried applications without valve chambers. The valve should be vaccum tight and 100% leakproof with face to face dimensions as BS: 5163-89/ IS: 14846/2000/DIN 3204 F4 and flange connections as per IS: 1538. Valve should be with electrostatic powder coatilng both inside and outside (thickness 250 micron)with pocketless strailght thro body passage including jointing and testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete.100 MM Dia |
| 5 | 150MM Dia |
| 6 | 200 MM Dia |
| 7 | Providing & fixing cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts, nuts and rubber insertion all complete. 150MM Dia |
| 8 | Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Horizontal Centrifugal Split Casing pumps with motor, CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification. FOR 200kw POWER (268 hp) and discharge discharge 340cum/hr and head 125 m |
| 9 | Supply of approved HighTension XLPE cable 11 kV grade as per ISI standard 3 core Armoured with Alu. Solid/stranded conductor ISI MARKED as required. XLPE CABLE 11 KV GRADE 50 Sq.mm |
| 10 | Providing and erecting expoxy resin and termination/joint for low tension P.V.C./ XPLE insulated cable of 1100 Volt grade complete with cable jointing compound, Harner, Plastic mould adhesive cum solvent expoxy putty, spacer, tapes etc. as per I.S. specification 8438. 1977 forcableduty erected on existing pole/support/switchgears andconnection to supply for all core cable as under.id/od epoxy resin end termination 150-300 sqmm2 / 3 / 3½ / 4core |
| 11 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) PE 100 (PN 6) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed). 160MM 10KG |
| 12 | Fittings Electrofusion Lumpsum @ 10% |
| 13 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central, state & municipal, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. complete. Coupler |
| 14 | Tees |
| 15 | Bend |
| 16 | Providing and laying in position Plain cement concrete (PC) of specified grade excluding the cost of centering and shuttering. In walls and superstructure up to 4 meter. height above plinth(with 20mm nominal graded metal) excluding the cost of centering shuttering. Cement concrete grade M-25 (Design Mix) with 20 mm maximumsize of stone aggregate |
| 17 | Providing, Laying & Jointing (i/c all jointing material) & testing of welded/Socketed double flanged centrifugal cast (spun) ductile Iron pressure pipes conforming to IS:8329/2000 in the length of 3m. for class K-9 with inside cement mortar lining for the sizes/dia pipes.100mm dia |
| 18 | 150mm dia. |
| 19 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.)including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed. earth to be levelled and neatly dressed.All ordinary work |
| 20 | Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundationsetc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum |
| 21 | HWE Flash Mixer mechanism consisting of TEFC squirrel cage induction motor with SS304 shaft, SS304 impeller, reduction gear mechanism, support spanning the tank, anchor bolts, paddles,guide bearings and supporting M S clamp. |
| 22 | HWE SS304 fabricated Alum / Lime Agitator with reduction gear and suitable H.P. TEFC motor. |
| 23 | HWETwinLobeRotarypositive displacement type Air Blower, air cooled model with M.S. fabricated base plate, Suction Filter, Suction Silencer, Safety valve, vee belts and vee belt pulley for motor , capacity 375 m3/hr. at a pressure of 0.35Kg/cm2, suction and dischargesilencers with 10 H.P. electric motor. |
| 24 | HWE PGM Gaseous Chlorinator comprising of the following:-(a) Primary Filter with moisture tube.(b) Chlorine Pressure Gauge.(c) Flow control valve.(d) Connecting tube from primary filter to secondary filter.(e) Secondary filter with moisture tube and non return valve.(f) Delivery tube from secondary filter to Flow Indicator with non return valve.(g) Rate of Flow indicator cum mixing unit.(h) Delivery tube for flow Indicator to Solutionizer.(i) Solutionizer.(j) Non corrosive Panel board for arranging all the above units.(k) Interconnection valves and tee for connection of water supply line to Chlorinator.(l) Copper tube for connection to Gas Cylinder – 5 ft.(m) Set of tools and washers etc.Gravity feed type capacity 1 Kg/hr. |
| 25 | 100 Kg filled chlorine cylinder with test certificate and filling permission. |
| 26 | HWE Vertical type Flocculator consisting of MS Paddles mounted on supporting frame over a vertical shaft operated by suitable H.P. TEFC 440VAC electric motor through a set of helical gears and reduction gear. |
| 27 | 1 ton chain pulley block with geared trolley. |
| 28 | Removal of old filter media and supply of new filter media on the plant |
| 29 | Electric Control Pannel |
| 30 | Supply and installation of chain link conveyor mechanism at filter plant (chain link kuppi) of capacity 5 tonn |
AI Tender Summary
Tender Timeline
Jun 05, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 05, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 07, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender