Tender For Quaiserbagh Churahe Rotary Ke Beautification And Development Work Phase 3 - Demolishing Brick work Manually/ by mechanical means Including Stacking of Serviceable material and disposal of unseviceable material within 50 metres lead as per direction of Engineer -in-charge.Cement Mortar (DSR-2021/15.7.4) 2 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.Note item to be applicable in urban areas having directions for restricted hours for movement/ plying of load-carrying motor vehicle of 3.5 cum or more. (DSR-2021/15.60) 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the as per (DSR-2021/2.6) 4 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(DSR-2021/4.1.5) 5 Plain/Reinforced cement concrete,in well foundation complete as per drawing and technical specificationRCC Grade M20 using batching plant & manual placing (DSR-2021/5.1.2) 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (MORTH) 7 Plain/Reinforced cement concrete,in well foundation complete as per drawing and technical specificationPCC Grade M20 using batching plant & manual placing (DSR-2021/4.1.2) 8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 9 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) (DSR-2021/13.82.2) 10 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (MORTH-4.01) 11 Providing, laying and spreading of graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% OPC cement and 3.50% Emulsion in uniform single layer on sub base/subgrade and compacting with the road roller to achieve the desire density (MORTH-4.14) 12 Providing and applying prime coat with SS-2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. (MORTH-5.01) 13 Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (MORTH-5.02) 14 Providing and laying dense graded bituminous macadam with higher capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (MORTH-5.04) 15 Providing and laying bituminous concrete withhigher capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (MORTH-5.1) 16 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per som area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35-2015 The finished surface to be level, uniform and free from streaks and holes.(MORTH-803(8.13) - Base 17 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67 upto date made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with PCC M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 upto date. Legends , letters , numerals and borders etc should be as per MoRTH specification No-801.3.7 . Proof of the same in form of government report shall be uploaded while quoting tender. MoRTH- 801 (8.4 18 (a) 60 cm circular with definition plate (20cm X 60cm) 19 (b) 60 cm equilateral triangle with definition plate (20cm X 60cm) 20 (c) 30X90 cm (Left/Right) Object Hazard 21 (d) 60 mm x 45 mm rectangular with diffinitation plate (20cm X 60cm) 22 Aluminum-backed flexible prismatic sheeting shall be made of yellow colored flexible prismatic sheeting with non-metallic prismatic lens formed in a transparent, synthetic resin as retro reflective elements. This flexible prismatic sheeting shall have black and yellow stripes with aluminum backed flexible prismatic Type VI sheeting conforming to ASTM: D4956 . specifications and standards of coefficient of retro reflectivity, flexibility and impact resistance applicable for reboundable devices. This flexible prismatic sheeting shall have screen printed arrow/slant line pattern in black colour in a continuous roll format. Width of object marker shall be 300 mm.The rate shall include all materials, labour, T&P, transportation,installation and incidentals all complete as per direction of the Engineer-in-Charge.(IRC:SP-55- 2014) 23 Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per Clause 408.(MoRTH- 804 (8.1) 24 Construction of K.C. Drain with 1:2:4 C.C. including 100 mm thick base concrete of 1:4:8 cement fine sand & 40 mm nominal size O.B.B. and also including earth work in excavation in proper slop & Camber. Including all labour, T & P etc. required for proper completion of work. (by Analysis) 25 View cutter Jali in Cement Concrete. (M/R) 26 Stone Bollards (M/R) 27 Pink Stone Round grooved planter (M/R) 28 Pink Stone Textured Cylindrical planter (M/R) 29 Sculpture as per Specifiations approved by Architect in charge (M/R) 30 Supply and laying of 10.00 Sqmm 4 Core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (M/R) 31 Supply and laying of 25.00 Sqmm 3.5 Core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (M/R) 32 Supply and laying of 70.00 Sqmm 3.5 Core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (M/R) 33 Supplying and laying of following 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.(DSR-2021/10.17) 34 IInground walk over fitting.12WATTS Recessing depth 175 mm. Dia 180 MM IP rating IP 67 ,Min 1200 Lumes ,MATERIAL CHARACTERISTICS ,Aluminium die cast housing . 3 mm thick front trim in Stainless Steel - Grade AISI 316L . A4 grade Stainless Steel screrws. Pre treated Silicone Gaskets. Salt spray 500 Hrs .PMMA reflector Mechanical resistance IK 09. Maximum load capacity 500 Kg.Lifetime 50K hrs (ta 35°C) @L70B50 .working temperature range -40℃to +50℃CRI <70 . Connector housed inside the recessing box . The device is complete with 240V÷24V power supply, controllable and programmable according to DMX RGB standards. . Isolation: CLASS I . Available colours: Stainless steel (cod.19). Glow Wire test: 750°C L.E.D circuit included.240 V ACCertifications :- CE/CB/EMCModel:- Uni In Ground 12 watt 3000K Make Ligman/ Unilamp/Disano/ Philips (M/R) 35 Supply and Fixing of Spike Light for trees 12 watt Warm White. (Including civil works) (M/R) 36 Supply and fixing of LED Bollard robustly designed IP65/IK10 Bollard is easy to install with base plate(BCP150 LED /NWPSU 220-240V 7043)(Philips/Panasonic/Havells or Equivalent) (M/R)
