|
| 1 | PART - A \"Civil works\" Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m |
| 2 | PART - A \"Civil works\"Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. soft rock withoutblasting upto 1.5 m depth |
| 3 | PART - A \"Civil works\" Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm and down size graded crushed coarse aggregates. |
| 4 | PART - A \"Civil works\" Providing and laying in position Cement Concrete for all Foundation works below plinth beam. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, including providing fixing and removing shuttering, scaffolding, staging etc, including cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm and down size gradedcrushed coarse aggregates. Note: Quoted rate shall include all the cost of shuttering, scaffolding, staging etc, and no seperate payment shall be made for the same. |
| 5 | PART - A \"Civil works\"Providing and laying in position Cement Concrete for all Plinth beam works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, including providing fixing and removing shuttering, scaffolding, staging etc, cost of all materials, quality confirming to the requirements ofrelevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm and down size gradedcrushed coarse aggregates.Note: Quoted rate shall include all the cost of shuttering, scaffolding, staging etc, and no seperate payment shall be made for the same |
| 6 | PART - A \"Civil works\" Providing and laying in position Cement Concrete for all Super structures of building, road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates. Note : Quoted rate shall include all the cost of shuttering, scaffolding, staging etc and no seperate payment shall be made for the same. |
| 7 | PART - A \"Civil works\"Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification |
| 8 | PART - A \"Civil works\"Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming andwateringas directed by Engineer-In-charge. |
| 9 | PART - A \"Civil works\"Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and as directed by Engineer-In-charge. |
| 10 | PART - A \"Civil works\" Providing and laying65 to 100mm size granite soling stones of approved quality & size for flooring base including preparation of base properly by leveling dressing & hand ramming using hand rammer with watering, providing & filling interstices using small sized stones / chips, providing & spreading binding materials such as murrum / gravel with proper watering, collecting & disposing the generated waste,from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing and as directed by Engineer-in-charge at all locations & lifts. |
| 11 | PART - A \"Civil works\"Providing and laying factory made Precast concrete solid blocks of grade M10 made of C&D waste constructed with CM 1:6 as per IS 2572:2005,including cost of all materials, labour, scaffolding and usage charges of machineries & other incidental charges complete as per the direction of engineer incharge of work. |
| 12 | PART - A \"Civil works\" Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes andsizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. |
| 13 | PART - A \"Civil works\" Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. |
| 14 | PART - A \"Civil works\"Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includingcost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Ceiling Plaster) |
| 15 | PART - A \"Civil works\" Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:5 (1 cement: 5 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 16 | PART - A \"Civil works\"Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:4 (1 cement : 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 17 | PART - A \"Civil works\"Providing and fixing pressed steel door frames of size 125 x 60mm conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. |
| 18 | PART - A \"Civil works\"Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.30 mm thick both side commercial. |
| 19 | PART - A \"Civil works\"Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge.(Fixtures shall be paid for separately) Size 62 x 100mm |
| 20 | PART - A \"Civil works\" Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.with both side prelam |
| 21 | PART - A \"Civil works\"Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. |
| 22 | PART - A \"Civil works \"Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to steel windows by welding |
| 23 | PART - A \"Civil works\"Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage Charges of machinery complete as per specifications. |
| 24 | PART - A Civil worksProviding & fixingglass panes with putty and glazing clips in steel/alluminum doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Tinted) |
| 25 | PART - A \"Civil works\" Providing and laying vitrified floor tiles of size 600mm x600mm with thickness 9-10 mm insize with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Basic rate of tiles shall not be less than Rs.500/- per Sqm(Including GST) |
| 26 | PART - A \"Civil works\" Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approvedmake and size including cost of materials, labour, complete as per specifications. |
| 27 | PART - A \"Civil works \"Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well ascurvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. |
| 28 | PART - A \"Civil works\"Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer-in-charge. |
| 29 | PART - A \"Civil works\"Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 30 | PART - A \"Civil works\"Embossing / Engraving the title of the project in Kannada Script and“NPCIL LOGO \" of standard size & shape [to suit structure] on the external plastered surface of the building by using CM 1:3 and painting the same over a Coat of exterior grade primer in contrast with wall Colour.The alphabets of the script and the logo shall be very neat clean and print like finish. The hight of the alphabets shall be 6\"\" to 8\"\" and logo shall be in a Square frame of 1.5 feet. The script and the logo shall be traced on the plastered surface with \"computer printed template cut-out \" to get the title very neat clean and print like finish including preparation of base, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing, as per site requirement and as directed by Engineer-in-charge at all locations & heights. |
| 31 | PART - A \"Civil works\"Providing and painting the title of the project in Kannada Script and \"NPCIL LOGO\" using approved paint and shade on the plastered surface of the internal wall of the building by professional painter. The alphabets of the script and the logo shall be very neat clean and print like finish. The hight of the alphabets shall be 6\"\" to 8\"\" and logo shall be in a Square frame of 1.5 feet side including preparation of base, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing, as per site requirement and as directed by Engineer-in-charge at all locations & heights. |
| 32 | PART - A \"Civil works\" Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. |
| 33 | PART - A \"Civil works\"Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. |
| 34 | PART - A \"Civil works\"Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. |
| 35 | PART - A \"Civil works\"Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
| 36 | PART - A \"Civil works\" Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. |
| 37 | PART - A \"Civil works\" Providing , layingandfixingPUFF sheet of 30mm for roof panel baby ribbed finish on inner and outer in plain colour coated Galvalume sheet with free polyutherene foam as the core is ijected between two sheets with highly sophisticated computer controlled foaming machine.Thickness of top sheet should be 0.45mm+/-0.05% as per ISI standard. Thickness of bottom sheet should be 0.35mm+/-0.05% as per ISI standard.Colour of top sheet should be brick red and bottom sheet off white.The density of puff should be 40+/-kg/cm3confirming to the relavent BIS specification of the latest edition and of approved make, providing, fixingrequired\"J\" bolts,self threading screws/bolts etc & providing andremoving Staging / platform,at all leads & lifts/heights etc complete, as per attached techanical specificationand as directed by the Engineer-in-Charge. |
| 38 | PART - A \"Civil works\"Proving and fixing mirror polished Inaugural board of Lacared granite stone of 18 to 20 mm thickness in approved size& shape and quality printed with Computerized Script & \"NPCIL LOGO\" etc.,Inaugural board shall be fixed firmely on the surface of the structure as directed including preparation of base, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing, as per site requirement and as directed by Engineer-in-charge at all locations & heights. |
| 39 | PART-B \"Water Supply and Sanitary works\"Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 40 | PART-B \"Water Supply and Sanitary works\"Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 41 | PART-B \"Water Supply and Sanitary works\"Providing and fixing PVC Pipe 110mm outer dia at 2kg per Sqcm.for down comer of rain water. |
| 42 | PART-B \"Water Supply and Sanitary works\"Providing and fixing15 NB, Brass, Clutch Head,Bib tap weight of each shall not be less than 600 grams with all its required accessories and ensuring smooth functioning includingproviding; fixing & removing necessary staging / platform,collecting and disposing the generated waste & cleaning the work area etc., complete all as per standard technical specification, manufacturer\"s technical specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. |
| 43 | PART-B \"Water Supply and Sanitary works\"Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.with all its required accessories and ensuring smooth functioning includingproviding; fixing & removing necessary staging / platform,collecting and disposing the generated waste & cleaning the work area etc., complete all as per standard technical specification, manufacturer\"s technical specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. |
| 44 | PART-B \"Water Supply and Sanitary works\"Providing and fixing15 NB, \"Stop Cock\"weight of each shall not be less than 450 grams. with all its required accessories and ensuring smooth functioning including providing, fixing & removing necessary staging / platform, collecting and disposing the generated waste & cleaning the work area etc., complete all as per standard technical specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. |
| 45 | PART-B \"Water Supply and Sanitary works\"Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm dia Ball Valves |
| 46 | PART-B \"Water Supply and Sanitary works\"Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and makingecessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 47 | PART-B \"Water Supply and Sanitary works\"Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 48 | 15 mm |
| 49 | 20 mm |
| 50 | 25 mm |
| 51 | PART-B \"Water Supply and Sanitary works\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 52 | 15 mm |
| 53 | 20 mm |
| 54 | 25 mm |
| 55 | PART-B \"Water Supply and Sanitary works\"Providing and fixing Sewer PVC (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 56 | 75mm nominal dia pipes |
| 57 | 110mm nominal dia pipes |
| 58 | 150mm nominal dia pipes |
| 59 | PART-B \"Water Supply and Sanitary works\"Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 60 | PART-B \"Water Supply and Sanitary works\"Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete |
| 61 | PART-B \"Water Supply and Sanitary works\"Providing and fixing NP2 Class, Pre-Cast RCC, Septic Tank of size 2.50 meter long & 1.20 meter outer dia., including necessary excavation[Size of pit shall be 3.50 mete (L) X 2.20 meter (W) X 1.80 meter (D) in in all sorts of soil, including laying bed PCC 1:4:8 of 100 mm thick using 40 mm down size stone aggregates at bottom of Precast RCC Septic Tank] includingloading, carriage, unloading, lowering [without damaging the RCC Septic Tank] in the pit, alighining [to true line & level / slope etc.]; finishing smooth; ensuring smooth functioning & back filling the sides [as directed] etc.,providing; fixing & removing necessary staging / platform, collecting and disposing the generated waste & cleaning the work area etc., complete all as per standard technical specification, manufacturer\"s technical specification and as directed by the Engineer-in-charge at all locations and at all lifts. |
| 62 | PART-B \"Water Supply and Sanitary works\"Providing and fixing Towel rail (Rectangular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- ClassEconomy |
| 63 | PART-B \"Water Supply and Sanitary works\"Providing and fixing Robe hook twin made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy |
| 64 | PART - C\"Electricals\"Supply and laying of O.D.20/25 mm of corrugated PVC rigid/flexible conduits in concealed fashion at Ceiling, column and wall with necessary wire pulling or inspection JB, bends etc along with one run of steel wire. All civil works related to wiring installation such as chasing of walls for embedding PVC conduits and necessary rough plastering should be part of the laying work. The corrugated PVC conduit shallISIapprovedmake. Theitemsampleshallbeshowntoengineerin-chargeandgetapprovedbeforebulk.Allaccessoriesandconsumablesrequiredforinstallationareinthescopeofcontractortocomplete thejobinallrespect. |
| 65 | PART - C\"Electricals\"Supply and pulling of wire for light/ fan points: Supply and Pulling of concealed 20/25mm corrugated PVC rigid/flexibleConduit and wiring for light points, wired from modular switch control with 3Run of 1.5sqmm PVC insulated copper conductor wire as Phase, Neutral and earth for each fitting taken in 20/25mm PVC pipe complete with accessories. All civil works related to wiring installation such as chasing of walls for embedding PVC conduits and necessary rough plastering should be part of the wiring work. Every junction an inspection JB with cover must be provided.The3coreX 0.75sq.mmcopperflexiblecablefor connectionof LEDfixturesandfans.Thelightingaccessoriessuchasceilingrose,angle/batten holders andrequiredcopperlugsareincontractorsscope.AllwiresareofPVC insulated 650/ 1100 volt grade,copperconductor,multi stranded wireconfirmingtolatestIS:694.All as instructed by the engineer in-charge. The maker of switch, angle holder, adopter, ceiling rose should BIS approved. |
| 66 | PART - C\"Electricals\"Supply, Installation and wiring for 6/16 amps, twin socketofmodular switch board with the connections. Switch board cover in item no 5 .All as instructed by the engineer in charge |
| 67 | PART - C\"Electricals\"Supply and pulling ofwiring for lighting/power circuits :Wire shall PVCinsulated650/1100Vgrade,copperconductor, multistrandedwireconfirmingtolatestIS: 694. Thecolourcodeof wiresforphaseshallberedandblackfor neutral.Theearthwireshallbeofgreencolourto be laid ininstalledPVCconcealedconduit.Therequiredconsumables to completethejob ofpulling wiresareinthescopeofcontractor. |
| 68 | PART - C\"Electricals\"Supply &pullingof 3 run of Wire of (2 run of 2.5 sq mm for Phase and neutral and 1 run of 1.5 sq mm for earth) Thewiresshallbepulledfor mainsupplyfrommeterboardtomainswitchboards and looping. |
| 69 | PART - C\"Electricals\"Supply &pullingof 3 run of Wire of (3run of 1.5 sq mm for Phase and neutral and 1 run of 1.5 sq mm for earth)Thewiresshallbepulledfor mainsupplyfromSwitch boardto10 A switch socket looping and Lighting boards. |
| 70 | PART - C\"Electricals\"Supply and installation ofGI Metal box 18 SWG for concealed wiring for fixingmodular switches including base frame and cover plate as per technical specification. All civil works related to wiring installatin such as chasing of walls for embedding PVC conduitsand necessary rough plasteringshould be part of the wiring work. |
| 71 | PART - C\"Electricals\"Providing and fixing of GISize 79x130 - 230x52mm concealed boxes with base frame. |
| 72 | PART - C\"Electricals\"Providing and fixing of GISize 79x75x46 mm concealed boxes with base frame. |
| 73 | PART - C\"Electricals\"Supply and installation of fan : The make of the fan shall BIS approved.Theitemsampleshallbeshowntoengineerin-chargeandgetapprovedbeforebulksupply. |
| 74 | PART - C\"Electricals\"Supply and installation of ceilingfan1200mm.sweep,300-375rpm,230 V, 1 Ph, 50 Hz, AC,browncolour,along with its accessoriesItemalso includessupply of electronic,steptype,white colour fanregulators andinstallingthemonModular switch board. |
| 75 | PART - C\"Electricals\"Supply and installation ofExhaustfan300mm dia/ sweep,browncolour. 230 V, 1 Ph, 50 Hz, AC.Also supply of SS Wire mesh guard for back and opening.Installation work includes assembling, fixing at wall with anchor fasteners and making all the connections including earth connection.Make should BIS approved. |
| 76 | PART - C\"Electricals\"Supplyand InstallationofLED fixturesincludingallaccessorieswith all connections made up to connector.Thefixtures shallbeinstalledon the wall/ceilingbyusingtwonumberPVC round block and6mmcoachscrewforfixing. Necessaryconnectionshasto bemade andfittingsshall beconnectedbyusingadaptorwith3Cx0.5Sq.mmPVCinsulated,PVCsheathed,copperconductorcable fromnearestceilingrose/angleholder.(The angle/ pendent holder is covered in item no.2). All as instructed by the engineer in charge and technical specification |
| 77 | PART - C\"Electricals\"Supplyand Installationof 1 x 4ft x 22/20watt, cool day white,Batten Type ,LEDfixtures includingallaccessorieswith all connections made up to connector. |
| 78 | PART - C\"Electricals\"Supplyand Installationof7watt,LED(Light emitting Diode) lamp, cool day white. Base B22, Lumen 600, non dimmable, lifetime 15000 hrs with warranty 2 years. |
| 79 | PART - C\"Electricals\"Supply and installation of LED type flood light of 50 W, IP65 Water proof fitting.100 lumens/Watt. Size 188 x 216 x 62 mm (LxBxH) appx. |
| 80 | PART - C\"Electricals\"Supplyandinstallationofplatetypeearthpit(Confirmingto BIS : 3043)with 600mm x600mmx 6.3mmG.I.plate includingallrequireditemssuchassalt,charcoaletc,. Theearthpitshallbeof2.5 meterdeepexcavated in alltype ofsoil. Theplateshallbeplacedatcentreofpitandshall becoveredwith alternatelayerofsaltandcharcoal. Two number of 50mm x 6mm G.I. flat shallbeweldedtothe plateandbroughtuptothetopofpit.40mm of medium class G.I.pipewithfunnelshallbe provided to the fulldepthofpitforwatering. Amasonrychamberof450mmx450mm(frominside)with50mmthickRCCcoverwithliftinghookshallbeprovidedforearthpit.A G.Iwireof8SWGshallbeconnectedfrom earthpittometerboard.Alltheitemstocompletethejobinallrespectisincontractorsscope. |
| 81 | PART - C\"Electricals\"Supplyandprovidingcatnaryserviceconnectionbyusing4.0sq.mm,2runofpvcinsulated,pvcsheathed (CTS),aluminiumstranded conductor/wire,1100 V,grade,reelinsulatorand10SWGG.Iwire.TherequiredaccessoriessuchasGIwire,hardwares,bindingwire,reelinsulatorsetctocompletethejobinallrespectisincontractors scope. |
| 82 | PART - C\"Electricals\"Supplyandinstallation ofmetal meterboard (size 45cmx30 cm appx), installedwithonenumber63ampsfuseunit,onenumberDP,63amps,30mAsensitivity ELCB(RCCB) 415V. The termination /connectionof incoming powerservicefrompoleto DB & meterboardincludingearthconnectionshallbedoneby contractor.TherequiredaccessoriessuchasGIpipe,GIwire,hardwares,GIclampsetc.,tocompletethe jobinallrespectisincontractorsscope. |
| 83 | PART - C\"Electricals\"Supply and installation of single phase MCB DB 8 Way,-1 No.The DB Consisting of 1 No DP 25 Amp,, 415 V, MCB and 4 numbers of10 amps, single pole MCB\"s with concealed mountingtype metalenclosure DB. And supply of cable end box 6 way (2 nos) concealed mounting type. The DB shall mount on concealed fashion and the required hardware’s and wall chasing and finishing are in contractors scope.All Lighting Circuit MCB shall connect to change over switch MCB. |
| 84 | PART - C\"Electricals\"Supply and installation of Plastic cable end box in concealed mounting fashion forcable end. The required hardwares and wall chasing and finishing are in contractor’s scope. |
| 85 | GENERAL NOTE FOR ABOVE ITEMS.1]workshallbeexecutedasspecifiedintheeachitemdescriptionandasdirectedbythe Engineer-in-charge. 2]ItemDescriptionshallbereadinconjunctionwiththeTechnical specification and, drawing,Generalconditionsofthecontractandallotherterms&conditionsspecifiedintheentirebid document. 3] All the above mentioned items should be BIS approved. |
