|
| 1 | Supply and Delivery of Mahindra Tractor Two Wheel Drive with Engine Power 39 HP Mahindra(MAHINDRA YUVO TECH+ 405DI ) |
| 2 | Tractor model number- Mahindra |
| 3 | Tractor Engine capacity (cc) -2987 |
| 4 | Type of Fuel - Diesel |
| 5 | Vehicle Emission Compliance -Bharat Stage |
| 6 | Colour of the Tractor-RED |
| 7 | Max Engine Power (HP)-42 |
| 8 | Engine RPM at Max power-2000 |
| 9 | Maximum EngineTorque (Nm)-180.70 |
| 10 | Engine RPM at Max Torque (@rmm)-1000 |
| 11 | Power Take - off (PTO) Type-Transmission |
| 12 | Maximum PTO Power (HP)-38.5 |
| 13 | RPM at Maximum PTO Power-2000 |
| 14 | Operator Station-Open Station |
| 15 | Engine Aspiration System-Natural |
| 16 | Engine Cooling-Wter Cooled |
| 17 | Fuel Injection-Inline |
| 18 | Fuel Tank Capacity (Ltrs) - 53.00 Litre |
| 19 | Length of Tractor Body (mm)-3740mm |
| 20 | Width of Tractor Body (mm)-1690mm |
| 21 | Ground Clearance (mm)-370mm |
| 22 | Wheel Base (mm)-1930mm |
| 23 | Size of Front Tyre with ply rating (mm)-6.00-16:8PR |
| 24 | Size of Rear Tyre with ply rating (mm)-13.6x28 12 |
| 25 | Track width front (mm)-1220mm |
| 26 | Track Width Rear (mm)-1325mm |
| 27 | Tractor Transmission System-Constant Mesh |
| 28 | Number of Forward Gears/Setting-12 |
| 29 | Type of Wheel Drive-Two Wheel |
| 30 | Driver Axle-Rear |
| 31 | Type of Steering-Power |
| 32 | Tractor Brake-Oil Immersed |
| 33 | Type of Clutch-Dry Clutch |
| 34 | Clutch Operation-Single |
| 35 | Lifting capacity at Hitch Point (kg)-1635.62kg |
| 36 | Turing Radius (mm)-3145mm |
| 37 | Warranty Time (Month)-24 month |
| 38 | Supply and Delivery of SHIVAM AGRICULTURE WORKS--SHIVAM AGRICULTURE WORKS Semi Trailer (Single Axle) with Tipping Platform of Capacity 5 tonne |
| 39 | Type of Trailer- Semi Trainer (Single Axle) |
| 40 | Type of Platform-Tipping Platform |
| 41 | side boards-Fixed Side Board |
| 42 | Capacity of Trailer (Tonnes)-5 Tonne |
| 43 | Axle Assembly Wheel Track(mm)-1500 |
| 44 | Number of Wheels-2 |
| 45 | Overall width of trailers between extreme points (meter)->1.75<=2 |
| 46 | Overall width of trailer measured between extremepoints (meter) (Exact Value)-1.82m |
| 47 | Overall length of Platform->2.5<=3.5 |
| 48 | Overall length of platform (meter) (Exact Value)-3.048m |
| 49 | Overall Height from supporting surface (ground) tothe top of the sideboard {As per clause 3 of AIS 112,The height of the trailer measured from the levelsupporting surface to the top of the sideboard in un-laden condition} (meter)->1.1.6<=2 |
| 50 | Overall Height from supporting surface (ground) tothe top of the sideboard {As per clause 3 of AIS 112,The height of the trailer measured from the levelsupporting surface to the top of the sideboard in un-laden condition} (meter) (Exact Value)-1.8 m |
| 51 | Height from supporting surface (ground) to the topof the platform {As per clause 3 of AIS 112, Theheight of the trailer measured from the levelsupporting surface (ground) to the top of theplatform in un-laden condition} (meter)-1.21 m |
| 52 | Ground Clearance (mm)-300 mm |
| 53 | Construction1. Material used for fabrication of trailer as perClause-5, Table-1 of IS:8213 (latest), 2. RetroRefl ective Marking (tapes) as per AIS -090, 3.Lighting and Lighting -signalling device as per AIS-062, 4. Trailers shall be fi tted with Rear Under RunProtective Device (RUPD) confi rming to IS 14812(latest), 5. The trailer shall be fi tted withpneumatic tyres and rims conforming to IS 13154(latest) or IS 15636 (latest) and IS 10694 (Part 6)(latest), 6. Trailers shall have service and parkingbrakes confi rming to requirements as specifi ed inAIS-043, 7. Hydraulic ram of suitable capacitycompatible with tractor hydraulic shall beprovided in case of tipping type. The ram may beused in single or tandem as per need and theoperating pressure shall not exceed 13.8 MPa, 8.Tipping angle of the body, in case of tipping type,shall be 42° to 50°, 9. In case of the balancedtrailer - the distance from the edge of theplatform to the centre of front wheel and fromrear edge of the platform to the centre of rearwheel shall be not more than 0.8 m, 10. The semi-trailer shall be provided with suitablearrangement in the front for keeping the trailer ina levelled position when detached from thetowing tractor. |
| 54 | Number of lashing hooks for towing down load-4 |
| 55 | Painted Colour on the Trailer-Red |
| 56 | Certifi cation & Warranty |
| 57 | Conformity to standards-AIS 112(lates) and IS 8213 (latest) |
| 58 | Necessary clearance from RTO to be obtain before supply of trailer - Yes |
| 59 | Avaliability of test report from approved laboratory to prove conforming to specification as per AIS 112(latest) - Yes |
| 60 | Warranty (in months) - 24 Months |
