|
| 1 | Contract Details |
| 2 | A and B Check:Inspection, maintanance and servicing including Engine/Alternator/Control panel ofDG set for routine check up for smooth functioning complete all as manufacturers instructions and all as directed by Engineer - in - Charge (a) Checking of lubricating oil condition(b)Checking engine for oil, diesel, water leakage and correcting the same (c) Checking of all the nut, bolts of engine and alternator(d) Checking of all belts and adjust the tenson properly (e) Cleaning of air filters (f) Checking and readjusting the valve clearance(g) Change of Oil/Fuel filters and engine oil if necessary (h) Checking of startor motor battery and charger (i) Checking of cooling system and fuel system (j) To check all power cables and AVR connections and mounting bolt tightnees of alternator(k) To check the function of AVR genaral checks (l) To check control panel meters and gadgets functiong (m) To check all control and safety wirings B Check(n) Checking of flexible coupling of engine and alternator (o) Cleaning of crank case ventilation pipe (p) Checking of injectors and fuel pump (q) Checking of alternator and carbon brushes of following capacity DG sets. NOTE:(1)Spares required will be paid and measured separately (2)Inspection/checking report submit as per manufacture recommendation (3) Servicing/routine check ups carried out through auth rep of manufacturer (4)Make of spare recommendation by Auth dealer.(a) DG set of capacity 320 KVA Make: Cumins |
| 3 | DG set of capacity 400 KVA Make: Cumins |
| 4 | DG set of capacity30 KVA Make: Kirloskar Green |
| 5 | Supply and replacement offuel/oil filter (\"B\" Checkkit), NT/NTA of 320 KVA DG Set |
| 6 | Supply and replacement of fuel/oil filter (\"B\" Checkkit), NT/NTA of 400 KVA DG Set |
| 7 | Supply and replacement of engine oil Valvoline Premium Blue 7800 Plus |
| 8 | Supply and replacement of Inhibitor corrosion 10 Litres cane |
| 9 | Supply and replacement of Kit Air cleaner element of 320 KVA DG Set |
| 10 | Supply and replacement of Kit Air cleaner element of 400 KVA DG Set |
| 11 | Supply and replacement of Screw captive washer cap of 320/400 KVA DG set |
| 12 | Supply and replacement of belt of 320/400 KVA DG set |
| 13 | Supply and replacement of gasket, rocker lever housing of 320/400 KVA DG set |
| 14 | Supply and replacement of screw captive, washer cap belt of 320/400 KVA DG set |
| 15 | Supply and replacement of seal, O ring of 320/400 KVA DG set |
| 16 | Supply and replacement of hose plainof 320/400 KVA DG set |
| 17 | Supply and replacement of clamp hose of 320/400 KVA DG set |
| 18 | Supply and replacement of thermostatof 320/400 KVA DG set |
| 19 | Supply and replacement of gasket thermostat housing of 320/400 KVA DG set |
| 20 | Supply and replacement of seal rectangular ring of 320/400 KVA DG set |
| 21 | Supply and replacement of switch magnetic of 320/400 KVA DG set |
| 22 | Supply and replacement of gasket intake manifold of 320/400 KVA DG set |
| 23 | Supply and replacement of NT 855hose & belt kit of 320/400 KVA DG set |
| 24 | Supply and replacement of gauge sight of 320/400 KVA DG set |
| 25 | Supply and replacement of sensor temperature of 320/400 KVA DG set |
| 26 | Supply and replacement of Rectifier service kit- HC 4/5 of 320/400 KVA DG set |
| 27 | Supply and replacement of pick up magnetic of 320/400 KVA DG set |
| 28 | Supply and replacement of gasket breather of 320/400 KVA DG set |
| 29 | Supply and replacement of coolant K SUPER COOL PLUS-50-50 PREMIX of 10 litre Cane |
| 30 | Material and labour for repairing of AMF panel up to 400 KVA DG set, checking of relays and contactors logic units, HRC fuses and connections complete Note :Spare required will be measured and paid separately under relevant items |
| 31 | Supply and fixing Push buttons (Existing type) with necessary mounting arrangement |
| 32 | Supply and fixing Relays (Existing type 24/12 Volts) upto 400 KVA DG Sets AMF panel.Make: L&T, Siemens, Legrand or equivalent |
| 33 | Supply and fixing Relays (Existing type 240 Volts AC) up to 400 KVA DG sets AMF panel. Make: L&T, Siemens, Legrand or equivalent |
| 34 | Supply and fixing Auxiliary Contactors (Existing type) with logic units. Make: L&T, Siemens, Legrand or equivalent |
| 35 | Supply and fixing Timers any type. Make: L&T, Siemens, Legrand or equivalent |
| 36 | Rotatory switches or mode selector switches 10A 3P, 3W |
| 37 | Ammeter 0-500A with CTs of size 96x96mm panel mounting digital type accuracy class -1. Make :L&T/ Rishab/AE |
| 38 | Voltmeter 0-500V with CTs of size 96x96mm panel mounting digital type accuracy class -1. Make :L&T/ Rishab/AE |
| 39 | VMR 3P 415V. Make: Proton/ Minilec |
| 40 | M&L for replacingpanel door locks brass HEAVY DUTY Allen key operated suitable to match the existing one including taking down the existing defective one all as directed. |
| 41 | Supply and fixing Normal open & normal close contactor. Make: L&T, Siemens, Legrand or equivalent |
| 42 | Supply and fixing Contactors main for upto 400 KVA DG set4 pole 415 voltsMake: L&T, Siemens, Legrand or equivalent |
| 43 | MCB SP 6 to32A \"C\" Series. Make:- L&T/ Legrand/Schneider |
| 44 | MCB SPN 32A \"C\"series. Make:- L&T/ Legrand/Schneider |
| 45 | Supply and fixing Auxiliary contactor coil 240 volts 50 HZ AC supply. Make: L&T, Siemens, Legrand or equivalent |
| 46 | Meterial and labour for dismantling of24 volts self motor complete from engine transportation to workshop & back opening of self motor cheking and repair replacement of worn out parts reassamble the same completeall as directed.Note: Spares required for reapir paid and measured separately |
| 47 | Supply and replacement of starter soleniod 24 V single coil |
| 48 | Supply and replacement of carbon brush set any type with brush holder |
| 49 | Supply and replacement of plunge end driver |
| 50 | Rewinding offield coils with existing gauge supper enameled copperwire |
| 51 | Supply and replacement of armature |
| 52 | Meterial and labour for dismantling of12 volts self motor complte from engine transportation to workshop & back opening of self motor cheking and repair replacement of worn out parts reassamble the same completeall as directedNote: Spares required for reapir paid and measured separately |
| 53 | Supply and replacement of starter Soleniod 12 V single coil |
| 54 | Supply and replacement of carbon brush set any type with brush holder |
| 55 | Supply and replacement of plunge end driver |
| 56 | Rewinding offield coils with existing gauge supper enameled copperwire |
| 57 | Supply and replacement of armature |
| 58 | Supply and fixing battery charging unitsuitable for 12 volts battery fixing in inside the AMF panel enclosure including taking down u/s battery charging unit complete |
| 59 | Supply and fixing battery charging unitsuitable for 24volts battery fixing in inside the AMF panel enclosure including taking down u/s battery charging unit complete |
| 60 | Supply and fix maintanance free lead acid battrey 12 volts 90 AH and outer case having the low/high electrolyte indication and battery charging indication all as directed. |
| 61 | Supply and fix maintanance free lead acid battrey 12 volts 150 AH and outer case having the low/high electrolyte indication and battery charging indication all as directed. |
| 62 | supply and fixing non return banjo bolt including taking down unserviceable banjo bolts |
| 63 | Taking down old self starter12Vfrom engine, repairing/ overhauling, reassembling testing including ensuring smooth functioning by replacement of following spare parts complete all as directed:-(a)Armature assy |
| 64 | Vendex pinion |
| 65 | Carbon brush holder with carbon set |
| 66 | Nuts Bolts & Washer |
| 67 | Electrical coil |
| 68 | Taking down old self starter24Vfrom engine, repairing/overhauling, reassembling testing including ensuring smooth functioning by replacement of following spare parts complete all as directed:-(a)Armature assy |
| 69 | Vendex pinion |
| 70 | Carbon brush holder with carbon set |
| 71 | Nuts Bolts & Washer |
| 72 | Electrical coil |
| 73 | Supply and replacement fan belts complete set |
| 74 | Supply and replacementAir cleanerclamp |
| 75 | Supply and replacement of Rocker cover joint |
| 76 | Supply and replacement of Lub oil cooler |
| 77 | Supply and replacementHose for Air cleaner of 30 KVA DG set |
| 78 | Supply and replacement of Teflon oil seal of 30 KVA DG set |
| 79 | Supply and replacementBranded Wrapped belt |
| 80 | Supply and replacement fuse holder with fuse blown indicator(220/230 V) |
| 81 | Supply and replacement indicating lamp 230/220 VLED type |
| 82 | Supply and replacement indicating lamp 12 V DCLED type |
| 83 | Supply and replacement LFL sensor (Fuel level sensor) |
| 84 | Supply and replacement gasket for cylinder head |
| 85 | Supplyand replacement offuel filling flexible pipes |
| 86 | Supplyand replacement water temparature gauge sensor |
| 87 | Supplyand replacement magnetic pick up of DG Set upto 400 KVA |
| 88 | Supplyand replacement injector overflow pipe |
| 89 | Supply and replacement of thermostat |
| 90 | Supplyand replacement fuel feed pump of upto 400 KVA DG set |
| 91 | Supplyand replacement of engine speed control unit suitable forDG set of capacity 320 KVA |
| 92 | Supply and fixing asbestos rope(Superior quality and with stand the silencer temperature) on exhaust silencer pipe includingtaking out old asbestors rope from, the above DG set, all as directed by Engineer-in-Charge at site. |
| 93 | Taking down brunt unserviceableAutomatic Voltage Regulatorassy from alternator of DG set by disconnecting its electrical connections, supply and fixing new AVR 12V suitable for 30 KVA DG Set including connecting all electrical connections. Testing voltage after starting engine and setting properly if a difference all as specified and directed. |
| 94 | Supply and replacement oil pressure guage as per existing sample & capacity including removing old oil pressure gauge (Make : Yankey/ Pricol) |
| 95 | Supplyand replacement of temprature gauge oil/water in the DG set including taking down old temp guage (MakeYankey/Pricol) |
| 96 | Taking down old fuel/oil pipe line with banjo bolt supply and fixing new fuel/oil pipe lines (High pressure rubber pipe covered with steel armoured |
| 97 | Supply and fixing digital panel meter multi function having the parameters voltage , current, frequncy, power factor, operated in 3 phase 415 voltswith CTs, Cl-1.0 of Make: L&T, Siemens, Legrand or equivalent |
| 98 | Supply and connectioncopper battery lead connection suitable for 2 x 12 V,180 A H battery 2.0 mtr long each for positive & Negative connections and 0.5 mtr long for battery inter connection load duly pre soldering and fixingof lugs and end copper terminal and testing complete all as directed by Engineer-in-Charge ( Make: Polycab, Finolex, Havells) |
| 99 | Supply and fixing battery terminal made up of brass including taking down u/s battery terminal |
| 100 | Supply and filling of distrilled water and acid mix water in the battery of DG set |
| 101 | Supply and replacement of element diesel/Fuel filter with gasket suitablefor 30 KVA capacity of DG set of Kirlosar Make |
| 102 | Supply and replacement of element oil filter with gasket suitablefor 30 KVA capacity of DG setof Kirlosar Make |
| 103 | Supply and replacement of fan belt suitable for 30 KVA capacrtity of DG set of Kirlosar Make |
| 104 | Supply and replacement of element air filter with gasket suitablefor 30 KVA capacity of DG set of Kirlosak Make |
| 105 | Supply only cotton waste for dusting and cleaning of DG set |
| 106 | Supply only rotary barrel hand pump for filling of fuel suitable for 210 litre barrel |
| 107 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. |
