Tender For Repair To B/R Related Works In Hangers Of Army Avn Sqn Including Technical Area In Aor Of Age B/R Lekhanagar Under Ge Nasik Road.
Tender Value
50 Lakhs
Estimated cost
Bid Submission
01 Jul 2025
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nasik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To B/R Related Works In Hangers Of Army Avn Sqn Including Technical Area In Aor Of Age B/R Lekhanagar Under Ge Nasik Road.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Jun-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-Jul-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for applying one coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying Apex, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 2 | M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying Apex, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 3 | M&L for two coats of distemper oil emulsion white or tinted on walls over a coat of primer, including preperation of surfaces by washing, rubbing down, stoppingand complete removal of old distempered surface etc. |
| 4 | M&L for 3mm thick wall care putty on wall. |
| 5 | M&L for one coat of distemper oil emulsion white or tinted on walls over a coat of primer, including preperation of surfaces by washing, rubbing down , stopping and complete removal of old distempered surface etc. |
| 6 | M&L for One coat of distemper oil emulsion white or tinted on ceilings over a coat of primer, including preperation of surfaces by washing, rubbing down and stoppingand complete removal of old distempered surface etc. |
| 7 | Taking down carefully (copper/aluminium) point wiring in ceiling and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engineer-in-Charge. |
| 8 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified. |
| 9 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wallas per specifications and drawing |
| 10 | Supply and fixing position suspended false ceiling system using T-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross tee25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm( thickness of the materail of 0.30mm). using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clipscomplete all as specified and directed by Engr-in-Charg. |
| 11 | Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directed. |
| 12 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws (at any height / any location ) complete all as specified and directed. |
| 13 | S&F for 2 mm fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall (at any height / any location ) complete all as specified and directed. |
| 14 | S&F for pre-painted galvalume aluminum zinc coating GI based plainsteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall,ridgesfixed with self tapping screws as specified |
| 15 | Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge. |
| 16 | M&L for preparing oldsteel surfaces of any description over 10 cm in width or girth and applying two coats sythetic enamel paintwith one coat of \"H\" primer as directed by Engr-in-charge inclnecessary scaffolding and other safety arrangement to work at any height at site if required. |
| 17 | Dismantling PVC (SWR) pipeany size and in any position complete all as directed by Engr-in-Charge. |
| 18 | S&F for 110mmPVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls |
| 19 | S&F for 110mm PVC (SWR) bends any radius |
| 20 | S&F for 110mm PVC (SWR) branch piece, single (single Y) equal or unequal |
| 21 | Excavation in post holes (or similar holes) each in n exc 0.5 cum getting out and removing surplus soil to a distance in n exc 50 m and making good surface in soft/loose soil complete all as specified and as directed. |
| 22 | S&F for roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410-W (Gde E-250) Quality -A all as specified and directed. |
| 23 | S&F for steel work as in tabular trusses/supproting pipes etc complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240 |
| 24 | S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment |
| 25 | M&L for preparing newsteel surfaces of any description over 10 cm in width or girth and applying two coats sythetic enamel paintwith one coat of red oxide as directed by Engr-in-charge incl necessary scaffolding and other safety arrangement to work at any height at site if required. |
| 26 | M&L for pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregates as in cover slab / MH cover complete all as specified and directed. |
| 27 | M&Lfor TMT bars 5mm dia and over upto and including 10mm dia used in cover slab / MH cover cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. |
| 28 | Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles. |
| 29 | M&L brick masonry with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6. |
| 30 | M&L for PCC(1:4:8) type D-2 using 40mm graded stone aggregate in foundation mass concrete and filling complete. |
| 31 | M&L for PCC 1:2:4 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in surface channels and drains etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge |
| 32 | Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints,hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 33 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement on walls complete all as specified and as directed |
| 34 | Moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete. |
| 35 | M&L for broken stone hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled / rammed to a true surfaces complete. |
| 36 | Demolition of cement concrete (unreinforced)in ground floors and pavings n. exc 15 cm thickness (below or above ground level) |
| 37 | M&L for PCC 1:4:8 Type D-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and as directed. |
| 38 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper mbedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping complete all as specified and directed |
| 39 | Dismantling of steel window/ventilators any description and any size complete all as specified and directed. |
| 40 | Taking down chowkhats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n .exc 4 Sqm each removing from the site complete all as specified and directed. |
| 41 | S&F for powder coated aluminium (minimum 50 micron powder coated) door chowkats/frame made with aluminium section of size 100x44x2mm thick, and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directed. |
| 42 | S&F for powder coated aluminium (minimum 50 micron powder coated)shutter, aluminium section of sizevertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc; floor hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc complete all as specified and directed. |
| 43 | S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators and glazed partion frame of any size with one or more rebates including joining cleat,beading and connected accessories as required for fixing etc. complete all as specified.Note : (a) During fixing of frames, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. |
| 44 | S&F aluminium (minimum 50 micron powder coated) window and ventilator sliding shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. completeallasspecified.Note:work is to be executed for high rise bldgs. |
| 45 | S&F 3.0 mm thick sheet glass, ordinary quality and glazing with silicon gel in square n exc 0.5sqm in each pane. |
| 46 | S& F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.Note:work is to be executed at any height and situation. |
| 47 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid,bedded and pointed in any mortar. |
| 48 | M&L for Granite (of any type) work20mm thick machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match. |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out of MOD landand rubbish off the premises. |
| 50 | M&L Non skid ceramic tiles coloured 7 to 8mm thick (square/rectangular ) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 etc. |
| 51 | M&L for coloured glazed ceramic tile 7-8 mm thick as in dado/wall tiling over and including 10 mm thick backing coat in CM 1:4 in any position /shape/pattern. |
| 52 | M&L for 8-10 mm thick double charged vitrified tile as in flooring,laid in any shape/pattern over and including 15 mm thick screed in CM 1:6 as in floors. |
| 53 | NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 29440.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ. |
AI Tender Summary
Tender Timeline
Jun 24, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 01, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 01, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 03, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender