Repair Overhauling Of Engine And Allied Works Of Vehicle No Jk02at 6928 Winger Of Gmch- 1 Repairs to four wheel and brake system:- labour charges for dismantling of four wheel and brake system with repairs and replacement of defective parts with providing/fitting of new parts i.e. front wheel bearing inner-02 no, front wheel bearing outer-02 no., front wheel oil seal -02 no, rear wheel inner/outer-02 no. each, rear wheel oil seal -02 no’s each, wheel bearing grease-05 kg, front wheel overhauling kit-01 no. , rear wheel overhauling kit-02 no., front wheel hub nut/bolts-04 no’s, rear wheel hub nut/bolts-06 no’s, rear wheel axle joint-02 no. ,rear hub nut/bolts-04 no.,TQ oil-01 lit., front/rear wheel shoe spring-02 no.,rear wheel shoe spring-03 no, front wheel brake lining with rivets RH/LH side -02 set, Rear wheel brake lining with rivets RH/LH -02 set, Ratchet/slack adjuster-04 no., chuck nut -02 nos,dhoti cloth – 04 kg diesel for washing -06 ltrs, Refitting of all items and resting of all wheels and brake system and testing. The job includes cost of material and labour charges (Complete Job) 2 Repairs to rear and front leaf assyand shockers by P/F of new parts in placeof defective/ worn out / cracked leafs of vehicle i.e. leaf spring front R/H side 3rd-01 no., leaf spring front L/H side 5th-01 no, leaf spring front L/H side main-01 no., leaf spring rear R/H side 2nd-01 no., leaf spring rear L/H side 4th-01 no -clamp small-03 no., U-clamp large-04 no., bush-04 no., shackle pin-04 no.,centre bolt-04 no. clamp top-02 no., grease nipple-04 no.,tensioning ,greasing and assembling the same. The job also includes repairs of shockers including change of oil,seals, washers etc. Complete job includescost of material andlabour charges(Complete job) 3 Labour charges for dismantling of rotary fuel pump for overhauling with replacement of worn out parts and testing of fuel pump with P/F of bush -01 no., accelerator lever -01 no., Nozzle -01 set, delivery valve -01 set, pump Element -01 set., Taper roller -01 no., bleeding screw -01 no., benzo washer / bolt -02 no., Fuel pipe main -01 no., fuel pipe main -01 no, feed pump-01 no. The job includes cost of material and labour charges. (Complete job) 4 Repairs to Tie rod & King pin assy. dismantling, extraction of worn-out parts and replacement with p/f of new parts i.e. king pin-02 no., king pin bush-04 no., king pin bearing-02 no., arm bolt-01 no., spacer-02no., shims-02 no., o-ring -02 no.,king pin lock-02 no., Tie rod end L/H and R/H-01 set, tie rod end repair kit-01 kit, king pin repair kit-01 no. alignment of wheel and checking. The job includes cost of material and labour charges for fitting and checking. Complete job 5 Repairs to pneumatic brake system, by dismounting the air brake booster, dismantling them, checking and cleaning of parts, then removing worn out/ defective parts, P/F of air booster diaphragm-01 no, air booster piston-01 no, unloader valve kit- 2 nos, and bush set, testing of boosters on pressure machine, refitting. The job including the cost of material and labour charges ( Complete Charges 6 P/f of spares /material in place of defective parts by way of dismantling of propeller shaft for repair with P/F of new spares i.e.UJ cross-02 no’s Cross holder-01 no, Half yolk-02 no, Slip yoke and teeth set-01 set, centre bearing with coupling-01 no, shaft nuts/bolts-04 no, job also includes straightening of shaft all allied works, assembling the same and checking its alignment. and The job includes cost of material andlabour charges(Complete job) 7 Repairs to Self: - Repairs to self of the vehicle by dismantling it, cleaning and testing of parts and the P/F of Self carbon brush set-01 set, Field coil -01 set, bendix drive-01 no., petrol for cleaning of parts.. Testing and fitting to the vehicle. The complete job include cost of material and labour charges Complete job. 8 Complete overhauling of engine ofby way of removing the Engine from chassis of vehicle, dismantling the complete engine assembly providing and fitting of Engine seal kit -1 no. , spark plug -4 nos. , Belt- 2 Nos. , Timing belt- 1 no. , full gasket set-1 no., M.oil filter-1 no. , water pump-1 no. , air filter-1 no. , timing bearing -1 no. , coolant- 3 ltrs, gear oil -2.5 ltrs , GTX SUV 5W30 -4.5 ltrs , RTV 85 gm – 1 no., Ring set-1 no. , Main Bearing -1 no. , Big End Bearing -1 no., Head Valve seal-16 nos. , fuel filter-1 no., oil pump assembly- 1 no. , piston -1 set, head valve exhaust-8 nos. , Head valve inlet-5 nos. , sleeve set-1 no. , thrust washer -2 nos. , connecting rod assembly – 3 nos. , GTX ultra 5W30 500 ml- 3 nos. , crank -1 no., cover assembly clutch – 1 no. , Disc clutch -1 no. , bearing clutch release- 1 no. , liquid gasket -1 no. , nut bolts, diesel for washing, etc. The complete job includes carrying engine block to lathing workshop turning facing of engine block, other lathing job as per requirement. The complete job includes complete assembling of engine and testing of engine after fitting on vehicle chassis unit. The complete job includes cost of labour for complete engine overhauling, tool and tackles charges, material charges, carriage charges and all kind of taxes.
