|
| 1 | MoRT&H-201 Clearing and grubbing road land;-Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shurbs, saplings and trees upto girth 300mm, removal of stumps of trees cut earlier and disposal of unservicable materials and stacking of servicable materials to be used or auctioned, upto a lead of 1000mtrs including removal and disposal of top organic soil not exceeding 150mm in thickness including all labour, hire charges of all machineries etc... complete. By mechanical means in area of light jungle |
| 2 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 3 | MoRT&H 3003-Maintenance of Earthen Shoulder (filling with fresh soil): Making up loss of material / irregularities on shoulder to the design level by adding fresh approved soil upto 150mm excavated by excavator, carriage by tipper and compacting it with plate compactorto the desired field density including cost of all materials, labour, hire charges of machinery,loading, unloading, lead & lift etc., complete. |
| 4 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 5 | Surface Drains in Soil New:- Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 1000 metres including all lead, lifts,all labour, usage charges of all machinery etc., complete. |
| 6 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 7 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm: Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2, includingcost of all materials, all labour, usage charges of machinery, lead, lifts, loading, unloading stacking,transporting etc., complete Grading -II 13mm (Nominal Size) |
| 8 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 9 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 10 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffic control,cost of all materialsall labour, lead, lifts, loading, unloading transporting etc., complete. |
| 11 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 12 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 13 | SupplyingandFixingofMoldedShankRaisedPavement Markers / Cat\"s Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO IIIDt11.06.1997.Theheight,widthandlengthshallnot exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the baseshallbe35+/-5degree.Thestrengthofdetachment oftheintegratedcylindricalshanks,(ofdiameternotless than 19 +/- 2 mm and height not less than 30+/- 2 mm) from thebodyistobeaminimumvalueof500Kg.Fixingwill be by drilling holes on the road for the shanks to go inside, withoutnailsandusingepoxyresinbasedadhesiveasper manufacturer\"srecommendationandcompleteasdirected bytheengineer.Thecontractorshallsubmitatwoyear warranty for satisfactory field performance including stipulated retro-reflectanceofthereflectingpanel,totheEngineer.as perMoRTH specification 806. |
| 14 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 15 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67,as per clauses including curing, cost of all materialsall labour, lead, lifts, loading, unloading transporting etc., complete. |
| 16 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 17 | from Km 308.54 to 335.064 & Km 382.70 to 400.70 of NH-52 (As per Detailed Estimate) |
| 18 | BILL NO.2: MAINTENANCE IN EMERGENCY |
| 19 | BILL NO -3 : PERFORMANCE BASED PAVEMENT REPAIR & ROAD MAINTENANCE |
| 20 | Providing treatment and repair to potholes/ruts of any depth/patch repair of all types of bitumen pavement complete as per Technical Specification Clause 3004.2 and as per direction of Engineer by using paving grade bitumen/emulsion/cold ready mix material. The Job includes removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause no.503, back filling with material of equivalent specification to the original construction and finished with 40mm thick BC layer as per Clauseno.507.Compacting trimming and finishing the surface to form a smooth continuous surface all as per Clause no.3004.2 of Technical Specifications. and other items mentioned in Clause3 of Section7 of contract agreement such as C&G, maintenance of Shoulder, maintenance of sign boards, Maintenance of drains, culverts,crash barrier, concrete railing etc. |
| 21 | From Km 308.54 to 335.064 & Km 382.70 to 400.70 (2lane without paved shoudler) |
