Tender For Construction Of Anganwadi At Kalote Ponda Wadi , In V.P.Kalote , Tal- Khalapur, District. Raigad
Tender Value
11.91 Lakhs
Estimated cost
Bid Submission
16 Jun 2025
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khalapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Anganwadi At Kalote Ponda Wadi , In V.P.Kalote , Tal- Khalapur, District. Raigad
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 2 | Item No.:-2 Excavation for foundation in hard murum & boulders including removing the excavated materialup to a distance of 50 metres beyond the building area, stacking as directed, dewatering and preparing bed for foundation and necessary back filling, ramming watering etc. complete. (Lift upto 1.5 m.) |
| 3 | Item No.:-3 Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). |
| 4 | Item No.4-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 5 | Item No.5-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand |
| 6 | Item No.6- Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations,grillageand footingsofR.C.C.columnsandsteelstanchions etc.includingbailingoutwater, Steel centeringformwork,laying/pumpingcoverblocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Item No.7-ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Item No.8-Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 9 | Item No.9-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 10 | Item No.10-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 11 | Item No.11-Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 12 | Item No.12-ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 13 | Item No.13:- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing,gusset platesetc.asperdetaileddesignsanddrawingsorasdirectedincluding cutting,fabricating,hoisting, erecting fixing in position, Making riveted/ bolted/ weldedconnection and onecoatofanticorrosive paint andover it 2 coats of oil painting approved quality and shade etc. complete. |
| 14 | Item No.14- Providingandfixing6.00mmthickISImarkAsbestosCementCorrugatedsheetroofing including galvanised iron \"J\" or \"L\" hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete. |
| 15 | Item No.15- Providingandfixing6mmthickISImarkAsbestosCementridgecappingforroofing including galvanisediron hooks, bolts, galvanisediron andbituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. complete. |
| 16 | Item No.16-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 17 | Item No.17-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 18 | Item No.18-Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:4without neerufinish,to concrete,bricksurface,inallpositionsincludingscaffoldingandcuringetc.complete. |
| 19 | Item No.19-Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness andconfirming to IS. 15622-2006( groupBla) of approved make, shade and pattern for flooring in required position laid on a bed of1:4cementmortarincludingneat cementfloat,fillingjoints,curingandclearing etc. complete. |
| 20 | Item No.20-Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and patternfordadoandskirting inrequiredpositionfixedin1:4cementmortarincludingneatcementfloat,filling joints, curing and clearingetc. complete |
| 21 | Item No.21-Providingandfixinggreenmarbleof18to20mmthickfordoorframe/dado/window boxing etc. OnC.M.1:6includingfilling jointswithpolymerbase fillernosing /moulding thesharpedgeswherever necessary, curing,etc. complete. |
| 22 | Item No.22-Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 23 | Item No.23-Providingand fixingsolid coreflush door shutter commercial in single leaf 32 mmthickwithout ventilator commercial type of exterior grade as per detaileddrawings withwrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. |
| 24 | Item No.24:Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNESTYRINE(ABS)Doorshutterforinternaluseincluding toiletsmade upof outerABSsheetof1.2mmthickhavingpuffinsulationof35to40Kilogram/Cubic Metredensity and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, havingM.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete |
| 25 | Item No.25-Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt.and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc,complete. With colour Anodising without box |
| 26 | Item No.26-Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre asperdrawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete. |
| 27 | Item No. 27:Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 28 | Item No. 29:- Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. |
| 29 | Item No. 30:-Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaningetc. complete. |
| 30 | Item No. 31:-Providingandfixingstainlesssteelsinkofsize600x510x200mm incluidngcoupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. |
| 31 | Item No 32:- ProvidingandconstructingBrickMasonryInspectionChamber60cmx45cmx90cm including1:4:8 cementconcretefoundation1:2:4cementconcretechannelshalfroundG.S.W. pipes, Brick Masonry, plastering from inside and withframe fixed in cement concrete withR.C.C.Cover medium duty 140Kilogramwith frame etc complete. |
| 32 | Item No 33:- Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connectionincluding P.V.C. waste pipe andtrapup to the outside face ofthe wall.Making goodthedamaged surface, testing etc. complete. |
| 33 | Item No 34:-Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 34 | Item No 35:-Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete |
| 35 | Item No 36:-Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and builtcorrugatedinclusiveofdeliveryuptodestinationhoistingand fixing of accessories such as inlet,outletoverflowpipeinclusiveofalltankscapacity between 200 to 1000 liters |
| 36 | Item No.37-Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. |
| 37 | Item No.38:- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 38 | Item No.39-roviding & Fixing in position, Acoustical Ceiling made from Compressed polyester fibre nonwoven 9mmpanelson approved heavy duty GI frame 300 mm c to c & intermediate channels at 1200 mm c to c,suspended with Hangers from Roof, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete |
| 39 | Item no.40:-Providing and fixing 90 cm. x 60 cm. Marble plate engraving 10cm. height letter, figures including painting the lefters/figures with approved colour and shade complete. |
| 40 | Flooring:- Vitrified tiles |
| 41 | C.C.Cubes :- m-25:Compressive strength |
| 42 | BASIC TEST OF AGGREGATE:a)- Water Absorption, Specific Gravity, Impact Value, Crushing value. |
| 43 | FINE AGGREGATE: Fineness Modulus (Sieve Analysis.) Silt & Clay Content |
| 44 | BRICKS : Water Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks) |
| 45 | Cement :- Basic test of cement |
| 46 | Add Royalty Charges B) Other materials |
| 47 | GST Charges 18% |
| 48 | SQM Charges 1% |
| 49 | Labour Insurance 0.5% |
AI Tender Summary
Tender Timeline
Jun 02, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 16, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender