|
| 1 | Royalty for good earth |
| 2 | Stone for masonry work |
| 3 | Portland Cement |
| 4 | Coarse sand (zone III) |
| 5 | Solid blocks of size 30x20x15cm |
| 6 | Sundries |
| 7 | Stone Aggregate(single size): 40 mm nominal size |
| 8 | Stone Aggregate(single size):20 mm nominal size |
| 9 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 10 | Vibrator (Needle type 40 mm) |
| 11 | Structural steel such as tees, angles, channels and R.S. joists |
| 12 | Red oxide Zinc chromate primer |
| 13 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 14 | Beam clamp 300-380 mm (450-1070 mm) |
| 15 | Average rate of mild steel round bars for reinforcements |
| 16 | Stone Aggregate(single size): 10 mm nominal size |
| 17 | Fine sand (zone IV) |
| 18 | Deharadun white lime |
| 19 | Plastic emulsion paint |
| 20 | Synthetic enamel paint in black or chocolate shade |
| 21 | Anjili wood scantls |
| 22 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 23 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 24 | Bright finished or black enameled mild steel screws 40 mm |
| 25 | Bright finished or black enameled mild steel screws 20 mm |
| 26 | Mild Steel round bar above 12 mm dia |
| 27 | Flats up to 10 mm in thickness |
| 28 | Rawl plug 50 mm (designation 10 nos) |
| 29 | Anjili wood planks |
| 30 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 31 | 200 mm Aluminium aldrop |
| 32 | Iron hooks & eyes 100 mm |
| 33 | Mild steel tubes hot finished welded type |
| 34 | Welding by electric plant |
| 35 | GI trafford profile sheet 0.35mm thick |
| 36 | Bitumen washer |
| 37 | G.I Limpet washer |
| 38 | Galvanised steel J or L hooks 8 mm dia |
| 39 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 40 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 41 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 42 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 43 | Vitreous china pedestal type wate closet |
| 44 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 45 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 46 | C.I. bracket for wash basin and sinks |
| 47 | PVC pipe 15 mm outer dia 10kgf/cm2 |
| 48 | PVC pipe 20 mm outer dia 10 kfg/cm2 |
| 49 | Twisted steel/deformed bar |
| 50 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
| 51 | Multi surface paint |
| 52 | Special primer(cw) |
| 53 | Oxidised mild steel tower bolt(barreltype)200x10mm |
| 54 | Oxidised mild steel screws 30 mm |
| 55 | Oxidised mild steel handles 125mm |
| 56 | Oxidised mild steel screws 25 mm |
| 57 | Vitreous china flat back wash basin 550x400mm |
| 58 | 15 mm cp brass Tap |
| 59 | CP brass waste 32 mm |
| 60 | Semi rijid PVC waste pipe for sink and wash basin 32 mmdia with length not less than 700mm i/c PVC waste fittings |
| 61 | GI pipes 50 mm dia |
| 62 | GI pipes 40 mm dia |
| 63 | Wall form panel 1250x500mm |
| 64 | 100 mm channel shoulder2.5 m long |
| 65 | Double clip(bridge clip) |
| 66 | Single clip |
| 67 | MS tube40mm dia |
| 68 | Second class kail wood in planks |
| 69 | Second class kail wood in scantling |
| 70 | Quarry waste |
| 71 | corner angle 45x45x5 mm1.5 m long |
| 72 | Coloumn clamp450x1070 mm |
| 73 | Prop 2m (2-3.5m ) |
| 74 | Interlocking CC paver block (80 mmThick M30) |
| 75 | 6 mm nominal size |
| 76 | testing boq (enter zero while edit) |
