Development of Sports Infrastructure Facilities at Neduvathur Grama Panchayath Ground in Kottarakkara LAC-Supply and installation of Outdoor gym equipment, Kids play equipment and supply of Sports equipment-- 1 Outdoor Gym Equipment (18% GST) 2 od12469/2025_2026 : Chest Press (Double) - Supply and Installation of Double Chest Press having the following specifications: Dimensions: (L X W X H) 1955 x 710 x 1900 mm. Main center pipe - Ø 114 mm OD “B” class GI pipe. Foundation plate –M.S. round plate of Ø 250mm & 8 mm thick. Foundations cover cap- dome shape of PP / NYLON / HDPE material. Remaining frame - made up of Ø 48 mm OD “B” Class G.I. pipe. Handle - Made up of Ø48mm OD “B” Class G.I. pipe. Link - made up of Ø 48 mm OD “B” Class G.I. pipe. Seat & back rest – 380 X 275 X 60 mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Bearing bush Closing cap’s– PP / NYLON / HDPE material. Handle must be connected with frame by 8 MM laser cutting MS profile. Top Closing cap – dome shape made by PP /NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brands. Pin – Made up of Ø 25 mm M.S. bright bar pin. Bearing bushes - Ø 60 mm OD seamless pipe. Grips - High quality rubber Ø 46 mm OD. Circlips–A 24 circlips are used for assembly. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing 3 od12470/2025_2026 : Horse Rider - Supply and Installation of Horse Rider having the following specifications: Dimensions: (L XW X H) 1140 x 400 x 1400 mm. Main frame - Ø 114 mm OD “B” class GI pipe. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Foundation cover cap - dome shape of PP / NYLON / HDPE material. Remaining frame – Is made by Ø 48 mm OD “B” class GI pipe. Seat frame – Is made by Ø 48 mm OD “B” class GI pipe. Seat position must be horizontal to 110 -120 degree. Link - made up of Ø 48 mm OD “B” Class G.I. pipe. Angle between link and ground position is 10-20 degree. Handle - Ø 33 mm OD “B” Class GI pipe. Paddle vertical support - Ø 60 mm OD “B” Class GI pipe. Handle frame- Ø 42 mm OD “B” Class GI pipe dually bending design. Foot pipe - Ø 33 mm OD “B” Class GI pipe. Support frame –10 mm thick MS flat is used. Seat- Dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm<br>material HDPE. Bearing bush closing cap – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brand. Bearing bushes - Ø 60mm OD seamless pipe. Pin – Made of Ø 25 mm M.S.bright bar. Grips - High quality rubber Ø 46 mm OD. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 60 to 70 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. 4 od12471/2025_2026 : Sky Walker - Supply and Installation of Sky Walker having the following specifications: Dimensions: (L XW X H) 1720 x 910 x 1700 mm. Main frame - Made of Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Paddle vertical support - Ø 42 mm OD “B” Class GI pipe. Handle - Ø 33 mm OD “B” Class GI pipe dually bending design. Leg<br>movement frame – 50 mm x 50 mm x 2 mm thick square pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use for to support it. Top Closing cap – dome shape made by PP / NYLON /HDPE material. Closing cap’s– PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm M.S pipe. and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation<br>stool is embedded in C.C. stock below ground level. Grips - High quality rubber Ø 46 mm OD. BearingUse is 6005 permanent lubricated reputed brand. Bearing bushes - Ø 60 mm OD seamless pipe. Pin–Made of Ø 25mm M.S. bright bar. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding 8 points prior to finishing<br> 5 od12472/2025_2026 : Rower - Supply and Installation of Rower having the following specifications: Dimensions: (L X W X H) =1472 x 915 x 1040 mm. Upper and bottom pipes - Ø 88 mm OD “B” Class GI pipe. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Handle - Ø 33 mm OD “B” Class G.I pipe. Angle between handle and horizontal surface is 75 - 80 degree. Linkages – Ø 48 mm OD “B” Class G.I. pipe. Seat & back rest – 380 x 275 x 60mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Foot resting pipe - Ø 60 mm OD “B” Class G.I. pipe. End Closing cap – dome shape made by PP / NYLON / HDPE material. Closing caps – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø250 mm & 8mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Pin – Ø 25 mm M.S. bright 5 bar pin. Circlips– A 24 circlips are used for assembly. Bearing bushes - Ø 60 mm OD seamless pipe /Bar. Bearing- use is 6005 permanent lubricated reputed brands. Grips – high quality rubber 46 mm OD. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start &<br>finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing.<br> 6 od12473/2025_2026 : Triple Twister - Supply and Installation of Triple Twister (Standing position - 2 and Seating position - 1)<br>having the following specifications: Dimensions: (L X W X H) 1500 x 1500 x 1420 mm. Main frame – Ø<br>114 mm OD “B” class GI pipe. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Seat<br>plate support – Ø 60 mm OD “B” Class G.I Pipe. Seating ring - Ø 33 mm OD “B” Class G.I Pipe made by<br>rolling. Seating ring support - Ø 33 mm OD “B” Class G.I Pipe. Remaining frame – Is made by 100 x 50 x<br>2.5 mm rectangular pipe. Standing plate- Ø 300 mm OD X 10 mm thick M.S. plate. Seating plate- Ø 300<br>mm OD X 10 mm thick M.S. plate. Seating seat position and other two standing position plates are fixed<br>120 degrees each from other. Handle – Ø 33 mm “B” Class G.I. Pipe made by rolling. Top Closing cap –<br>Dome shape made by PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm<br>OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square<br>tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is<br>embedded in C.C. stock below ground level. Bearing - Used is 6005 permanent lubricated reputed brand.<br>Bearing bushes - Ø 60 mm OD seamless pipe. Pin – Made up of Ø 25mm M.S. bright bar. Circlips– A 24<br>circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety<br>Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards<br>and zinc primer paint should be applied at all the welding points prior to finishing. 7 od12474/2025_2026 : Shoulder Builder (Double) - Supply and Installation of Double Shoulder Builder having the following specifications: Dimensions: (L X W X H) 890 x 558 x 1500 mm. Main frame - Made from Ø 114 mm OD “B” Class G.I. pipe. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Foundation cover cap- dome shape of PP / NYLON / HDPE material. Shoulder ring pipe - Ø 33 mm OD “B” Class G.I Pipe. Shoulder ring pipe support – Ø 25 mm OD “B” Class G.I Pipe. Nylon knob with Bearing – Is fixed on shoulder ring pipe for rotating purpose (2 set to be fixed in a position for kids and adults). Top Closing cap’s- PP / NYLON / HDPE material. Closing cap – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brands. Pin – Ø 25 mm M.S. bright bar pin. Foundation plate – M.S. roundplate of Ø 250 mm & 8 mm thick.<br>Bearing bushes - Ø 60 mm OD seamless pipe. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. 8 od12475/2025_2026 : Air Walker - Supply and Installation of Air Walker having the following specifications: Dimensions: (L X W X H) 1190 x380 x 1244 mm. Main Frame- Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Paddle– Ø 42 mm OD round GI pipe. Handle – Ø 33 mm OD “B” class GI pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use to support it. Top Closing cap – dome shape made by PP / NYLON / HDPE material. Closing cap’s - PP / NYLON / HDPE material. Bracket - 8 mm thick laser profile is use to support paddle frame. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing- use is 6005 permanent lubricated reputed brands. Pin’s – Ø 25mm M.S. bright bar pin. Circlips– A 24 circlips are used for assembly. Bearing bushes -Ø 60 mm OD seamless pipe. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. 9 Kids Play Equipment & Sports Equipment (18% GST) 10 od12477/2025_2026 : Single play station: Supply and fixing Single play station with double swing and slider 65 mm medium GI 4 leg , 50mm medium GI 2 leg , 25mm and 20mm GI medium supporting members good quality FRP single mini slide of 2.1m, good quality FRP umberella of size (1x1) meter size, good quality FRP platform of size (1x1) meter size, 25mm medium GI ladder,FRP Sheet good quality LLDP rock holder wall climber.50mm x25mm GI Frame,seat belt and 6mm chain with plastic coating.plan area is 4.5m x 4.5m,height 3 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 11 od12478/2025_2026 : Jurassic slide:Supply and fixing Jurassic Slide Provided with good quality FRP fiber withJurassic body shape.Ladder support made up of<br>20mm GI pipe.Slide length 0.9 metre. plan area is 2.4 x 1.05 metre,height 1.7 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour 12 od12479/2025_2026 : Rocker Spring duck:Supply and fixing Rocker Spring duck Provided with 50mm medium class as main shaft GI, 10mm MS spring,6mm MS Plate with good quality. FRP Duck body. Plan area is 0.6 x 0.6 metre,height 0.75 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour & material charges etc. complete<br> 13 od12480/2025_2026 : SEE-SAW 4 seated Large:Supply and fixing SEE-SAW 4 seated Large Provided with 65mm medium GI pipe of 2 leg with handle of medium GI 20mm. Seat of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 1.8x 1.8 metre,height 0.35 metre. Cost inclusive of loading, unloading, transportation, erection, fixing charges, labourmaterial charges etc. complete 14 od12481/2025_2026 : Merry go 6 seat fixing:Supply and fixing Merry go 6 seat fixing Provided with 40mm Main shaft MS rad single leg with bearing. supporting membe rs of GI 25 & 20mm GI medium class. Seat size of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 0.6m^2,height 0.35 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour &<br>material charges etc. complete 15 od12482/2025_2026 : 4 seater Circular swing:Supply and fixing 4 seater Circular swing 60mm medium class GI pipe of 4Nos of leg, supporting members of 25mm,20 mm medium calss GI pipe,good quality. FRP seat of minimum size 25x25cm plan area is 2.1 x 1.5 metre,height 2.1 metre<br>Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour & material charges etc. complete 16 od14305/2025_2026 : 2 seater kids swing: Supply and fixing 2 seater kids swing 50mm medium class GI pipe of 4 nos leg , supporting members of 6mm chain,10mm hanger hook with good quality FRP fiber seat of minimum size 25x25cm. GI swing chain of 10mm diameter, plan area is 1.8 x 1.5 metre,height 1.8 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 17 od12675/2025_2026 : Cricket bat- Supply of Cricket bat, Champion Kashmir Willow Bat made of Kashmir Willow. Handle covered with high quality rubber grip & concave edges for better stability, comes with full length cover 18 od12677/2025_2026 : Ball Bag- Supply of Ball Bag having Specification: 2 side mesh panel, made with 600x 600 D polyster fabric. Suitable for 15 size 5 footballs. Size 39x 19. Brand: Ospo or similar make 19 od12678/2025_2026 : Air Pump- Supply of Air Pump having the following specifications: Single cylinder, weight approx. 1.8kg with pressure gauge, Brand: Raj cycle or similar make 20 od12681/2025_2026 : Cones 9 Inch- Supply of 9 cones made of plastic available in assorted coloursBrand: Vinex, Nivia, Cosco or similar make 21 Sports Equipments (12% GST) 22 od12676/2025_2026 : Tennis Ball- Supply of Tennis Ball: Weight 85 gm, Brand: Vicky or similar make 23 od12679/2025_2026 : Volleyball- Supply of Volleyball having the following specification: Super Volley, Genuine Leather pasted. VFI approved Brand: Cosco, Nivia, Sparten, Vats, Vixen or similar make 24 od12680/2025_2026 : Football- Supply of Football, Brand: Nivia Shining Star or similar make
