Tender For Rerouting Kadathy Feeder From Valakuzhy To Kadathy Pallithazham Underelectrical Section, Velloorkunnam, Ernakulam-Kerala

Tender For REROUTING KADATHY FEEDER FROM VALAKUZHY TO KADATHY PALLITHAZHAM UNDERELECTRICAL SECTION, VELLOORKUNNAM-- 1 Fitting one set AB switch and giving connection 2 Providing one Driven Earth using GI earth pipe at standard distance away from the pole/structure in loose soil. 3 Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling. 4 Additional rate for providing one disc set on any type of HT pole for making cut point. 5 Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 6 Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials. 7 Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 8 Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials. 9 Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 10 Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). 11 Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification). 12 Cutting trees beyond 60cm but upto and incl. 120cm girth, cutting of trunks/branches, removing the root completely and stacking. 13 Cutting trees beyond 30cm but upto and incl. 60cm girth, cutting of trunks/branches, removing the root completely and stacking. 14 Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. 15 Traffic signal painting of pole 1.5m height using black and white paints in alternate rings of 25cm width incl. cost of paint as specified. 16 Numbering of Tree (marking for cutting the tree) using yellow enamel paint as specified incl. cost of paint. 17 Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits. 18 Providing Fly stay for LT pole using LT PSC pole incl. digging & back filling pit. 19 Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 20 Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 21 Providing Strut using LT PSC pole incl. digging & back filling pit. 22 Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 23 Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 24 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 25 Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling 26 Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion. 27 Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion. 28 Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting. 29 Re-joining one snapped HT conductor after removing damaged portion incl. re-tensioning and conveyance of all materials complete. 30 Straightening one slanted 11kV pole after unbinding the line and rebinding the line after work. 31 Straightening one slanted 11kV Cut pole after lowering down the existing line and stringing the line after work. 32 Drilling hole of various sizes on existing Channel/Cross Arm. 33 Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole. 34 Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. 35 Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. 36 Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line. 37 Additional rate for excavation of Pit for A type pole in Laterite. 38 Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite. 39 Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. 40 Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock. 41 Re-joining snapped one LT conductor after removing damaged portion incl. Reshackling and conveyance of all materials complete. 42 Dismantling One set MVT of 11 KV AB Cable (Half rate of 921.23 of key 1135 ) 43 Dismantling of Anchor clamp / dead end clamp of 11 KV ABC suitable for 70 to 120 sqmm bare/insulated Messenger 44 Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable 45 Erection of Anchor clamp / dead end clamp of 11 KV ABC suitable for 70 to 120 sqmm bare/insulated Messenger 46 Fitting one Additional V cross arm in existing single pole incl. conveyance of materials. 47 Conveyance of one km 11kV line materials from section store/stacking place to the work site (excluding poles). 48 Fitting one additional F top bracket 49 Fitting one additional HT pin with insulator 50 Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole 51 Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 52 Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. 53 Renewal of existing damaged/broken old 11kV Stay to the existing stay rod. 54 Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary. 55 Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit. 56 Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling. 57 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 58 Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 poles. (Running km).

INR 2124 /-

INR 22200.0 /-

INR 8.86 Lakhs /-