Tender For Supply And Fixing Of 03 Mtr Decrotive Pole With 120 Watt Light 01 Nos At Various Place Under Nagar Palika Parishad Seohara
Tender Value
9.31 Lakhs
Estimated cost
Bid Submission
21 Jun 2025
0 days left
EMD
93134
Bank guarantee accepted
Document Fee
2460
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
seohara → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Supply And Fixing Of 03 Mtr Decrotive Pole With 120 Watt Light 01 Nos At Various Place Under Nagar Palika Parishad Seohara
BOQ
| Sl. No. | Item Description |
| 1 | Decorative ornamental pole having gravity casted aluminum bottom base(min height-1370mm) and aluminum casted attachment design with leaves and other carving design above base .Pole is having ribbed extrusion GI pipe dia 105mm from bottom to top with minimum 14 no\"s grooves .The ribbed/grooved section is fixed /welded with round base plate having dimension dia600mmx 20mm thick. The pole is suitable for mounting on concrete pedestal with four nos foundation bolts M16x600mm.A service window is provided internally in lower casted base. Pole is duly primer coated and Polyurethane painted with DFT min 90 microns in color as approved by engineer in charge |
| 2 | Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 120 watt Watt. Confirming to IP 66 Protection complete in all respect. Labour Rate |
| 3 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cabel 1100 Volts grade at a depth of 750 mm below ground level over a cusion of 75 mm thick sand all around and protected with burnt bricks on sides and top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (16mm 2 core) |
| 4 | supply and wiring of submains with two nos. of 2.5sq. mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of of the work as directed at site by Engineer in charge. (2 nos 6 sq. mm mitistandard copper conductor cable.) |
| 5 | Supply and laying of 50mm dia heavy guage 14 SWG (2mm thick) rigid steel conduit complete with bend and other acessories as required and 14 SWG fish steel wire etc. in slab alongwith reinforcement before concreting, and plastering etc complete in all respect.heavy duty PVC (2 mm thick) conduit of 50 mm dia. (G.I. Wire) |
| 6 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc complete in all respect as per direction of the Engineer in charge |
| 7 | S&F of 6 Amp. To 32 Amp. DP MCB (10KA) C Curve (CAT-A) |
| 8 | Supply and fixing automation street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of tie switch TSO 100 series with contactors,HRC fuses isolating switch metering instrument & box with CTs etc in case of TPN complete in all respect 40TPN |
| 9 | Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe up to switch board (from appron to swithc board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing of poles also). (Earthing Pole) |
| 10 | Dismantlingdammaged cement concreteroad including base concreteand including stacking of dismantled materials as directed by the engineer-in-charge with in a distence of 60 m(200 Ft) |
| 11 | Earth work in excavtaion in ordinary soil, excavation to be form of regular pits not exeeding 1/2 meter (20\"\") depth and earth work in embankment to be in 20cm (8\"\") layers including ramming and dressing the surface to required levels and slopes and also including 1.50 M (5ft) lifts and 30 M (100ft) lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M (100ft) distance as directed by the engineer in charge. Cartage of earth or yly ash when added to schedule item no. 253(a), 231(a) 1st km if lead distance is beyond 1/2 km for departmental work. (Upto 5 km) |
| 12 | Cement concrete with 2cm guage apporved stone grit coarse sand and cement in proportion of 1:2:4 including supply of all materials labour and T&P etc required for proper completion of work. |
| 13 | extra cost for bolts 12mm dia and 0.60 m height i/c all complete |
| 14 | extra cost paint at foundation with arcelic paint height i/c all complete |
| 15 | 85%old interlocking only laying |
| 16 | new interlocking |
| 17 | ADD GST @18% |
AI Tender Summary
Tender Timeline
Jun 02, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 21, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 21, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender