Tender For Installation Work Of 12.5 M High Mast Electric Light Near Gandhi Chowk In Atarra Town
Tender Value
5.82 Lakhs
Estimated cost
Bid Submission
10 Jun 2025
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
1062
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
naraini → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Installation work of 12.5 m high mast electric light near Gandhi Chowk in Atarra town
BOQ
| Sl. No. | Item Description |
| 1 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1010 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35.00 sq. Mm |
| 2 | S/F of 32 Amp 415 V Metal clade TPN rewireable type switch fuse unit complete on angle iron bracket complete in all respect. Cat B |
| 3 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive &conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonryhousing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 4 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN |
| 5 | Supply and fixing of single unit LED aviationobstruction light complete with transformer and LEDspiral etc complete in all respect.. CAT AAA |
| 6 | Supply & fixing of 12.5 Mtr. high mast shaft of appproved make with rising system hot dip galvanized, inside and outside, dip heaving pole sheet thickness 3 mm. Top dia minimum 150 mm, bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3. There and having no circumferntial weld, with accessories for high mast such as head frame suitable for 6 luminaries and its control gear boxes 0.75 H.P. power toll motor, 3 point suspension system with steel wire rope 6 mm dia double drem winch, including makingsuitable foundation as per manufacture drawing/site reuiment along with foundation bolts, nuts, washers, anchor plates etc. complete in all respect. |
| 7 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 200 watt. Confirming to IP 66 protection complete in all respect. Cat AAA |
| 8 | Supply and wiring of submains with 2 nos. 2.5 sq mm &with 1 no earth wire of 4 sq mm FRLSH PVC insulated1100 V grade single core multistrand copper conductorcable in existing PVC conduit complete, includingsupply of all material, labour and T & P etc. required forproper completion of the work as directed by Engineer incharge. |
| 9 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.as per direction of Engineer-Incharge.complete in all respect The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq mm x 4 core. |
| 10 | Supply and laying of 25mm x 3mm G.I. strip from earthelectrode directly in the ground as required complete inall respect. |
| 11 | S/F of 5 KVA 3PHASE steblizer with encloser box. |
| 12 | S/F of Reflective retro Sign Board with angle iron supportng nut bolt complete in all respect. |
| 13 | S/F of 12 way M.S. cage suitable for supporting 12 Nos. flood light, complete in all Respect. |
AI Tender Summary
Tender Timeline
Jun 02, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 10, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 10, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender