Tender For Provision Of Power Back Up Facility And Repairing To Existing Old Wiring And Toilets At Gurukul Saptarshi Sevashram, Deogaon (Dayanand Vihar) Dhumbhata Under Csr 2025-26
Tender Value
6.25 Lakhs
Estimated cost
Bid Submission
14 Jul 2025
0 days left
EMD
13000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
badmal → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Power Back Up Facility And Repairing To Existing Old Wiring And Toilets At Gurukul Saptarshi Sevashram, Deogaon (Dayanand Vihar) Dhumbhata Under Csr 2025-26
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Jul-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Jul-2025 |
| 2 | 23-Jun-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-Jun-2025 |
| 3 | 30-Jun-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Provision of power back up facility and repairing to existing old Wiring and Toilets at Gurukul Saptarshi Sevashram, Deogaon(Dayanand Vihar) Dhumbhata under CSR 2025-26 |
| 2 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each. |
| 3 | Taking down cement plaster on brick walls, including raking out joints, hacking for key, scrubbing down with water, etc. and M&L, for 15mm thick cement plaster on fair faces of brick work of 1:4 cement mortar. |
| 4 | Dismantling floor tiling including cement mortar bedding (but not backing), removing rubbish off the premises and Screed bed of 15 mm thick mortar of 1:4 cement mortar for laying of tiles. |
| 5 | M&L, for non - skid Ceramic tiles 7 to 8 mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 6 | M&L, for Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. |
| 7 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 8 | S&f, for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 9 | S&F, for 150mm size aluminium anodised,barrel tower bolts of extruded section. |
| 10 | S&F, for 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21. |
| 11 | S&F, for 100mm size aluminium handles, cast type. |
| 12 | Cutting chases,for concealed water tubing and making good, to facings where required in cement mortar 1:3 and cutting not exc 10 cm girth. |
| 13 | S&F, for 15mm dia. Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls. |
| 14 | Cutting existing 15mm dia. steel tubing for alterations or additions. |
| 15 | S&F, for 15mm dia. bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90gms). |
| 16 | S&F, for 15mm dia. Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90gms) |
| 17 | S&F, for PVC connections 15mm size with PTMT nuts of length 300mm. |
| 18 | S&F,10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketslow and connections to pipes. |
| 19 | S&F, for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests ,including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor. |
| 20 | S&F, for Vitreous China wash down water closet pan (pedestal pattern)and trap white, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete . |
| 21 | S&F, for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern. |
| 22 | M&L, for applying two coat of distemper oil emulsion on walls & ceilings. |
| 23 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 24 | Surface dressing in soft /loose soil n exc. 15 cm deep and removing from the premises. |
| 25 | M&l, for Sand filling in foundations including watering and consolidation. |
| 26 | Material and labour, for Cement concrete (Type-B2,1:3:6, 40mm graded aggregate) in foundations, including use and waste of form work. |
| 27 | M&L, for old size brickwork with flyash bricks, straight on plan in half brick thick walls, built in 1:4 cement mortar. |
| 28 | M&L, for rendering 10mm thick cement plaster on fair faces of brick work of 1:4 cement mortar including preparing the surfaces. |
| 29 | M&L, for Loose filling with aggregates (Broken bricks) of gauge 80 to 150 mm in the pit of inaguration stone. |
| 30 | M&L, for 55mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) in inaguartion stone, including for use of form work. |
| 31 | M&L, for Chalk whiting, on plastered surfaces, prepara-tory to white washing and applying two coat of white wash on undecorated surfaces. |
| 32 | S&F, 600mmX600mmX20mm thick Granite stone ( of any type) table rubbed,fixed over 20mm thick screed bed of cement mortar (1:4) and polished, grooving letters of any numbers finished with golden colour. |
| 33 | Supply & fixing of 6 to 32Amp rating,Single Pole, 240 V, 10KA \"C\" Curve miniature circuit breaker (MCB) in the existing MCB DB complete with connection, testing & commissioning.The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab. |
| 34 | Supply & fixing of 40 Amp, 240 V, Double Pole Residual Current Circuit Breaker (RCCB) for earth leakage, overload & short-circuit protection with Sensitivity 30 mA in the existing MCB DB complete with connection, testing & commissioning. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab. |
| 35 | S & F of modular cover plate with frame, 3 Module, Make-Cona, Anchor, Crabtree, V-Guard, Legrand, Goldmedal. |
| 36 | S & F of Modular Metal Flush Box, 3 Module, Make-Cona, Anchor, Crabtree, V-Guard, Legrand, Goldmedal. |
| 37 | S & F of Modular Sockets, 6A/16A-2/3 Pin Combined, 2 Module, Make-Cona, Anchor, Crabtree, V-Guard, Legrand, Goldmedal. |
| 38 | S & F of Modular Switch, 1 Way, 1 Module, 16A, Make-Cona, Anchor, Crabtree, V-Guard, Legrand, Goldmedal. |
| 39 | Cutting chases for concealed conduit wiring etc. and making good, cutting not exc 10 cm girth. |
| 40 | Material & Labour for cement concrete of type C2 (1:3:6) with 40 mm graded aggregate in making cable trenches for power cable. |
| 41 | Labour for excavating trenches in hard/dense soil not exceeding 1.5 m wide & not exceeding 1.5 m depth for laying of electrical power cable and getting earth out. |
| 42 | Labour for excavating trenches in hard/dense soil not exceeding 1.5 m wide & exceeding 1.5 m depth for earth pit construction and getting earth out. |
| 43 | Returning of excavated earth including spreading, levelling & well ramming. |
| 44 | Material & Labour for circuit/submain wiring alongwith earth wire with 2 x 4 Sq. MM + 1 x 4 Sq. MM Earth Wire of FR PVC Insulated copper conductor, single core cable inPVC conduit in recessed as required. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab, KEI, RR Cables. |
| 45 | Material & Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduitpipe for loop earthing etc. as required with 4mm dia galvanized iron wire. |
| 46 | Supplying & fixing of 8 Way double door, single pole neutral sheet steel MCB distribution board, 240 V, on surface/recess, complete with neutral bus bar, earth bus bar, din rail, powder painted including interconnection, testing & earthin etc. as required. It includes wall cutting & making good the same for fixing of above MCB distribution board. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 47 | Material & Labour for earthing with GI earth Pipe of 4.5 Meter Long, 40 MM Dia Including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.This also includes earth excavation, earth pit chamber construction and earth refilling. |
| 48 | Supply Installation, Testing & Commissioning of Solar Powered Street Light System with 8 Meters of single piece GI Pole consisting of 2 Nos. of30 Watt LED Street Light fittings in opposite orientation with Li-Ion/ Li- Ferrophosphate Battery. The thickness of base/lower portion of GI poleshall not be less than 2.5 mm. The brackets for fixing LED light fittings shall be of galvanised iron. The top of the GI pole shall have closed canopy as water can\" t enter inside the pole. The LED street light fittings shall be of reputed make like Phillips, Havells, Bajaj, Syska, Surya, Cropmton etc. |
| 49 | Supply, installation, testing & commissioning of sine wave 3 KVA Inverter with Suitable Trolley/ Rack for Batteries, Input Voltage-Single Phase, 230 V AC & Inverter Output Voltage-Single Phase, 230V AC, Protectiom- For Under Voltage, Short Circuit & Overload, Battery- 3 Nos. of 12V, 150/160 AH Lead Acid Battery ,Inverter shall be conforming to IS-16242-Part-1 or Latest & Battery shall be conforming to IS-13369 or any other Latest IS Standards, Make of Inverter- Luminous / Okaya / Exide/ Liv Fast/ MicroTek & Make of Battery- Okaya /Luminous /Exide / LivFast. |
AI Tender Summary
Tender Timeline
Jul 07, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 30, 2025
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 07, 2025
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 14, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender