|
| 1 | MASONRY WORKBrick work using fly ash bricks in cement mortar 1:5 (1 cement : 5 coarse sand) with bricks of class designation 40 kg / cm2 in superstructure upto floor five level : 230 x 110 x 80 mm |
| 2 | FLOORING AND FLOOR FINISHESEpoxy FlooringProviding and applying 3D epoxy flooringof 5 mm - including primer, basecoat and top coat. All complete as specified and as directed by the EngineerApplication of Primer Coat: This helps the epoxy adhere properly to the surface.Base Coat: The first layer of epoxy resin is spread to create a level surface. This also serves as the layer where the 3D image or design is placed.3D Image Layer: A printed 3D image or design is laid over the base coat. This layer is essential to create the 3D effect.Epoxy Top Coat: A clear, high-gloss top layer of epoxy resin is applied over the design to seal the image and provide protection. This coat adds a glossy finish, ensuring the image is visible and durable. |
| 3 | Epoxy FlooringProviding and applying epoxy flooring of 5 mm thickness, including primer, base coat, and top coat, as specified and directed by the Engineer. The process includes the following steps:Application of Primer Coat: The primer coat is applied to ensure proper adhesion of the epoxy resin to the surface, providing a solid foundation for the base coat.Base Coat: The first layer of epoxy resin is spread over the primer. This coat creates a smooth, level surface and forms the foundation for the top coat.Epoxy Top Coat: A clear, high-gloss top coat of epoxy resin is applied over the base coat to seal the surface, enhance durability, and provide a glossy, finished look. This top coat helps protect the flooring from wear, stains, and chemicals, ensuring long-lasting performance and an attractive appearance. |
| 4 | STEEL AND ALUMINIUM WORKProviding and fixing in position G.I. hand rail polyster powder coated in external passage, as per approved design shown in drawing including bending hand rail pipe to proper shape in curves with special etc. complete. |
| 5 | Modern Framed Glass Swing Gatea. Glass Type:Material: Toughened Glass (Tempered Glass).Thickness: 12mm (for durability and safety).b. Frame:Material: Powder-coated mild steel or aluminum.Frame Color: Matte black powder coating.Thickness: Frame thickness of 1.5mm to 2mm for stability.Design: Double doors with a clean, minimal design (standard or custom).Hinges: Heavy-duty stainless steel or brass hinges designed to carry the weight of the glass (using brands like DORMA or VVP).c. Door Configuration:Type: Double swing door (can open both inwards and outwards).Locking Mechanism:Type: Mortise lock or magnetic lock for secure closure.*Refer Sr. No 1from Drawings with Specifications |
| 6 | Tensile Roof StructureSupply, fabrication, and installation of tensile roof comprising PVC-coated fabric (white color, 5–8 mm thickness) supported on mild steel poles with pole-fitted connections. The system shall be weather-resistant, UV-stable, and suitable for outdoor applications such as shops, terraces, and open areas. Complete with all necessary fittings, accessories, and supports for a fully functional and secure installation.*Refer Sr. No 2from Drawings with Specifications |
| 7 | PLASTERING AND FINISHING WORKPainting one/ twomore coats with ordinary ready mixed paint of approved brand & manufacture in all shades except white or green on old work to give an even shade. |
| 8 | Internal wall - 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 9 | White washing with lime on new work ( three or more coats) to give an even shade. |
| 10 | Wall painting (two or more coats) with plastic emulsion of approved brand and manufacture on new work to give an even shade. |
| 11 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 12 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 13 | DISMANTLING DEMOLITION & REPAIR WORKDismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 14 | Interior Wall - Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead : With cement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | Dismantling the tile workin floors and roofslaidin cement including stacking of materials within50 meters lead for thickness of tiles 10mm to 25mm. |
| 16 | Dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead. |
| 17 | ELECTRICAL WORKSupplying and fixing of following sizes ofrigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) includingcutting the wall and making good the same in case of recessed conduit as required(a) 20 mm |
| 18 | Supplying and fixing of following sizes ofrigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) includingcutting the wall and making good the same in case of recessed conduit as required(b) 25 mm |
| 19 | Supplying and fixing of following sizes ofrigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) includingcutting the wall and making good the same in case of recessed conduit as required(c) 32 mm |
| 20 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit(heavy)of appropriate size as required.(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 21 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit(heavy)of appropriate size as required.(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 22 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit(heavy)of appropriate size as required.(d) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm Conduit) |
| 23 | Supplying and fixing following modularswitch/ socket on the existing modular plate and switchboxincluding connections but excluding modular plate etc. as required(a) 5/6 A switch Cat A |
| 24 | Supplying and fixing following modularswitch/ socket on the existing modular plate and switchboxincluding connections but excluding modular plate etc. as required(c) 15/16 A switch Cat A |
| 25 | Supplying and fixing following modularswitch/ socket on the existing modular plate and switchboxincluding connections but excluding modular plate etc. as required(d) 3 pin 5/6 A socket outlet Cat A |
| 26 | Supplying and fixing following modularswitch/ socket on the existing modular plate and switchboxincluding connections but excluding modular plate etc. as required(e) 6 pin 15/16 A socket outlet Cat A |
| 27 | Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/1200/ 1400 mm. sweep, complete erected on provided switch board. |
| 28 | Supplying and fixing following size modular GI box alongwithmodularbase and cover plate for modulator switchesin recess etc. as required(a) 1 or 2 Module ( 75 mm x 75 mm) Cat A |
| 29 | Supplying and fixing following size modular GI box alongwithmodularbase and cover plate for modulator switchesin recess etc. as required(b) 4 Module ( 125 mm x 7 mm) Cat A |
| 30 | Supplying and fixing following size modular GI box alongwithmodularbase and cover plate for modulator switchesin recess etc. as required(c) 6 Module (200mm x 75 mm) Cat A |
| 31 | Supplying and fixing following size modular GI box alongwithmodularbase and cover plate for modulator switchesin recess etc. as required(d) 8 Module ( 125 mm x 125 mm) Cat A |
| 32 | Supplying and fixing following size modular GI box alongwithmodularbase and cover plate for modulator switchesin recess etc. as required(e) 12 Module (200 mm x 150 mm) Cat A |
| 33 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates,suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A-- with Cat A Modular Accessories |
| 34 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with 2 way modular switch, modular plates,suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.: with Cat A Modular accessories |
| 35 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium)and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 36 | Supply and erecting of bulkhead luminaire suitable for CFL lamp complete with all accessories including 1 No 9/10 W CFL lamp.: Cat A |
| 37 | Supply of 4 feet 36/40 W single decorative type fluorescent luminaire with electronic ballst complete with all accessories including 4 feet 36/40 W fluorecent tube. : Cat A |
| 38 | Supplying and erecting CRCA powder coated light LED fitting (4 feet) Max. 33W with high transitivity diffuser with system lumens output of Min. 4000 lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 , IP20 rated including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 39 | Supply and erecting of 56 inch (1400mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. : Cat A |
| 40 | Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required. |
| 41 | Supplying and fixing 6 A to 32 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.: SP, Cat B |
| 42 | Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) 2 + 12 way Cat A |
| 43 | Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA inthe existing MCB DB complete with connections testing and commissioning etc as required, (b) 40 A, Cat A |
| 44 | Supply of3 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 10 sq.mm |
| 45 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe,etc.complete as required |
| 46 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required (g) TV Antenna socket outlet |
| 47 | HVAC WORKSupplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC |
| 48 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall : 25mm outer dia. |
| 49 | Supplying and erecting slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as perdirections by the site engineer. |
| 50 | Providing annual comprehensive maintenance contract for 1.5 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material. |
| 51 | Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. |
| 52 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 53 | Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater /AC system. |
| 54 | INTERIOR AND FURNITURE WORKSide trolley (ST)Supply and instalation of side trolley made of high-quality engineered wood, dimensions 635mm (L) x 505mm (D) x 600mm (H), consisting of 4 bays with 2 internal divisions per bay. The unit shall be surface finished with high-pressure laminate (HPL) surface of 1 mm thick of approved make and approved colour on all the sides including the edges and PVC edge banding with rounded corners for safety and durability. Allmaterialshallbeas per approved make and colour. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 3 from Drawings with Specifications |
| 55 | HEXAGON OTTOMAN (O1)Supply and placement of hexagon-shaped ottoman with dimensions 550mm (W) x 520mm (D) x 350mm (H), upholstered in Kollam fabric known for its durability and soft texture. The ottoman shall feature a sturdy internal frame for long-lasting support and SPFT (Soft Plush Foam Technology) for enhanced seating comfort. Offered in a range of color options to suit interior decor. Allmaterialshallbeas per approved make and colour. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 4 from Drawings with Specifications |
| 56 | TRAPEZIUM TABLE MOBILE (T2)Supply and installation of table with overall dimensions 1127mm (W) x 520mm (D) x 580mm (H), featuring a tubular steel frame constructed from round steel tubes, finished with epoxy powder coating for corrosion resistance. The tabletop is made of panel board with high-pressure laminate (HPL) surface of 1 mm thick of approved make and approved colour on all the sides including the edges and PVC edge banding with rounded corners for safety and durability. The base includes glides made of ABS/nylon for smooth placement and floor protection.Allmaterialshallbeas per approved make and colour. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 5 from Drawings with Specifications |
| 57 | RIVIERA TABLE (T3)Supply and installation of Riviera Table with overall dimensions 1200mm (W) x 665mm (D) x 720mm (H). The table features a tubular steel frame fabricated from round steel tubes, finished with epoxy powder coating for enhanced durability and corrosion resistance. The tabletop is made of panel board with a high-pressure laminate (HPL) surface and PVC edge banding with rounded corners for safety and durability. The table is supported on ABS/nylon glides for floor protection and easy adjustment. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 6 from Drawings with Specifications |
| 58 | PENTAGON OTTOMAN (O2)Supply and placement of Pentagon Ottoman with dimensions 550mm (W) x 520mm (D) x 350mm (H). The ottoman shall be upholstered in Kollam fabric, noted for its durability and soft feel. It includes a sturdy internal frame to ensure long-lasting support and is fitted with SPFT (Soft Plush Foam Technology) for enhanced seating comfort. Offered in a variety of color options to suit different interior design schemes. Allmaterialshallbeas per approved make and colour. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 7 from Drawings with Specifications |
| 59 | SINGLE SIDED SHELVING (SS1)Supply, fabrication, and installation of Single Sided Shelving Unit with overall dimensions 10500mm (L) x 600mm (D) x 1200mm (H), comprising 5 bays with 5 divisions per bay. The unit includes an integrated cantilevered display surface measuring 450mm x 1000mm, projecting from the main storage structure for enhanced product visibility.The unit shall be surface finished with high-pressure laminate (HPL) surface of 1 mm thick of approved make and approved colour on all the sides including the edges and PVC edge banding with rounded corners for safety and durability. Shelving shall be constructed from durable materials with a stable finish, designed for functional display and storage use. Allmaterialshallbeas per approved make and colour. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 8 from Drawings with Specifications |
| 60 | Standing table podium (PD)Supply and installation of Standing Table Podium with overall dimensions 457mm x 457mm x 1219mm (H). The unit features a metal body with a smooth finish, supported by a round base and a curved vertical support for aesthetic appeal and structural stability. Designed for use in presentation or reception areas. Allmaterialshallbeas per approved make and colour. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 9 from Drawings with Specifications |
| 61 | Full Glass Partition(3000mm height):Supply and installation of temporary full-height glass partition with a total height of 3000mm, including required framing. The partition shall consist of 6mm thick clear toughened glass, with an opaque film applied up to 1200mm height from finished floor level, and clear glass above 1200mm up to 3000mm. Framing to be in powder-coated aluminum or approved equivalent, ensuring stability and clean aesthetics. Allmaterialshallbeas per approved make. All works shall be complete in all respects as per the technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 10 from Drawings with Specifications |
| 62 | 3M Wall Graphics Supply, digital printing, and application of 3M Envision 48C Wall Graphics on interior building wall surfaces. The film shall be non-PVC, environmentally preferred, and digitally printed as per approved artwork. Applied over putty-finished, smooth interior walls, ensuring proper surface preparation for optimal adhesion. Graphics to have a durability of 5–8 years for indoor use, maintaining visual quality and adhesion over time. Complete in all respects as per manufacturer’s guidelines and project design intent. Allmaterialshallbeas per approved make. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.) |
| 63 | Indoor PlantsSupplying and fixing in position approved artificial Green Plant with PVC pot (Pot size around 400mm dia x 600mm height ). All the materials shall be of approved approved variety andsourced from brands such as Ugaoo, Kyari, or equivalent. All works complete as per the drawing, specification, image and direction of the Engineer. Plants shall be healthy, pest-free, and suited for indoor environments, provided in appropriate planters as per design intent. Placement to be carried out as per layout and instructions. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 11 from Drawings with Specifications |
| 64 | PINUP BOARDSupply and installation of pinup board with dimensions 1200mm (H) x 2400mm (W), comprising a fabric-covered surface with wood edge binding for a neat finish. The board shall be 12mm thick soft board with blazer cloth top fixed in frame with clip fitting and shall be securely fixed to the wall using holdfasts and all necessary fittings with all stainless steel hardwares , ensuring durability and ease of use. Allmaterialshallbeas per approved make. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.) |
| 65 | Glass Cubicle - 118 ft x 10ftSupply, fabrication, and installation of glass cubicle partition measuring 118 feet (L) x 10 feet (H), using a structural frame made of powder-coated mild steel or aluminum, with a thickness ranging from 2mm to 3mm. Finish to be matte or glossy, and color options include black, white, or silver, as per approved office design aesthetics.The partition shall be fitted with tempered/toughened glass of 8mm to 10mm thickness, offering strength, durability, and safety. Glass edges to be polished or beveled for smooth, finished detailing. Glass type may be clear, frosted, or tinted, depending on specified transparency or privacy requirements.Allmaterialshallbeas per approved make. All works shall be complete in all respects including structural supports, sealing, anchoring, and final finishing as as per the technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 12 from Drawings with Specifications |
| 66 | TV STAND (TS)Supply and installation of TV stand with overall dimensions 600mm (W) x 450mm (D) x 1220mm (H), featuring adjustable height and tilt functionality (+10° / –10°) for optimal viewing angles. Constructed with sturdy and durable materials suitable for regular movement and handling. The unit shall be portable, equipped with four smooth-rolling wheels for ease of relocation. Allmaterialshallbeas per approved make. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 13 from Drawings with Specifications |
| 67 | High Table (T1)Supply and installation of High Table with overall dimensions 600mm (L) x 650mm (W) x 1200mm (H). The table shall consist of a durable metal frame with a wooden tabletop, offering a sturdy and stable surface suitable for high-use environments. Finish and color to be as per approved design intent.Allmaterialshallbeas per approved make. All works shall be complete in all respects including fabrication, delivery, and installation as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 14 from Drawings with Specifications |
| 68 | BEAN BAG (BB)Material: artificial leather, cotton, and polyester. Filling: Filled with thermocol beads, microbeads, or shredded foam. Shape and Design: Teardrop (Available in round and square shape as well)Size: 700 mm diameter bean bag is suitable for medium to large-sized individuals and can comfortably accommodate one person. Allmaterialshallbeas per approved make and colour. All works shall be complete in all respects as per the drawing/ Image, technical specification and direction of the Engineer.(PleaseNote:therateshouldbeinclusiveofcontractorprofit,loading&unloading charges, transportation charges, assembling charges including lead and lift of 100m but excluding cost of GST.)*Refer Sr. No 15 from Drawings with Specifications |
| 69 | DIY STEM MATERIAL\"Physics Experiment Setup (for class 6th to 12th)7 in 1 Kit A - Colour Shadow, Newton\"s Disc, Standard Time Indicator, Day and Night Model, Sundial, Light Travels in Straight Line, Periscope\"7 in 1 Kit B - Corner Mirror Magic, Laws of Reflection of Light, Kaleidoscope, Fun Mirrors, Concave & Convex Lens, Energy Conservation, Bernouli\"s Principle5 in 1 Kit - Electromagnetic Induction, Heat Conduction in Metals, Density of Liquids, Electromagnet, Parallel and Series Circuits\"Electronics Starter Experiment Setup (for class 6th to 12th)5 in 1 Kit - Two Way Switch, Electronic Bell, Traffic Light System, Simple LED Blinking Circuit, Smart Doorbell\"\"Biology Experiment Setup (for class 6th to 12th)5 in 1 Kit - Plant Growth Model, Human Respiratory Model, Heart Pump Model, Photosynthesis, Food Chain Model\"\"Mathematics Setup (for class 6th to 12th)5 in 1 Kit - (A+B)2 Theorem, (A-B)2 Theorem, Pythagoras Theorem, Area of Circle, Volume of Cylinder\"\"3D Artwork Kit (for class 6th to 12th)Prototyping Models, Geometric Shapes, Biology Models, Historical Artifacts, Custom Stencils and more\"\"Inventor & Space RoboticsKit - Basic (for class 6th to 12th)Inventor Robotics Kit - Programming & Coding, Wearable Technology, Robotics, Games & Interactive Media, Environmental Monitoring\"Space Robotics Kit - Rocket Propulsion Systems, Telemetry & Data Transmission, Basic Communication Displays\"STEM Kit (for class 6th to 12th)3 in 1 Basic Kit - The 3 in 1 basic STEM kit is a versatile and educational toy designed to engage children in the principles of science, technology, engineering and mathematics.\"3 in 1 Basic Kit - The 3 in 1 basic STEM kit is a versatile and educational toy designed to engage children in the principles of science, technology, engineering and mathematics. |
| 70 | \"Physics Experiment Setup (for class 8th to 12th)3 in 1 Kit - Sound Waves, Projectile Motion, Friction\"\"Electronics Advanced Setup (for class 8th to 12th)5 in 1 Kit - Temperature Sensor, Water Level Indicator, Electric Fan Model, Breadboard Circuit Design, Solar Power Model\"\"Biology Experiment Setup (for class 8th to 12th)5 in 1 Kit - Digestive System Model, Water Cycle Model, Muscle and Bone Model, Blood Flow Model, Cell Structure Model\"\"Adavanced Maths Concepts (for class 8th to 12th)5 in 1 Kit - Probability Spinner, Factorization Model, Golden Ratio Model\"\"Inventor & Space Robotics Kit - Advanced (for class 8th to 12th)Inventor Robotics Kit - Robotics, Home Automation, Wearable Electronics, Sensor Applications, Data Logging & Analysis\"Space Robotics Kit - Make your own mini satellites with IoT Dashboard - 10+ Projects\"STEM Kit (for class 8th to 12th)Basic Kit - The 5 in 1 kit helps create 5 different types of assembly projects.\"Advanced Kit -The 5 in 1 kit helps create 5 different types of assembly projects.\"Digital Learning Centre LiscenceLicense Access to Digital Learning platform for tutorials, books and reference materials\"\"ConsumablesConsumables for 1 Year\" |
| 71 | AR / VR EQUIPMENTS & CONTENTSVirtual Reality Headset ( 5 Units)6 GB RAM, 128 GB Internal Storage, Qualcomm Snapdragon XR1 or above,4000mAh or above, LCD, 1280 x 1440 per eye or higher,Bluetooth Version: Bluetooth 4.2 WLAN: WLAN 802.11 b/g/n/ac USB: Micro USB Audio: 3.5mmVirtual Reality Content Yearly License (5 years)At Least 450 educational VR topics pre-loaded in the headset mapped to curriculum for classes 3rd to 12th out of which at least 100 VR topics each in Science, Social Science & Mathematics,All VR topics should be interactive, offering learning interactions such as drag and drop, explore, assemble, dissect, experiments etc. Video Based content will not be considered,Grade 3- 12th, NCERT/CBSE Curriculum Aligned Interactive Content (not videobased) Science (Physics, Chemistry, Biology), Maths, Social Science (History and Geography),Tablet for Teacher Control App (Single Unit)4 GB RAM, 64 GB Internal Storage,Android 11 or Higher, 1920 x 1200 or Higher, Micro USB / Type - C, 802.11 b/g/n/ac 2.4GHzStorage with Simultaneous Charging FacilityFor safe storage of VR devices and Simultaneous ChargingInstallation & TrainingInstallation of the required equipment,Training for Students & TeachersAR / VR Pod (1 Unit)self-contained unit that uses augmented reality (AR) and virtual reality (VR) to create an immersive experience,1 Seater VR Pod, Product Dimension- 100 x 100 x 100 or above,Playing time - 2 min or aboveWarranty: 3 years |
| 72 | EXPERIENCE ZONELive Experience• Self Operating & Self Running Systems• Contrallable thru Tablet/Kiosk thru Suitable Interface• Cover all components of STEM• Documentation: Installation Guide, Operating Manual• Atleast 2 Charts Explaining the Operation• Sample Experiences given below. Final list to be defined with ITG Helpa) Piezo Mat (*Refer Sr. No 16.01 from Drawings with Specifications)b) Electro Magnetic Train (*Refer Sr. No 16.02 from Drawings with Specifications)c) Waste Water Treatment Plant (*Refer Sr. No 16.03 from Drawings with Specifications)d) Heart Function Model (*Refer Sr. No 16.04 from Drawings with Specifications)e) 3D Printer with Design Support (*Refer Sr. No 16.05 from Drawings with Specifications)f) Writing Robotic Arm (*Refer Sr. No 16.06 from Drawings with Specifications)g) Wind Power Generator (*Refer Sr. No 16.07 from Drawings with Specifications)h) Agriculture Drip Irrigation (*Refer Sr. No 16.08 from Drawings with Specifications)i) Self-Balancing Robot (*Refer Sr. No 16.09 from Drawings with Specifications) |
