Bids Are Invited For 1 SCHEDULE-4 69190102 153601200029 DEMISTER PAD,90V03,COLUMN INTERNALS Demister Pad with Grid for 90V03, 3000 OD x 300 thk, Size : 3000 mm OD x 300 mm thk, MOC : SS316, Pad Density : 144 Kg/Cu M, Wire Dia : 32 Swg, As per UOP spec 3-35 , style A, Grid Flats : 25 mm width x 6mm thk , 6 mm dia rods, Fixing System : tie wire type. as per UOP spec 3-266, Along with spacer pipe, bolts, nuts & washers for fixing the demisters. Manway Size= 24, Suitably oversized to ensure snug fit in the vessel, As per Drawing no MNT/TPD/Demister/90V03, Vessel : 90V03 - Separator 90V03 EA 1 2 SCHEDULE-4 69190104 153601200028 DEMISTER PAD,90V04,COLUMN INTERNALS Demister Pad with Grid for 90V04, 4200 OD x 300 thk, Size : 4200 mm OD x 300 mm thk, MOC : SS316, Pad Density : 144 Kg/Cu M, Wire Dia : 32 Swg, As per UOP spec 3-35 , style A, Grid Flats : 25 mm width x 6mm thk , 6 mm dia rods, Fixing System : tie wire type. as per UOP spec 3-266, Along with spacer pipe, bolts, nuts & washers for fixing the demisters. Manway Size= 24, Suitably oversized to ensure snug fit in the vessel, As per Drawing no MNT/TPD/Demister/90V04, Vessel : 90V04 - Flash Drum 90V04 EA 1 3 SCHEDULE-4 69190106 153601200027 DEMISTER PAD,90V06,COLUMN INTERNALS Demister Pad with Grid for 90V06, 1700 OD x 150 thk, Size : 1700 mm OD x 150 mm thk, MOC : SS316, Pad Density : 144 Kg/Cu M, Wire Dia : 32 Swg, As per UOP spec 3-35 , style A, Grid Flats : 25 mm width x 6mm thk , 6 mm dia rods, Fixing System : tie wire type. as per UOP spec 3-264, Along with spacer pipe, bolts, nuts & washers for fixing the demisters. Manway Size= 24, Suitably oversized to ensure snug fit in the vessel, As per Drawing no MNT/TPD/Demister/90V06, Vessel : 90V06 - Recycle Gas Suction KO drum 90V06 EA 1 4 SCHEDULE-4 69190162 153601200031 DEMISTER PAD,90C02BTM,COLUMN INTERNALS Stationary Equipment,Distillation column internals, Demister Pad with Grid, 90C02 Bottom Demister Demister Pad with Grid for 90C02 Bottom Demister Size : 900 mm dia x 150 mm thk MOC : SS316 Pad Density : 144.2 Kg/Cu M Wire Dia : 0.28 mm Grid Flats : 25 mm width x 3mm thk flat, 6 mm dia rods Demister Pad with Grid, tie wires/rods and I bolts / J-bolts for fixing. Manway Size = 18 Inch Suitably oversized to ensure snug fit in the vessel As per Drawing no VR-90-C-02-0012 (GAD), HPCL-VR/MNT/TPD/STD-DRG/DMSTR/90-C-02/Bottom/01 & 02 (2 nos drg) Vessel : 90C02 - Gas Scrubber 90C02 EA 1 5 SCHEDULE-4 69190164 153601200030 DEMISTER PAD,90C02TOP,COLUMN INTERNALS Stationary Equipment,Distillation column internals, Demister Pad with Grid, 90C02 Top Demister Demister Pad with Grid for 90C02 Top Demister Size : 900 mm dia x 150 mm thk MOC : SS316 Pad Density : 144.2 Kg/Cu M Wire Dia : 0.28 mm, Grid Flats : 25 mm width x 3mm thk , 6 mm dia rods Demister Pad with Grid, tie wires/rods and I bolts / J-bolts for fixing. Manway Size = 36 Inch Suitably oversized to ensure snug fit in the vessel As per Drawing no VR-90-C-02-0012 (GAD), HPCL-VR/MNT/TPD/STD-DRG/DMSTR/TOP/01 Vessel : 90C02 - Gas Scrubber 90C02 EA 1 6 SCHEDULE-4 69190158 153601200063 DEMISTER PAD,F/93-V-01 Design n supply of Demister pad for 93-V-01 Vendor shall design and supply demister pad with grid of 93-V-01 as per attached drawing (02 nos) and process datasheet. Demister Pad thickness- 150 mm thk Material - SS304L Demister pad shall be capable of removing particles upto 5 microns. Demister Pad with Grid, tie wires/rods and I bolts / J-bolts for fixing. Manway Size = 24 Inch As per Drawing (2 nos ) VR-93-V-01-0002 (Sheet 1 of 5 and 2 of 5) and Process datasheet No IP041-93-V-01-DS rev 5 Vessel: 93-V-01 : Rich Amine Flash Drum with Scrubber Note:- Number of pieces of demister shall suit to dimension of the top flange of the scrubber in the vessel (for proper erection) and loading Rate Payable: Rate Payable is per single set of demister supplied. 93-V-01 EA 1 7 SCHEDULE-4 69190168 153601200060 DEMISTER PAD,93V02,VESSEL INTERNALS Stationary Equipment, Vessel Internals, Demister pad for 93-V-02 Vendor shall supply demister pad with grid of 93-V-02 as per attached drawing 93-V-02-0003 (1 of 2) & 93V02/005 Details: Size: 1600 mm dia , Thk (As per drawing) Demister Pad with Grid, tie wires/rods and I bolts / J-bolts for fixing to be supplied. MOC: SS316L Model Yorkmesh style 326 or equivalent Max Pressure drop 25mm WC Demister pad shall be capable of removing particles upto 10 microns. Grid Material: SS 316L Demister Pad with Grid, tie wires/rods and I bolts / J-bolts for fixing. Manway Size = 24 Inch Vessel: 93-V-02 : Regenerator Reflux Drum Rate Payable: Rate Payable is per single set of demister supplied. 93-V-02 EA 1 8 SCHEDULE-4 69190160 153601200061 DEMISTER PAD,W/ GRID,94C01 Design n Supply of Demister pad with grids of 94-C-01 Vendor shall design & supply demister pad with grid of 94-C-01 as per attached drawing 94-C-01-0007 Details: Size: 1600 mm dia, 150 mm thk MOC: SS316L Grid Material: SS 316L Demister Pad with Grid, tie wires/rods and I bolts / J-bolts for fixing. All internals should pass through Manway ID = 450 mm Pad will be oversized suitably for tight fit in vessel. Vessel: 94-C-01 - Fuel gas amine absorber Rate Payable: Rate Payable is per single set of demister supplied. 94-C-01 EA 1 9 SCHEDULE-4 69190166 153601200059 DEMISTER PAD,94V03,VESSEL INTERNALS Stationary Equipment, Vessel Internals, Demister pad for 94-V-03 Vendor shall supply demister pad with grid of 94-V-03 as per Special Note H in the attached drawing 94-V-03-0003 (1 of 5) & 94V03/003 Details: Demister Style: Mesh Pad Demister Pad with Grid, tie wires/rods and I bolts / J-bolts for fixing to be supplied. MOC: SS 316L Dimensions: 670mm , Thk. 150 mm (as per drawing) Max Pressure drop 0.0025 kg/cm2 Particle Size: 10 Microns Fluid handled: Sour fuel gas Vapour Viscosity: 0.0109 CP Vapour Flowrate: 2002 Kg/hr. Vapour Density: 5.92 kg/m3 Liquid Density: 700-800 kg/m3 Liquid Surface Tension: approx 18-20 dyne/cm Manway Size = 20 Inch Vessel: 94-V-03 : Sour fuel gas KOD Rate Payable: Rate Payable is per single set of demister supplied. 94-V-03 EA 1 10 SCHEDULE -1 29110234 153601200002 DEMISTER PAD,14V11,COLUMN INTERNALS Equipment Number: 14-V-11A, Equipment Service: Fuel Gas Drum, Vessel inside Diameter (mm): 1376. VAPOUR CONDITIONS: Operating Pressure (Kg/ Cm2): 4-5, Operating Temperature (Deg C): 40-55, Vapour Flow rate (Kg/HR) AM/BH: 8000-25000, Vapour Density (Kg/M3) @ 10 degC: 5.098, Vapour Viscosity CP @ 10 degC: 0.0109, Vapour Molecular Weight: 25.365. LIQUID CONDITIONS: Droplet size (Range), Microns: 5 and Above, Liquid Density Kg/M3: 974, Liquid viscosity, CP: 0.8284, Surface tension, Dynes/CM 63.7 DEMISTER DESIGN DATA / PERFORMANCE: No.of demister pads: one(4 Segments, accessibility through 20 manway), Size of Demister (mm): 1374, Demister Thickness (mm): 150, Bulk Density144 Kg/M3, Surface Are-284 M2/M3, Free Volume-98.2%, Wire Dia-D28mm(32SWG) Material of construction: SS304 Design Pressure, Kg/ Cm2: 9, Design Temarature, Deg.C: 150, Separation Efficiency (%): 99, Max. Allowable Pressure Drop (mm WC): 20, Accessibility to Demister: 18 NB, Grid: SS304, Fastners: SS304. Attachments:Data Sheet 14-V-11A
