Replacement Of 01 No. Emergency Gate And 01 No. Service Gate(Well) Of Left Hr And 01 No.Right Hr Gate Of Krushnasagar Mip In Ghosani Block Under Mi Division,Gajapati,Paralakhemundi For The Year 2024-25
Tender Value
6.02 Lakhs
Estimated cost
Bid Submission
11 Jun 2025
0 days left
EMD
6100
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
parlakhemundi → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Replacement Of 01 No. Emergency Gate And 01 No. Service Gate(Well) Of Left Hr And 01 No.Right Hr Gate Of Krushnasagar Mip In Ghosani Block Under Mi Division,Gajapati,Paralakhemundi For The Year 2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Structural steel/rolled steel materials for Embedded parts consisting of sill beam, wall liners & track base,top seal base,vertical lift sliding Gate leaf consisting of skin plate, Horizontal girders, End vertical girders, stiffeners, seal flats, lifting brackets, pad bases,Steel hoist bridge for single stem Nut type screw gear box hoist consisting of supporting beams, cross beams, base plates, anchor bolts, stiffeners, chequered plates,etc. including consumables all complete as per specification and approved drawings with all lead and lifts as per direction by the Engineer-in-charge including cess,contractor profit. |
| 2 | Supply of Stainless steel materials for sill beam S.S seal seat, S.S track, S.S side seal seat, top seal base SS seal seat etc all complete as per specification and approved drawings with all lead and lifts as per direction by the Engineer-in-charge including cess and contractor profit. |
| 3 | Fabrication cost of embedded parts & 1st stage embedments, studs, nuts, bolts, vertical lift sliding Gate leaf,Steel hoist bridge etc, with all accessories including machinery, fixtures, labour, cutting, alligning, welding, cleaning, drilling and boring, finishing, including consumables, all complete as per specification and approved drawings with all lead and liftsof 1550.36KG as per direction by the Engineer-in-charge including cess and contractor profit . |
| 4 | Cost of Erection, positioning, aligning, fixing, trial and commissioning including unloading and shifting up to location of all components of 1st stage and 2nd stage Embedded parts, Vertical Gate leaf, Steel hoist bridge assembly with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, handling and rehandling all complete as per specification and drawings with all lead and lifts required at the erection site including cess,contractor profit. |
| 5 | Painting of all structural components including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paint of 100 micron each, all inclusive of labour, materials and consumables as per relevand IS code specifications and drawing with all lead & lifts including cess,contractor profit. |
| 6 | Bolts, Nuts, studs, washers etc |
| 7 | Bronze pad |
| 8 | Lifting pin |
| 9 | Bottam rubber seal |
| 10 | Dia 32 Side seal |
| 11 | Anchor bars |
| 12 | dia 63 screw rod with square thread |
| 13 | dia 63 round rod |
| 14 | Nut type screw Gearbox assembly suitably square threaded for 63mm dia screw rod all inclusive of cost of material,cost of thrust bearing,machining & assembly charges. |
| 15 | Restraing arrangement bush id 63mm thickness & length 200mm aluminium bronze all inclusive of materials,machining as required & as specified in drawing |
| 16 | Dia 200mm & 12mm thickness MS flange coupling for coupling of plain stem rod with screw rod all inclusive of cost of material,fabrication,etc |
| 17 | operating handle |
| 18 | greese & gear oil |
| 19 | Concrete cutting,2ⁿᵈ stage concreting ,coffer dam,dewatering,watch & ward,vent cleaning,dismantling of old gates includingcontractor profit & labour cess. |
| 20 | Transportation of above said half-finished materials, generator, welding transformer,.derrick & other T&p, from workshop to worksite to & fro around 280 km. |
AI Tender Summary
Tender Timeline
Jun 02, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 11, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 12, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender