|
| 1 | Schedule A Part-I (BUILDING WORK )Note:1. This Schedule is pre priced by MES and the pre priced rate indicated under Col 5 signifies this fact only.Note: 2. Before quoting rate contractor is required to visit the site to ascertain the quality and quantity of work/ balance work / left over job. No claim shall be entertained after quoting of rate and rate quoted shall be final and binding. |
| 2 | Construction and completion of Left over work of block of building (Four storied) for mounting Radar with Ops and technical equipment, framed structure with RCC roof including rampsand plinth protection complete all as specified and shown on drawings For reference RefAppendix \"A1\"Note: Before quoting rate contractor is required to visit the site to ascertain the quality and quantity of work/ balance work / left over job. No claim shall be entertained after quoting of rate and rate quoted shall be final and binding. |
| 3 | Construction and completion of Left over workof Septic tank for 25 users complete all as specified and as shown on drawings and as directed.Note: Before quoting rate contractor is required to visit the site to ascertain the quality and quantity of work/ balance work / left over job. No claim shall be entertained after quoting of rate and rate quoted shall be final and binding. |
| 4 | Construction and completion of Left over workof Soakage well 3.0 mtr dia and 4.5 mtr deep complete all as specified, shown on drg and as directed.Note: Before quoting rate contractor is required to visit the site to ascertain the quality and quantity of work/ balance work / left over job. No claim shall be entertained after quoting of rate and rate quoted shall be final and binding. |
| 5 | Total amount ofSchedule \"A\" PART-I (BUILDING WORK) |
| 6 | Total amount ofSchedule \"A\" PART-II (Section-I) List of work and price cost for fire point |
| 7 | SCH \"A\" PART-II ( SECTION-II): LIST OF WORKS AND PRICE FOR FIRE FIGHTINGNote : This schedule is not pre priced by MES and the pre priced rate indicated as \"Rs. 0.00\" under Col.5 signifies this fact only. |
| 8 | Mild steel plain black sheet 4mm thick in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nail or rivets etc, fixed to steel framing with plain 40mm lap joints with rivetd or welded seams, including, bending or turning up, mitred angles etc., complete all as specified and as directed by Engineer-in- Charge. |
| 9 | Total amount of SCH \"A\" PART-II (Section-II) List of work and price cost for fire point |
| 10 | SCH \"A\" PART-III : LIST OF WORKS AND PRICES FOR HARDSTANDING |
| 11 | SCH \"A\" PART-IV : LIST OF WORKS AND PRICES FOR SEWAGE DISPOSAL |
| 12 | SCH \"A\" PART-V( SECTION-I): LIST OF WORKS AND PRICE FORFOR EXTERNAL ELECRIFICATION |
| 13 | SCH \"A\" PART-V( SECTION-II): LIST OF WORKS AND PRICE FORFOR EXTERNALL ELECRIFICATIONSUPPLYNote : This schedule is not pre priced by MES and the pre priced rate indicated as \"Rs. 0.00\" under Col.5 signifies this fact only. |
| 14 | Supply, install, commissioning and testing of diesel engine driven Generating set of 12 KW/15 KVA output at NTP, 415 volts, 50 C/S, AC 3 phase 4 wire at power factor of 0.8 lagging all over as per IS 4272/2001, mounted on common base plate and directly coupled through flexible coupling to diesel engine with cushy foot mountings (anti vibration) pad in and including acoustic insulated enclosure/canopy with 75 db noise level at 01 metere distance from DGset, complete with self starting system including accessories, equipment control panel etc as detailed below. (a)Alternator : (brush less) shall be designed for an output of 15 KVA at full load at continuous rating at 0.80 PF AC 3 phase 4 wire 415 volts 50 C/S, self excited, self regulated, screen protected drip proof type with two and shield ball/roller bearingwith damper winding in each poll faces as per IS 4722 or BS 2613-1970 all specified and directed Make Kirloskar/Crompton/Stamford (b) Diesel Engine: Deisel Engine Air cooled and electric start suitable to drive above alternator independently, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 RPM industrial type as per BS-649 or IS 1601 with A1 electronic governor suitable to regulate speed of DG set from No load to Full load complete with fueltank of Capacity as per manufacturer recommendations, fuel line, exhaust pipe duly insulated with asbestos rope and with support and silencer mufflers etc for continuos operation and standard accessories, sump pre heater all specified and directed. (c) Control panel : The standard control panel consisting of control cubical fabricated sheet steel construction indoor type suitable for mounting accessories multifunctional digital meter suitable for measuring of energy, power sector, frequency, voltage(0.500) volts and current including CT\"s suitable ratio within built selector switch, indicator lamp LED type, Hours Meter/RPM indicator, low oil pressure indication, overspeed indication and high water temperature indicator(d) Electric Starter Equipment : The equipment will comprise the following(i)Maint free battery duly initial charge of suitablecapacity and battery lead of adequate capacityMake : Amron/Lumnious/Sukam/Mico. (ii)Starter Motor(iii) Starter Gearing (iv)Start/Stop Push Button (v) Alternator/Dynamo of suitable capacity to charge the battery while DG Set in running complete with auto cut outall as per manufacturer recommendations. Make of DG Set: Sudir/Kirloskar Green. NotePCC foundation for DG set shall be as per manufacturer recommendation.. |
| 15 | Supply, installation , commisioning and testing LT panel indoor cubical floor mounted type made out of 1.6 mm thick MS sheet duly powder coated complete with bus bar 100 Amps rating made of aluminium strip duly drilled holes for connections and mounted on epoxy based post insulators for 3 phase 4 wire 415 volts 50 Hz power supply system suitable for and including the following:- (i) MCCB 40 Amps 4 pole 50 Hz 415 Volts with rupturing capacity 16 KA (ICS=100% ICU) -01 No as incoming conforming to cat part No 625326 of Legrand or equivalent of ( make L&T (D sine)Schneider/C&S(incoming).(ii)MCB 32 Amps 3 Pole 50 Hz 415 Volts with rupturing capacity 10KA(C Curve type) - 02 Nos as outgoing conforming to cat Part No 603288 of Make Legrand or equivalent Make of Hager/C&S/Schenider. (iii) Indicator set RYB 01 Set of 3 Pieces, LED Type.Make AE/L&T. (iv)Digital Volt Meter of size 96x96mm range30 to 600 volts of AE make or equivalentof make L&T with in built selector switch 01 set.(v) Digital Ammeter of size 96x96mm range0 to 50 amps of AE make or equivalent of make L&T with in built selector switch complete with CT\"sof appropriate ratio 01 Set.(vi) On load change over switch 415 volts 40 Amps 04 Pole 01 No. Make :-Crompton/L&T/Havells/Euroload. NoteAll accessories pre wired with suitable size of copper conductorcable/strip and suitable foundation as per manufacturer\"s recommendations. Make of Panel :DVEPL/Tricolite/Simon fabricaters/ElectricField. |
| 16 | Supply, fixing and testing street light fitting 70 watt metal halide 230 V single piece pressure die cast aluminium housing with step pot optics reflecter, IP65 ingress protection and built in tilt of toughened clear glass cover for lamp & control gear compartment confirming to cat pt No SGP301 1 xSON 70 W FG for lamp 1 x SONT 70W(E) of philips or equivalent make crompton/GE complete with lamp and PVC insulated sheathed flexible copper conductor cable of size 1.0 sqmm from DB to street light all as required and directed. |
| 17 | Supply and fix mounting bracket for street light bend to shape as per requirement made of 40mm bore medium garde GI tubing 1.2 mtr long and clamp, nut bolts all as required at site or directed. |
| 18 | Blank |
| 19 | Total amount of SCH \"A\" PART-V( SECTION-II |
| 20 | Total amount of SCH \"A\" PART-VI (SEC-I) : LIST OF WORKS AND PRICES FOR EXTERNAL WATER SUPPLY |
| 21 | SCH \"A\" PART-VI (SEC-II) : LIST OF WORKS AND PRICES FOR EXTERNAL WATER SUPPLYNote : This schedule is not pre priced by MES and the pre priced rate indicated as \"Rs. 0.00\" under Col.5 signifies this fact only. |
| 22 | Supplying, fixing and testingof mono block pump of capacity 1 HP 230 volts 50 HZ with all electrical connection and necessary PCC foundation as per manufacturer\"s instructions, complete all as specified and as directed.(Make:-Crompton/ABB/Kirloskar) |
| 23 | Total amount of SCH \"A\" PART-VI (SEC-II) |
| 24 | SCH\"A\" PART-VII (SEC-I): LIST OF WORKS AND PRICES FOR INTERNAL ELECTRIFICATION |
| 25 | SCH\"A\" PART-VII (SEC-II): LIST OF WORKS AND PRICES FOR INTERNAL ELECTRIFICATIONNote : This schedule is not pre priced by MES and the pre priced rate indicated as \"Rs. 0.00\" under Col.5 signifies this fact only. |
| 26 | Flourescent tube light fitting decorative Mirolta classic 1x40 watts complete with electronic ballast, with high power factor more than 0.9, concealed lamp holders, capacitor, connector block all accessories prewired with suitable size cable,conforming to Cat Part No. TMS 510 HF with end caps of make Philips or equivalent of make Bajaj/Crompton including 4\",1x40 watts tube rod and connecting electrically to ceiling rose using PVC insulated and over all sheathed flexible copper conductor cable of size 0.50 sqmm 3 core-all as required at site or directed. |
| 27 | Surface mounted CFL luminaire mirror lighting confirming to cat part No. TLN 11 of Crompton or equivalent of make Philips/Bajaj Complete with lamp including connecting electrically to ceiling rose using cord flexible 3 core PVC insulated overall sheathed flexible copper conductor of size 0.50 sqmm, all as required at - site and directed. |
| 28 | Socket for telephone with top Make: Cona cat Part No. 1756 or equivalent of make Leader/SSK. Complete with CI/MS sunk box with 3mm thick plastic laminated top sheet cover all as required and directed. |
| 29 | Heavy duty exhaust fan 5 star rated (as per BEE recommendation) 300mm sweep, single phase, 230 volts 50Hz AC supply, totally enclosed, heavy duty motor with die cast aluminium rotor mounted on two ball bearings, complete louvers including cutting chases for fixing fan, connecting electrically using 3 core 0.75Sqmm PVC insulated flexible copper conductor cable over all sheathed all as required at site or directed by Engr-in-Charge.Make:- Khaitan/Bajaj/Crompton. |
| 30 | Heavy duty exhaust fan 5 star rated (as per BEE recommendation) 380mm sweep, single phase, 230 volts 50Hz AC supply totally enclosed heavy duty motor with die cast aluminium rotor mounted on two ball bearings complete louvers including cutting chases for fixing fan, connecting electrically using 3 core 0.75Sqmm PVC insulated flexible copper conductor cable over all sheathed all as required at site or directed by Engr-in-Charge.Make:- Khaitan/Bajaj/Crompton. |
| 31 | Ceiling fan 5 star rated (as per BEE recommendation) of 1200mm sweep suitable to work on single phase AC 230 volts 50 Hz complete alongwith supply and fixing of electronic regulator step type hum free suitable to control speed of fan 0 to 100% of Model PENTA of make Anchor or equivalent of make crompton/Bajaj, connecting electrically to ceiling rose or connector block using PVC insulated and over all sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site or directed.Make:- Crompton/Khaitan/Bajaj. |
| 32 | Distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCB TPN as incommer and MCB SP as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link conforming to cat part No.607715 of Legrand or equivalent of make C&S/Merlin Gerin, complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site and directed by Engr-in-Charge. |
| 33 | Sheet metal enclosure MCB distribution board, double door with IP43 1K-09 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral Ink conforming to cat part No. 607711 of legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification. |
| 34 | MCB sinlge pole 240 volts 5 to 30 Amps, with rupturing capacity 10KA, \"C\" curve type Make: Hager, Legrand, Merlin Gerin(Multi-09). |
| 35 | MCB single pole 240 volts 40 Amps, with rupturing capacity 10KA, \"C\" curve type Make: Hager, Legrand, Merlin Gerin (Multi-09). |
| 36 | MCB three pole & Neutral 440 volts 32 Amps, with rupturing capacity 10KA, \"C curve type Make: Hager, Legrand, Merlin Gerin(Multi-09). |
| 37 | MCB Single pole and Neutral 440 volts 40 to 63 Amps, with rupturing capacity 10KA, \"C\" curve type.Make:- Hager, Legrand, Merlin Gerin (Multi-09). |
| 38 | Tube light fittings surface mounting FRP body corrosion resistance with stove enameled white CRCA gear cum reflector tray complete with gasket and clear acrylic cover 1x40 watts complete with copper wound ballast, starter holder, spring loaded bipin holders, capacitor, connector block all accessories prewired with suitable size cable conforming to cat part No. BJI 136/140 of Bajaj or equivalent of make Phillips/Crompton including 4\",40 watts tube rod and connecting electrically to ceiling rose using cord flexible of size 0.75 Sqmm 3 core overall sheathed. complete all as required and directed. |
| 39 | Lamp holder insulated body with back plate for batten fittings. Make: Cona cat part No. 2151/SSK cat part No. 571 or equivlent of make Leader including CFL 1x11 W of make Bajaj/Crompton/Helonix. |
| 40 | Point wiring one light/fan point controlled by one switch with 1.5 sqmm PVC insulated (FRLS) sheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC insulated (FRLS) sheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit medium grade with all fittings (ISI marked) controlled by one switch including CI/MS sunk box of required size, and as directed by Engr in charge and 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the exising specifications complete all as specified. (Make of cable: L&T/Finolex/Grandlay). |
| 41 | Point wiring one light point controlled by 2 Nos two way switches with 1.5 sqmm PVC insulated (FRLS) sheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC insulated (FRLS) sheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit medium grade with all fittings (ISI marked) controlled by one switch including CI/MS sunk box of required size, and as directed by Engr in charge and 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed. surfaces to match with the exising specifications complete all as specified.(Make of cable: L&T/Finolex/Grandlay). |
| 42 | Point wiring for 3 pin 5 Amps socket out let independent controlled by one switch with 1.5Sqmm PVC insulated (FRLS) sheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC insulated (FRLS) sheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit medium grade with all fittings (ISI marked) including CI/MS sunk box of required size, and as directed by Engr in charge and 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the exising specifications, complete all as specified.(Make of cable: L&T/Finolex/Grandlay) |
| 43 | Point wiring for one 3 pin 15 Amps socket out let independent one flood light controlled by one switch with 2.5 sqmm PVC insulated (FRLS) sheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC insulated (FRLS) sheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit medium grade with all fittings (ISI marked)controlled one switch including CI/MS sunk box of required size, and as directed by Engineer-in-Charge and 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the exising specifications, complete all as specified.(Make of cable: L&T/Finolex/Grandlay) |
| 44 | Total amount ofSCH \"A\"PART-VII (Section-II): LIST OF LEFT OVER WORKS FOR EXTERNALWATER SUPPLY |
| 45 | SCH \"A\"PART-VIII : LIST OF WORKS AND PRICES FOR INTERNAL WATER SUPPLY |
| 46 | SCH \"A\" PART-IX( SEC-I ) :LIST OF WORKS AND PRICE FORFOR PLUMBING WORK |
| 47 | SCH \"A\" PART-IX( SEC-II ) :LIST OF WORKS AND PRICE FORFOR PLUMBING WORK Note : This schedule is not pre priced by MES and the pre priced rate indicated as \"Rs. 0.00\" under Col.5 signifies this fact only. |
| 48 | Cast iron gully traps square mouthed type \"P\" of size 150 mmX 100 mm including excavation and earth work in any type of soil, removal of surplus soil upto 50 metre, PCC 1:2:4 type B-1 in bends, surrounds, kerbs etc and cast iron equal hole grating, not less that 10 mm thick and CI cover of size 450mmX450mm, PGI sheet including jointing with cement complete all as specified and directed. |
| 49 | Total amount ofSCH \"A\" PART-IX( SEC-II ) |
| 50 | SCH \"A\" PART - X (DEFECTIVE ITEMS OF WORKS IN RESPECT OFSCH \"A\" PART -I Ser No -1)Note : This schedule is not pre priced by MES and the pre priced rate indicated as \"Rs. 0.00\" under Col.5 signifies this fact only. |
| 51 | Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises. all as specified and directed |
| 52 | Machine cut kota stone slab flooring/ treads of steps 18-20 mm thick over and incl 20 mm cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor by picking , sweeping clean and washing down with water to remove dust, etcincluding moulding at edge , rubbing and polishing complete all as specified & directed . |
| 53 | Taking down cement plaster on brick walls of any description includingracking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 54 | Rendering 15 mm thickin cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 55 | Demolition of Roofs, floors (other than ground floors), beams staircases, landing, chajjas, & similar suspended work Cement concrete (reinforced) complete all as specified. |
| 56 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified. |
| 57 | M&L RCC M-30 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. |
| 58 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified. |
| 59 | M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified. |
| 60 | Total amount ofSCH \"A\" PART-X |
