Tender For Work Of Boring Of 180 Meter Depth And Installation Of Machinery For Main Irrigation System And Fountain Operation Of Nimbu Park. - Transportation Of D.C. Rig Machine & Its T&P From Store To The Site Of Tubewell. 2 Transportation Of T.W. Assem, lucknow-Uttar Pradesh

Tender For Work of boring of 180 meter depth and installation of machinery for main irrigation system and fountain operation of Nimbu Park. - Transportation of D.C. Rig machine & its T&P from store to the site of tubewell. 2 Transportation of T.W. Assembly From Store to the site of Tubewell. 3 Transportation of 600 P.S.I Air Compressor and its T&P from store to the site. 4 Transportation of O.P Unit and its T&P from store to the site. 5 Tube Well Assembaly 6 300 mm. dia 7.1 mm thick MSERW Housing Pipe 7 300x200 mm dia M.S Reducer 8 200mm dia 7.1 mm thick MSERW Plain Pipe 9 200mm dia 7.1 mm thick MSERW Slotted pipe 10 200mm dia Bail Plug 11 300 mm dia M.S. Clamp 12 300 mm dia Well Cap. 13 300 mm dia M.S. Ring 14 200 mm dia M.S. Ring 15 300 mm dia Tubewell assembly support 16 200mm M.S. Centre Guide 17 Supply of Lal Kuan quarry Pea Gravel 1.6 to 4.8 mm. size duly screened, washed and stacked, with carting loading, unloading complete at site 18 Installation of Rig Machine alongwith dressing the site of work then drilling by 200/ 300 mm size bit upto required depth then reaming by450mm, 550mm, and 675mm size bits, after drilling the dismantling work will be done. 19 Erection of DC Rig Machine, T&P and camp equipages 20 Dismantling of Rig Machine and its T&P 21 Drilling of 675 mm dia bore from GL to 80 M. BGL 22 Drilling of 550 mm. dia Bore from 80 M to 120 M. BGL 23 Drilling of 550 mm. dia Bore from 120to 160 M. BGL 24 Drilling of 550 mm. dia. Bore from 160 to 180M. BGL 25 Water arrangement charges for during the drilling (UPJN-2019-20-EP-(26)Attached) 26 Logging of bore hole by Electric logger (UPJN-Oder Attached) 27 Barricading of site for safety with necessary T&P and required labour etc. complete.(UPJN-Order Attached) 28 Lowering of 300/200 mm dia size tubewell assembly from ground level to 370 M below ground level including gravelling work etc. complete. 29 (A)300mm dia Housing Pipe from G.L to 66 M. BGL. 30 (B)200 mm. dia Plain/Slotted Pipe From 66 M. BGL to 80 M BGL 31 (C)200 mm. dia Plain/Slotted Pipe From 80 M. BGL to 120 M BGL 32 (D)200 mm. dia Plain/Slotted Pipe From 120 M. BGL to 160 M BGL 33 (E)200 mm. dia Plain/Slotted Pipe From 160 M. BGL to 165 M BGL 34 Erection of 600 PSI Air-Compressor, T&P and camp equipages 35 Development of T.W. by 600 P.S.I. Air Compressor upto 100 hrs 36 Dismantling of Air Compressor and its T&P 37 Erection of O.P. Unit, T&P and camp equipages 38 Development of T.W. by O.P. Unit upto 150 hrs 39 Dismantling of O.P. Unit and its T&P 40 Yield and verticality test of T.W. alongwith Chemical and Bacterialogical analysis of tubewells water. 41 SUPPLY OF FOLLOWING ITEMS 42 S/F of 20 H.P Clear water submersible pump complete with electric motor capable to operate on 415± volts 3 phase 50 c/s A.C. supply of 1000 LPM, 60 mtr Head (1200LPM 45M head 20HP) 43 (UPJN-2019-20-PP -2 Attached) 44 S/F of 20 H.P. switch gear along with starter and control panel, cabel etc. Complete 45 (UPJN-2019-20-PP -1 Attached) 46 MAIN PIPING AND VALVES(a) S/F of 150 mm dia 5.4 mm thick M.S. column pipe with both end flanged and groove for passing of submersible cable in each lenth in 3m long Total 24 m with 1m long top pipe with cap (Damdam) and sealing ring. (10 Nos.)(b)S/F of CI-D/F 90 bend of size 150 mm dia. (01 Nos)(c)S/F of CI-A/F tee of size 150 mm dia. (01 Nos) (d)S/F of M.S. Distance piece of 150 mm dia 1.00m long 2 Nos and 1.5m long 1 No. (03 Nos) (e)S/F of M.S. enlarger/reducer of suitable size. (01 Nos)(f)S/F of 150mm dia Sluice Valve with hand wheel (Confirming to15.780/I.S.2905) ( 02 Nos))(g) S/F of 150 mm dia Reflex Valve (Confirmeing to IS-5312 part-1) (UPJN-2019-20-PP -4 Attached) (01 Nos)

INR 1475 /-

INR 125000.0 /-

Refer document