|
| 1 | Supply and fabrication of embeded partsconsisting of wall liners- 2000x140x8 mm thick 2 Nos, wall liners-2000x100x8 mm 4 nos sill beam- Half cut ISMB200 of 1500 mm - 1no, Side seal SS seat - 2000 x 60 x 6 - 2 nos, Sill beam SS seat- 1400x60 x 6 - 1 no,1st stage embedmnents, dia 16 studs,nuts,bolts, washer- 10kgs with all accessories including machinery, fixtures, labour, cutting, alligning, welding, cleaning, finishing, including consumables, all complete as per direction of Engineer- in-charge.The cost is inclusive of contractor profit @7.5% and labour cess @1%. |
| 2 | Supply and Fabrication of vertical lift sliding Gate leaf consisting ofskin plate- 1400x1000x8mm 1no, End vertical girders-1000x65x10mm- 2 nos,Horizontal girders- ISA 65x65x6 1380mm 3 nos, Diaphrgm-1000x50x8 -3nos,side seal mounting- MS flat 1000x40x8 mm 2 nos,Side seal clamp plate- MS flat 1000x35x8 mm 2 nos, pad base - plate 80x30x25mm 4 nos,Bronze pad-80x30x12mm- 4 nos, Btm seal-10mm thick-1400 mm lomg- 1 no, Btm. seal clamp plate- MS flat 1400x50x8 mm 1 no, Side seal 25mm dia- 1000mm long-2 nos,lifting bracket 533.333x115x12 -2nos, lifting pin -130 dia 30 -1no, C/s Screw, bolt/nut etc-6kg with all accessories including machinery, fixtures, consumables, labour, cutting, drilling & boring, alligning, welding, cleaning, finishing all complete as per direction of Engineer-in- charge.The cost is inclusive of contractor profit @7.5% and labour cess @1%. |
| 3 | Supply and Fabrication of Steel hoist bridge for single stem Nut type screw gear box hoist consisting ofbase plate- 400x200x8mm 4nos,CI gear box base plate- 400x300x16mm -1no,supporting beams- ISMB 200- 2000 mm length 2 nos,anchor bar- Dia 20mm -350mm length 16 nos,chequered plate- 1700x750x6mm - 1 no,railings-ISA50x6-2600x50-3nos, railings-ISA50x6-1000x50-3nos, railings-ISA50x6-1000x50-3nos, with all accessories including machinery, fixtures, consumables, labour, cutting, alligning, welding, cleaning, finishing all completeas per direction of Engineer-in- charge.The cost is inclusive of contractor profit @7.5% and labour cess @1%. |
| 4 | Erection, positioning, alligning, fixing, trial and commissioning including unloading and shifting upto location of all componentsof 1st stage and 2nd stage Embedded parts (consistingof sill beam, wall liners, track plates etc),Vertical Gate leaf (complete assembly with fixing of bronze pad, rubber seals), Steel hoist bridge assembly (consisting of hoist platform, Screw rod, lifting gear box,supporting beams, base plates, anchor bolts etc) with all accessories including machinery, fixtures, labour, cutting, alligning, welding, cleaning, finishing total 582.30 kgs per gate fpr 04 nos gate 2329.2kg including consumables all complete as per direction of Engineer in charge. The cost is inclusive of contractor profit @7.5% and labour cess @1%. |
| 5 | Painting cost of Embeded part (With one coat Zinc primer & 3 coats of Coal tar epoxy paint), GateLeaf (With one coat Zinc primer & 3 coats of Coal tar epoxy paint),Hoisting Platform (With one coat Zinc primer & 3 coats of Aluminium paint) as per direction of Engineer in charge.The cost is inclusive of contractor profit @7.5% and labour cess @1%. |
| 6 | Labour charges for vent cleaning-Helper 2 Nos for one day,Construction of coffer dam by sand bag 40nos. @ Rs30/- and dismantling after completion of work including cost of labour and sand bag , pump with 10HP Diesel engine for dewatering of entrapped water- 8 Hrs, Watch and Ward,-2nos for 2days,2nd stage Concreting -0.51cum, 2nd stage Concrete cutting - 0.67 cum as per direction of Engineer- in-charge..The cost is inclusive of contractor profit @7.5% and labour cess @1%. |
| 7 | Supply of following bought out materials per gate LTB-1 Bronze pad of size 80 x 30 x 12mm - 4 nos.,Bottom Seal( plate-75x10mm ) - 1400 mm- 1 no,Side Seal( Ф25-70x10mm )- 1000 mm-2 nos,1st stage embedments, Ø16 Studs, bolts, nuts, washers etc. 20Kg, Nut type screw Gear boxassembly suitably square threaded for 63 mm Dia screw rod - 1 no, anchor bars 16 nos,liting pin - 1no,Screw rod 63mm Dia suitable square threaded to M62x9 including cost of material, straightening and machining. -1.3Meter Long- 1 No, 63mm Dia Round-2.1M - 1no, Lubricant like grease & mobil - 2 kg,Gate Lifting Handle 1 no., Anchoring Adhesive -2Kg as per direction of Engineer in charge. The cost is inclusive of contractor profit @7.5% and labour cess @1%. |
| 8 | Transportation charges (Truck & Tractor) Steel material from SAIL stockyard to workshop and finished gate from workshop to work site(50km)with all bought out and erection material including cost of loading & unloading 1 trip as per direction of Engineer in charge. The cost is inclusive of contractor profit @7.5% and labour cess @1%. |
