Tender For Construction Of Common Toilet At Gail New Colony; 1 Site clearance by demolition of P.C.C / R.C.C./Brickwork/Stone Masonry/Stone Soling, Flexible pavements/fittings etc. along with removing the debris and disposal of unserviceable material to any lead and staking of serviceable materials, handing over serviceable material to concerned department if required as per technical specifications and direction of Engineer-in-charge.Note:1. Rate includes cost of all labour, tools, tackles, hire charges, royalties, levies, leads, loading/unloading, transportation, water, electric power, illumination etc. complete in all respects as per scope of work, detailed construction drawings, technical specifications and direction of Engineer-in-charge.2.Demolition of RCC/PCC/Brick Masonry/Road will be paid in NET CUM as demolished. 2 Dismantling pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :Above 40 mm nominal bore 3 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. 4 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil. 5 Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:4:8 by volume (1 Cement: 4 Coarse Sand: 8 Crushed Stone Aggregates/Gravels with 40mm and down size graded crushed stone aggaregates. 6 Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUB-STRUCTURE of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipeencasement, catchpits, drains, RCC pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. 7 Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, windowsills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/machine foundations, ramps etc. (including single pour concreting upto 250m3) including cost of admixtures if used providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all heights above plinth level in any shape, position, thickness etc. all complete as specified, shown and directed. 8 Providing and fixing CENTERING AND SHUTTERING in foundations, footings, raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/silos/ shafts/ hoppers/liquid storage structures etc. including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 9 For Foundation 10 For Super Structure 11 Supplying and placing in position HIGH STRENGTH DEFORMED STEEL BARS REINFORCEMENT (conforming to IS:1786, Grade Fe 415), for R.C.C. work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractors own 16 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed. 12 Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 7.5 in cement mortar 1:6 (1 Cement : 6 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all depths and height including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications. 13 External Wall PlasterProviding and laying of ordinaryplaincementplasteraverage15mmthick1:6(1cement: 6 sand) in single / two layers over brick wall / concrete surfaces, including hacking the concrete surface (RCC Wall / Column / Beam etc.) in foundation / superstructure. Rate to include cost of all labour, material, scaffolding curing, hacking the concrete surface etc., all complete. 14 External Wall Painting1. Surface preparation prior to waterproofing application as per detailed technical specification.2. Providing and applying one coat of modified acrylic, water-based alkali resistant primer-cum-sealer with silicone additives of approved make (AsianPaints/Berger/Nerolac) as per product specification.3. Providing and applying first coat of fiber reinforced elastomeric liquid of approved make (AsianPaints Smartcare/Berger HomeShield/Nerolac Perma) as per product specification.4. Providing and applying second coat of fiber reinforced elastomeric liquid of approved make (AsianPaints Smartcare/Berger HomeShield/Nerolac Perma) as per product specification.5. Providing and applying first coat of Acrylic smooth emulsion with silicon additives paint of approved make (AsianPaints Apex or Apex Suprema/Berger Weather Coat Anti Dust/Nerolac Excel Mica Marble) as per product specification.6. Providing and applying second coat of Acrylic smooth emulsion with silicon additives paint of approved make (AsianPaints Apex or Apex Suprema/Berger Weather Coat Anti Dust/Nerolac Excel Mica Marble) as per product specification.Note: All the above-mentioned products must be of same make. E.g. Primer+ waterproofing coat +topcoat paint must be of one brand. No other make of Painting System except the makes and products mentioned above shall be acceptable. 15 MANHOLEConstruction as per Standard drawing of brick masonry (brick class shall be as mentioned below) inspection chambers/manholes of 457mmx457mm internal size 1000mm deep(Max.) in cement mortar 1:4 (1 cement: 4 sand) with CI frame and cover 500mm clear dia, (circular Medium duty of grade MD-10) conforming to IS:1726 fixed on RCC slab of M-30 grade, necessary excavation, supplying, fixing 4 Nos. 16mm dia M.S. rungs, M-20 grade foundation concrete 1:3 cement mortar(1 cement: 3 sand) plastering of 13mm average thickness for inside & 16mm avg. thickness for outside exposed surfaces, backfilling, disposal of surplus earth upto a lead of 100M, benching with M-20 grade cement concrete and rendering smooth with a neat coat of cement slurry, painting the C.I. frame and cover with two coats of chlorinated rubberzincphosphateprimer@40µDFTpercoatandfinishpainting consists of two coats of chlorinated rubber paint@40µ DFT per coat etc. all completeasperdrawings,specificationsanddirectionsofEngineer-in- Charge. 16 Providing and fixing 12mm Frosted toughned float glass of approved brands (Saint Gobain, Sisecam, Modi Gaurd) along with aluminium glass edge protector having minimum 1.2 mm to 4mm thickness covering 15 to 20 mm on all the edges complete as per direction of Engineer-In-Charge.The price is inclusive of making holes/cutouts required for fixing fittings like floor spring, patch fittings, patch locks etc. in toughened glass wherever required as per direction of EIC. 17 Providing and Fixing of all fittings as per direction of Engineer-In-Charge.Note: The hardware should be used of brands like Ozone,Hafele, Hettich,Taiton. 18 Double action double cylinder hydraulic floor spring of 120 kg (black) 500000 cycle tested , for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates complete as per the direction of Engineer-in-charge. 19 Top patch 20 Bottom patch 21 Pivot 22 Half Moon Door stopper (black pvdf/ teflon/ electrolating) 23 Glass to glass lock or glass to wall lock 24 Handle (25mm*302mm*450mm) h type 25 Aluminium glazed window/ventilator with approved make sections, frictionhinges,castaluminiumhandle,etc.allcompletewithapproved shade electrostatically powder coated aluminium sections and 6.3mm thk. laminated glass as per IS:2553. Openable type. 26 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 27 NAHANI TRAP / with coverCost of providing and fixing Nahani trap/ P trap set with SS Jali/cover in 1:2:4 concrete and jointed with spun hemp & doing necessary lead caulking and making necessary 1:2:4 concrete cistern, when req. and plastering with water-proof compound to a smooth finish . 28 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm 29 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of SINTEX/Penguin/Supreme, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 30 Providing and Fixing SWR Rigid PVC pipes including all fittings such elbow,coupler,union,etc conforming to IS:13592 Typr C,including Jointing with seal conforming to IS:5382 leaving 10mm gap for thermal expansion 31 75mm diameter 32 110mm diameter 33 Providing and fixing 75mm NR Valve fixed with necessary accessories. 34 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 35 15 mm nominal dia Pipes 36 20 mm nominal dia Pipes 37 25 mm nominal dia Pipes 38 40 mm nominal dia Pipes 39 Providing and laying vitrified floor tiles of size 600 x 1200 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make (Kajaria,Somany,Exaro,Asian Granito), in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with Epoxy and matching pigments etc., complete 40 Providing and laying gang saw cut, mirror polished premoulded and pre polished machine cut granite stone of required size 18 to 20 mm thick and shape of approved shade, colour and texture, laid with cement based chemicals as approved makes (Roff, Sika, MYK Laticrete) grouting base the joints with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete as per direction of Engineer-in-Charge 41 Providing and fixing table top basin with fixing accessories all complete of make Jaquar: Product id -JDS-WHT-25907N or Kohler: Product id -K-25316IN-0 42 Providing and fixing Sensor Faucet for Wash Basin including all fittings, of make Jaquar: Product id -SNR-51449 or Kohler: Product id -K-24270IN-ND-CP 43 Providing and fixing Waste Coupling for Wash Basin including all fittings, of make Jaquar: Product id - ALD-727L130 or Kohler: Product id -K-45432IN-CP 44 Providing and fixing Bottle Trap for Wash Basin including all fittings, of make Jaquar: Product id -ALD-769L300x190 or Kohler: Product id -K-16407IN-CP 45 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved make Jaquar and Kohler 46 Providing and fixing 2 way C.P. brass bib cock including all fittings, of make Jaquar: Product id -VGP-81041 or Kohler: Product id -K-25432IN-4-CP 47 Providing and fixing Toilet Roll holder with stainless steel flap including all fittings, of make Jaquar: Product id -AKP-35753PS or Kohler: Product id -K-5633IN-CP 48 Providing and fixing Automatic Soap Dispenser with Complete Set of make Jaquar: Product id - SDR-BLC-DJ0160AS or Dolphy: Product id -DSDR0112-S 49 Providing and fixing HAND DRYER with Complete Set of make Jaquar: Product id - HDR-SLV-AK2030, Dyson: Product id - Airblade Db 50 Providing and fixing Hand Shower (Health Faucet) including all fittings of make Jaquar: Product id -ALD-573 or Kohler: Product id -K-98100IN-0 51 Providing and fixing Urinal with fixing accessories complete including all cutting and making good the walls and floors wherever required, of make Jaquar: Product id -URS-WHT-13263 or Kohler: Product id -K- 26475IN-ER-0 52 Providing and fixing Urinal Sensor Complete Set with Installation Box (Battery Operated) complete including all cutting and making good the walls and floors wherever required, of make Jaquar: Product id -SNR-STL-51087 or Kohler: Product idK-24199IN-C01-CP 53 Providing and fixing WC with seat cover, Hinges, Fixing Accessories Set, S/P-Trap complete including all cutting and making good the walls and floors wherever required, of make Jaquar: Product id -DRS-WHT-37953BIUFSM or Kohler: Product id - K-20217IN-S-0 54 Providing and Fixing Concealed Tank, Installations Kit including all cutting and making good the walls and floors wherever required, of make Jaquar: Product id -JCS-WHT-2400S or Kohler: Product id -K-26351IN-M-NA 55 Providing and Fixing Control Plate (Flush Plate) including all fittings, of make Jaquar: Product id -JCP-CHR-352415 or Kohler: Product id -K-28476IN-M-CP 56 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes with all fittings such as elbow,coupler,clamps,etc conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter 57 Providingandapplyingpolyetherbasedpolyurethane(PU)waterproof coatingconsistingof2components(resin+hardener)infourcoats consistingofaprimeradhesioncoatandthreesealingcoatsappliedby brushevenlytoperfectlevel@min.160gm/sq.MpercoatoverR.C.C. slab including sprinkling the last coat of P.U. with a layer of clean sand (300 micron) and laying min. 50mm thk. PCC (1cement :2coarse sand :4 aggregate) over the fully cured coating in panels of max. 1.2M x 1.2M with 24 SWG chicken wiremeshfinishedsmooth and sealing joints between panels with Polysulphide sealant as per approved manufacturers spec. and including preparing the base surface (levelling, cleaning, filling upcrackswiththinpasteofPolyurethanefillingcompound)providing fillets of 75mm radius with PCC (1 cement : 2 coarse sand : 4 aggregate) atjunctionsofhorizontalandverticalsurfaces,continuingthewater proofing on vertical face to a minimum ht. of 150mm over finished roof surface,terminatingit incontinuousgrooveof 10mmx 20mmand filling with polyurethanesealent putty, continuing the treatmentinto rainwateroutlets by,providing 450mm x450mm khuras atalloutlets, levelled down by min. 25mm, finishing all complete. Cement supplied by the Contractor at their cost. 58 Internal PlasterProviding and laying of ordinaryplaincementplasteraverage12mmthick1:4(1cement: 4 sand) in single / two layers over brick wall / concrete surfaces, including hacking the concrete surface (RCC Wall / Column / Beam etc.) in foundation / superstructure. Rate to include cost of all labour, material, scaffolding curing, hacking the concrete surface etc., all complete. Cement supplied by the Contractor at their cost. 59 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 60 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including primer and applying additional coats wherever required to achieve even shade and colour.Two coats 61 Providing and fixing roof screed (1:2:4)with necessary accessories. 62 Providing and fixing Stainless Steel Hand Rail at 1m height with necessary accessories. 63 Providing and laying vitrified wall tiles of size 600 x 1200 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make (Kajaria,Somany,Exaro,Asian Granito), in all colours and shades, laid with tile adhesive of approved make (Roff,Sika,MYK Laticrete) including grouting the joints with Epoxy and matching pigments etc., complete 64 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board 65 Supply, installation, testing, commissioning of Indoor Lighting Fixtures suitable for 18/26/36W LED Lamps for including all fixing arrangements and all material and labour as per specifications, drawings and instruction of EIC. Work to be completed in all respects. 66 Supply, installation, testing, commissioning of 150mm sweep Exhaust fans (safe area) for including all fixing arrangements and all material and labour as per specifications, drawings and instruction of EIC. Work to be completed in all respects. 67 Design, Engineering, supply, erection, termination, earthing and commissioning of Guard room DB complete in all respects.16 Amp DP MCB as incomer, 30A SPN, Cu Bus Bar and 2nos. 6A DP MCBs and 4 nos. 16 A DP MCBs as out goings. 68 Supply, installation, testing, commissioning of Modular Switch Board for including all fixing arrangements and all material and labour as per specifications, drawings and instruction of EIC. Work to be completed in all respects. 69 Supply, installation, testing, commissioning of 5/15A Switch Socket for including all fixing arrangements and all material and labour as per specifications, drawings and instruction of EIC. Work to be completed in all respects. 70 10 SWG GI wire 71 PVC Conduit including bend,tee, clamps,JB and other required assesories 72 Supply, laying, installation, termination, testing, commissioning of 1100 Volt PVC insulated, PVC sheathed and armoured / unarmoured cables in trenches, excavated underground / trays, pulling through pipes and its proper sealing including underground trench and supply of hume pipes for road crossing, etc. as required as per specifications and drawings approved by the company. 73 3C x 6 sqmm CU FRLS XLPE 74 2.5 sqmm CU Wire 75 Supply & Installation of 15W Round LED Down Light on ceiling of Including cutting and making good wherever required of approved make, Jaquar, Havells and Philips. 76 Supply & Installation of 10W Spotlight Including cutting and making good wherever required of approved make, Jaquar, Havells and Philips. 77 Supply & Installation of Surface mounted round sensor Including cutting and making good wherever required of approved make,Jaquar, Havells and Philips.
