Tender For New Electrification Work In Ramganj Mandi Assembly Constituency In Nagar Nigam Kota South. - 1 Work Name 2 Supply And Erection Of P.C.C. Pole As Per Rec Manual No 15/1979 (Ammended Upto Date) And As Per Latest Discom., kota-Rajasthan

Tender For New Electrification Work In Ramganj Mandi Assembly Constituency In Nagar Nigam Kota South. - 1 WORK NAME 2 Supply and erection of P.C.C. pole as per REC manual no 15/1979 (ammended upto date) and as per latest Discom specifications with factorofsafety2.5 includingexcavationofpituptopoleplanting depth1/6thofpolelength.andbackfillingwithstone aggregate/boulders and soil by ramming and watering etc complete asrequired.AllasperpreapprovedbyEngineerin-charge.For additional technical parameters of product / work refer Annexure A attached with this BSR 8.0 Mtr long PCC pole of 200 Kg Working Load 3 SupplyanderectionofGIstaysetconfirmingtopattern-1of BS:16/1974 and as perlatest DiscomSpecificationscomplete with stay rod with anchor plate fitted with cast iron cross head and steel bow,incementconcrete1:3:6includingexcavationofpit-re-filling etccompleteasreqd.AllasperpreapprovedbyEngineerin- charge.Foradditionaltechnicalparametersofproduct/workrefer Annexure A attached with this BSR Stay setof dia20mm, 2.4mlong stay rod and anchor plate 380 x 380 x 4.0 mm 4 SupplyandfixingoffollowingLTSupportingaccessorieswithnut bolt&ClampsmadeoutasperstandardDiscomsspecifications with two coats of Red oxide and two coats of Aluminium paint etc. as required. All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure A attached with this BSR LT cross arm 600 mm long with clamp 5 LT cross arm 1200 mm long with clamp 6 Supply and fixing of LT porcelain pin insulator as per IS 1445-1997 andasperDiscomsstandardspecifications,suitableforworking voltage1100voltsincludingallaccessorieslikeMSForgedGILT Pin confirming to IS:7935/1975 (latest amended) Nut, Boltetc.as required. All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure A attached with this BSR. 100 mm x 70 mm 7 Supply andfixing ofLTporcelainshackleinsulatorasperIS:1443 1979andasperDiscomsstandardspecifications,suitablefor working voltage 1100 volts including all accessories like GI Hardware fittings confirming to IS:7935/1975 (latest amended) Nut, Boltetc.asrequired.AllasperpreapprovedbyEngineerin- charge.Foradditionaltechnicalparametersofproduct/workrefer Annexure A attached with this BSR 75mm x 90mm 8 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure A attached with this BSR.6.0 Sq. mm. 4 Core 9 Providing & Fixing of IP - 65 protected impact resistant polycarbonate / Polysterene enclosures with knock out for cable entry/out including fixing with nut, bolt, fatner etc as required complete in all respect of following sizes.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. 250 x 200 x 115 mm 10 Providing&FixingofIK08,IP66protectedLEDStreetLight Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipationfinsonhousingwithUVstabilizedPC(UVstablization reportsubmittedforUVcover)/ToughenedGlasscoverand secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver& has a unique BIS R number with Input Voltage AC 120 to 270 V AC with HighvoltageCutoff@>=300VACandAutoresettingSafety, Power Factor >0.95 driverEfficiency >85%,THD(I) <10%Humidity 10% to 90% RH Working Temp -5C to 45C .driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal ormorethan50000burninghrswithMinimum 70%lumenmaintened,CRI>70andCCT5700K+355K.Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs.Manufactures Word Mark/Name Engraved/Embossingondiecasthousingtoallow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for alltestingfacilitiesforLEDfixtures. (LM79/LM80)Certificate/ report with liable warranty of product/accessories from OEM shall be submitted.AllasperpreapprovedbyEngineerin-charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR. LED Street Light fixture with Minimum lumen output 3700 lm 11 Providing&FixingofStreetlightbracketmadeoutfromfollowing size of B class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with heavy duty pole clamp, Saddles suitable fastners etc. asrequired.AllasperpreapprovedbyEngineerin-charge. For additional technical parameters of products/ work, referAnnexure A attached with this BSR. 25 mm Dia. 12 Supply&drawingWiringforsubmainsISImarked(IS:694)1100 VoltsgradePVCinsulatedflat twincoresheathed solidaluminium conductorwith10SWGG.I.Supportwiredulyclippedetc.as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 4.0 sq.mm 13 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 14 Supply & fabrication steel structure with MS channel / angle / joist / ISMB /sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 15 Providing and Laying RCC Foundation for Octagonal / ConicalStreet Light poles, High mast Poles as per Drawing attach at TableP-4 with Following Procedure & All as per pre approved byEngineer in-charge. For additional technical parameters of products/work , refer Annexure A attached with this BSR .A) Excavation of Pit for Foundation Size upto required depth fromGround levelB) Dressing of Pit and Dry stone pitching 200 mm thick includingsupply of stones and preparing surface complete.C) Providing and laying in position cement concrete of M-10 grade of75 mm thicknessD) Reinforcement for R.C.C. work with TMT bars includingstraightening, cutting, bending, placing in position and binding allcomplete.E) Centring and shuttering including strutting , propping etc. andremoval of form work for Footing and PedestalF) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe &Foundation Bolt with template as per OEM Recommendations.G) Providing and Laying Reinforce cement Concrete of M-25 gradein Footing and Pedestal including Curing the foundation for 7 days.H) Providing and Fixing Nosing Angle 40 mm x 40 mm x 6mm with 2no. 100 mm long, 10 mm dia. Lugs on each face. Pole Foundation for Octagonal pole from 7 Mtr. To 9 Mtr

INR 2500 /-

INR 47.58 Lakhs /-